Welder/Generator/Air Compressor includes battery charger.
Electrical Power Generators

Welder/Generator/Air Compressor includes battery charger.

Available with internal 12/24 V battery charger and jump starter, Trailblazer® 302 Air Pak(TM) welds at up to 350 A, and provides 13,000 W of Accu-Rated(TM) generator power, 26 cfm compressed air, and 450 A of battery jumping power. Charger delivers power until it senses load from starter to eliminate battery failure. Driven by 30 hp Kohler gas engine, 59½ x 20 x 34¼ in. welder provides...

Read More »
Single-Phase MIG/FCAW Welder delivers 30-250 A output.
Arc / Resistance Welders

Single-Phase MIG/FCAW Welder delivers 30-250 A output.

Suited for mild steel material ranging from 24 Ga to Â-½ in., DC/CV IronMan(TM) 230 features 12 voltage taps for precise control of welding arc. It has cast aluminum 2-roll wire drive system and patented hub design that requires no tools to adjust for variety of spool sizes (1, 2, 10, and 45 lb). Other features include 2 cable hangers mounted on unit's side for holding power cord, MIG gun...

Read More »
Sonobond Ultrasonics Offers a Wide Selection of Ultrasonic Bonding Machines for Woven and Nonwoven Textile Applications
Textile Cutters and Cutting Machinery

Sonobond Ultrasonics Offers a Wide Selection of Ultrasonic Bonding Machines for Woven and Nonwoven Textile Applications

Manufacturers look to Sonobond technology for reliable, environmentally-friendly assembly of medical disposables, automotive filters, body armor, evening gowns, blankets, and a host of other products. WEST CHESTER, Pennsylvania - Sonobond Ultrasonics announced today that it now has 10 machines, plus several modules for original equipment manufacturers (OEMs), that provide fast, reliable, and...

Read More »
Flexible Robotic System suits pipe welding/cutting jobs.
Robots

Flexible Robotic System suits pipe welding/cutting jobs.

Suited for automated carbon steel, stainless steel, or duplex stainless steel pipe welding and fabricating, RoboPipe(TM) is driven by Power Wave® 455M/STT® welding machine rated to deliver 450 A, 38 V at 100% duty cycle or 570 A, 43 V at 60% duty cycle. Waveform Control Technology® and Surface Tension Transfer® are also included, along with ability to weld pipe root with...

Read More »
Traceability in Ultrasonic Welding: Unique Device Identification
Barcode Scanners / Readers

Traceability in Ultrasonic Welding: Unique Device Identification

In order to improve patient safety, the FDA signed into law a Unique Device Identification (UDI) system. Although a national UDI system has not been created, the FDA is working on a timeline in order to have a national standard. In the mean time forward thinking manufacturers of medical devices are considering their options on how to meet this standard. Diligent process documentation is becoming...

Read More »
Engine-Driven Welder/Generator performs in extreme conditions.
Electrical Power Generators

Engine-Driven Welder/Generator performs in extreme conditions.

Offering 500 A for DC stick and DC TIG welding as well as up to 5/16 in. carbon arc gouging, Big Red(TM) 500 is built using reactor technology and 3-cylinder Deutz® D2011L3i oil/air-cooled industrial diesel engine. This 32 hp, 1,800 rpm engine is EPA Tier 4i-rated and includes protection for low oil pressure and high temperatures. Rated for operation up to 131°F, product is supplied...

Read More »
Portable, Engine-Driven Welder incorporates AC generator.
Arc / Resistance Welders

Portable, Engine-Driven Welder incorporates AC generator.

Driven by 10 hp gasoline engine, Outback® 145 suits jobsite and outdoor welding applications where portable DC stick welding and AC generator power are needed. It delivers 145 A of smooth DC output welding for use with up to 1/8 in. stick electrodes on steel, stainless steel, cast iron, and hardfacing projects. Single, full-range, calibrated welding output dial facilitates setting of...

Read More »
Punch/Laser Combination Machine suits sheet metal fabrication.
Machining Centers

Punch/Laser Combination Machine suits sheet metal fabrication.

Combining punching, laser cutting, and laser welding in one system, TruMatic 3000 Fiber shares fiber-guided TruDisk laser with TruLaser Robot 5020 cell in TRUMPF LaserNetwork. TruDisk 3001 provides 3 kW of laser power and can switch from one application to another in milliseconds. When combination machine is performing punching operations and laser is not required, its energy is available to...

Read More »
Manufacturers Praise Sonobond Ultrasonics' Spot Welding Technology aast, Energy-Efficient, and Ultra-Reliable
Friction / Fusion Welders

Manufacturers Praise Sonobond Ultrasonics' Spot Welding Technology aast, Energy-Efficient, and Ultra-Reliable

Lake Cable, LLC reports "outstanding results" from their specially modified SonoWeld® 1600 Digital Metal Spot Welder used for encapsulating cables in metal sheathing. WEST CHESTER, Pennsylvania, February 19, 2008-Sonobond Ultrasonics announced today that increasing numbers of companies are relying on its microprocessor-controlled spot welding technology. According to Janet Devine, president of...

Read More »
Polar Uses Cencorp's Laser Welding System in the Manufacturing of Top Heart Rate Monitoring Products
Heart Rate Meters

Polar Uses Cencorp's Laser Welding System in the Manufacturing of Top Heart Rate Monitoring Products

Polar, the market leader and pioneer in heart rate training technology, and Cencorp, a global supplier of end of line automation solutions for manufacturing, have achieved outstanding results utilizing Cencorp's laser welding technology. Polar achieves high quality laser welding on their plastic training computer components by using a process where the laser beam is guided along the welding path...

Read More »

All Topics