Waterjet Cutters and Cutting Machinery

Waterjet Surface Preparation Machine Strips Paint, Coatings, Dirt, Grease from Steel Decks, Concrete Floors
Waterjet Cutters and Cutting Machinery

Waterjet Surface Preparation Machine Strips Paint, Coatings, Dirt, Grease from Steel Decks, Concrete Floors

ST. MICHAEL, Minn. (September 8, 2009) - Jet Edge's Ultra Deckblaster waterjet surface preparation machine uses ultra-high pressure waterjets to quickly blast away old paint, coatings, grease and dirt from steel decks and concrete floors without using hazardous chemicals. Resembling a lawnmower, the self-propelled Ultra Deckblaster operates at pressures up to 55,000 psi (3,800 bar). Typical...

Read More »
Articulated Cutting Head cuts accurate beveled edges.
Waterjet Cutters and Cutting Machinery

Articulated Cutting Head cuts accurate beveled edges.

Controlled by Intelli-MAX® software, A-Jet(TM) cuts accurate beveled edges at angles determined by machine operator or part program. It features 2 motion axes that allow tilting nozzle over range of 0-60° from vertical position, and component can also be used to produce beveled edges when cutting countersunk holes. Product features fixed focal point design, where XYZ axes need not be...

Read More »
Flow Introduces Mach Series Waterjet Product Lines
Waterjet Cutters and Cutting Machinery

Flow Introduces Mach Series Waterjet Product Lines

Wide range of pressures, models to meet every manufacturing need KENT, Wash., Aug. 25, 2009 - Flow International Corporation (NASDAQ: FLOW), the world's leading developer and manufacturer of ultrahigh-pressure (UHP) waterjet technology, is pleased to introduce its innovative Mach Series line of waterjet cutting machines. Building on more than 35 years of industry leadership, Flow's new Mach...

Read More »
Metal Service Center Jacquet Installs 21 x13 ft Jet Edge Waterjet System
Waterjet Cutters and Cutting Machinery

Metal Service Center Jacquet Installs 21 x13 ft Jet Edge Waterjet System

Metals Processing and Distribution Center Specializes in Stainless Steel, Nickel Alloys, Has Largest Waterjet Tables in North America POTTSTOWN, PA. (August 21, 2009) -- Jet Edge, Inc., is pleased to announce that Jacquet Mid Atlantic of Pottstown, Pa., has installed Jet Edge's new 21'X13' large-format Mid Rail Gantry Waterjet System. The Mid Rail Gantry is the third Jet Edge waterjet system at...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
5-Axis Waterjet Cutting Head has height/crash sensor option.
Waterjet Cutters and Cutting Machinery

5-Axis Waterjet Cutting Head has height/crash sensor option.

Designed for cutting bevels and weld preps in material, Psy-Winder 5-axis abrasive waterjet cutting head features fixed mechanical tool tip, capacity of 12-24 in. vertical travel on Z axis, and cutting angle from 0° vertical to 90° horizontal. User can install up to 9 cutting heads on one cross beam with single X-Classic controller. Speeds can be up to 2,000 in./min depending on...

Read More »
OMAX® Showcases MAXIEM(TM) Abrasive Waterjet Line at SOUTH-TEC
Waterjet Cutters and Cutting Machinery

OMAX® Showcases MAXIEM(TM) Abrasive Waterjet Line at SOUTH-TEC

Kent, Washington, August 4, 2009 - OMAX Corporation will demonstrate the capabilities of the MAXIEM 1515 at SOUTH-TEC 2009. Like all models in the new MAXIEM line of abrasive waterjet machines, the MAXIEM 1515 integrates proven technologies in a cost-efficient package to provide users with an affordable, highly productive metalcutting solution. OMAX will be located in booth 14076 from October 6 -...

Read More »
Waterjet Cutters and Cutting Machinery

Huffman Corporation Awarded Patent for "Method and Apparatus for Removing Coatings from a Substrate using Multiple Sequential Steps"

Huffman Corporation, located in Clover, South Carolina, was awarded a Patent for Method and Apparatus for Removing Coatings from a Substrate using Multiple Sequential Steps" on June 9, 2009. This patent relates to a method and apparatus for removing a coating having an irregular surface configuration, and using the mapping determination in controlling the operation of an abrasive water jet to...

Read More »
Jet Edge Showcasing Cutting-Edge Waterjet Technology at SOUTH-TEC Booth 14072 October 6-8 in Charlotte
Waterjet Cutters and Cutting Machinery

Jet Edge Showcasing Cutting-Edge Waterjet Technology at SOUTH-TEC Booth 14072 October 6-8 in Charlotte

ST. MICHAEL, Minn. (July 21, 2009) V Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems, will showcase its latest waterjet cutting innovations at the SOUTH-TEC Advanced Productivity Exposition, Oct. 6-8 at the Charlotte Convention Center in Charlotte, N.C. Look for Jet Edge in Booth 14072. Visitors to the Jet Edge booth will learn about Jet Edge's innovative precision...

Read More »
Waterjet delivers high-precision machining capabilities.
Waterjet Cutters and Cutting Machinery

Waterjet delivers high-precision machining capabilities.

Along with base design featuring 22 in. I-beam construction, DX Series has stainless steel work tank completely isolated from machine frame, pump control incorporated into NC cabinet, and crash protection for X/Y/Z axis. Mitsubishi 700 Series CNC control, operated via 15 in. waterproof screen, delivers programming abilities for precision machining. Other features include auto grease system for...

Read More »
Jet Edge Exhibiting Latest Waterjet Technology at 2009 American WJTA Conference and Expo
Waterjet Cutters and Cutting Machinery

Jet Edge Exhibiting Latest Waterjet Technology at 2009 American WJTA Conference and Expo

ST. MICHAEL, Minn. (June 29, 2009)- Jet Edge, Inc., will showcase its latest innovations in waterjet cutting and ultra-high pressure surface preparation technology at the WaterJet Technology Association's 2009 American WJTA Conference and Expo, Aug. 18-20, at the Marriott Westchase Hotel in Houston, Texas. Look for Jet Edge in Hall A Booth 209. Visitors to the Jet Edge booth will learn about Jet...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics