Waveguides

Waveguide Bends operate up to 90 GHz across 12 frequency bands.
Waveguides

Waveguide Bends operate up to 90 GHz across 12 frequency bands.

Operating acrossÂ- C to W bands, waveguide bends do not degrade transmission signal in waveguide systems where signal is required to turn or bend 90°. E- and H-plane configurations are available constructed of gold-plated, oxygen-free hard copper, or painted copper alloy (depending on the model). Along with VSWR as low as 1.08:1, these 30 unique models come in sizes from WR-137 (5.85...

Read More »
Development System evaluates high bandwidth data rates.
Signal Receivers

Development System evaluates high bandwidth data rates.

With PEM009-KIT 60 GHz Development System, designers can perform product development and experimentation of single and multi-carrier high bandwidth modulation covering 57–64 GHz in globally unlicensed ISM frequency spectrum. System incorporates Transmit (PEM001-MIM) and Receive (PEM002-MIM) WR-15 waveguide modules that utilize SiGe BiCMOS semiconductor technology. It supports I/Q and FSK/MSK...

Read More »
Waveguide Twists operate from 18-110 GHz across 7 bands.
Waveguides

Waveguide Twists operate from 18-110 GHz across 7 bands.

Available in sizes from WR-42 (18 GHz) to WR-10 (110 GHz) and suitable for waveguide systems requiring gradual turn in polarization and waveform, precision 45° and 90° waveguide twists prevent unwantedÂ- signal transmission distortion. Gold-plated brass construction offers electrical performance with VSWR as low as 1.02:1 and insertion loss as low as 0.2 dB. Square and...

Read More »
RF Attenuators

Athermal AWG suit extreme temperature applications.

Based on optical packaging technology, Super Athermal AWGs can be used for such channel-dense DWDM applicationsÂ- as 25 GHz DWDM as well as extreme-temperature (-40 to +85°C) operating environments for outside-plant deployments. Products can be made to support total of 20 pm or less wavelength drift, which is equivalent to 0.15 pm/°C shift.

Read More »
Flexible/Twistable Waveguides operate to 40 GHz over 9 bands.
Waveguides

Flexible/Twistable Waveguides operate to 40 GHz over 9 bands.

Available in 36 models ranging in size from WR-137 (as low as 5.85 GHz) to WR-28 (up to 40 GHz), flexible waveguide twists act asÂ- malleable conduit in waveguide systems where no perfect alignment exists for traditional rigid waveguide section. Products flex in both E and H planes as well as twist and utilize helically wound, silver-coated brass strips surrounded by neoprene...

Read More »
Electrical Connectors

Waveguide Power Sensor provides E-band power measurements.

Designed with WR-12 flange connector, E8486A Waveguide Power Sensor makes precise power measurements in E-band spectrum of 60–90 GHz. Unit comes with 80 dB dynamic range option, allowing sensor to measure from -60 to +20 dBm instead of standard -30 to +20 dBm range. To facilitate calibration, sensor incorporates 50 MHz calibration port, eliminating uncertainties due to temperature...

Read More »
Lasers

Jenoptik to Introduce New Laser Technology and Optics at LASER 2013.

Jenoptik will show its new and enhanced laser technology products and optical systems as well as demonstrate its system integration expertise at the LASER 2013 trade show, to be held in Munich from May 13 to16, 2013. The company is also sponsoring a special exhibition to support the 40th anniversary of the worlds leading trade show for photonics. The exhibited products of the Lasers Material...

Read More »
Surgical Waveguide combines illumination and suction.
Waveguides

Surgical Waveguide combines illumination and suction.

Combining hand-held illumination and Yankauer suction, Eigr™ Saber Waveguide enable surgeons to visualize in small surgical cavities, whether in minimally invasive or open surgeries. Cool light virtually eliminates shadows and glare while minimizing thermal hazards. Available in two tip configurations, Eigr includes attachable pistol grip handle. Unit is suitable for general orthopedic and...

Read More »
CNC Machining

ATW Medical Showcases Engineered Metal Solutions at BIOMEDevice Boston

WARWICK, RI - ATW Companies Inc., a leading provider of custom manufactured metal components and services, will be showcasing its ATW Medical" brand and highlighting its leadership in engineered metal solutions for medical devices at BIOMEDevice Boston, Booth #723, April 25-26, 2012, at the Boston Convention and Exposition Center in Boston, MA. ATW Medical specializes in manufacturing orthopedic...

Read More »
Flexible Microwave Waveguides Available from Servometer
Waveguides

Flexible Microwave Waveguides Available from Servometer

Cedar Grove, NJ Flexible waveguides are available from Servometer, LLC to transmit signals of microwave and radar instrumentation. By using electroforming technology, waveguides are available with the perfect combination of all-metal construction, precise internal dimensions, and flexibility. Electroforming is the process of machining an aluminum or stainless steel mandrel, plating the external...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers