
Intelligent Water Jet Pump Uses 30% Less Electricity, 80% Fewer Components
ST. MICHAEL, Minn., USA - Water jet manufacturers Jet Edge and Tecnocut S.p.A. are pleased to introduce the energy-efficient ECUBE 6200 servo-driven intelligent water jet pump. The ECUBE 6200 will make its North American debut at FABTECH, Nov. 2-4 in Atlanta (Jet Edge Booth 3906). Developed through Jet Edge and Tecnocut's research and development partnership, the 90KSI (6200 bar) ECUBE 6200...
Read More »
Jet Edge, Chukar Waterjet Exhibiting Innovative Waterjetting Equipment at International WorkBoat Show, December 1-3
Water Jet Cutting, Surface Preparation Technology Ideal for Marine Environments, Hazardous Areas, Undersea Operations ST. MICHAEL, Minn. - Water jet technology companies Jet Edge and Chukar Waterjet will exhibit the latest innovations in portable ultra-high pressure water jet cutting and surface preparation technology at the International WorkBoat Show, Dec. 1-3 in New Orleans. Look for Jet Edge...
Read More »
Five-Axis Waterjet Cutting Machine cuts through any material.
Available in 5.5 x 6.5, 5.5 x 13, and 6.5 x 13 ft sizes, Milestone 5-axis machine features IKC cutting head that can make inclined cuts and offers 600Â-º rotation, maximum angle of ±60º, and precision from ±0.2 to ±0.5 mm/m. Unit includes ground rack-and-pinion X and Y axes and ball-screw-driven 5.9 in. Z axis, as well as steel covers with labyrinth lip seals that...
Read More »
Jet Edge Showcasing Latest Innovations in Water Jet Technology at FABTECH 2010, November 2-4, Atlanta
Jet Edge Exhibit Includes 5-axis water jet cutting, new energy-efficient servo-driven intelligent water jet pump ST. MICHAEL, Minn. (Sept. 9, 2010) - Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems, will showcase its latest water jet cutting innovations at FABTECH 2010, Nov. 2-4 at the Georgia World Congress Center in Atlanta. Look for Jet Edge in Booth 3906. During...
Read More »
Fastener Technical Resource Guide
This fastener technical resource guide will show you how to specify nuts, points, heads, washers and more.
Read More »
Portable, Abrasive Waterjet Cutter suits hazardous locations.
Spyder Abrasivejet Radius and Circle Cutting System features self-aligning centering pin for setup, motion components made from non-ferrous materials, and cutting head manipulators powered by pneumatic motors. Available in 1-6.5 in. ID/16-48 in. OD and 3-12.5 in. ID/27.5-56 in. OD sizes, portable unit can be set up on side of tanks, small vessels, and large diameter piping. System is powered by...
Read More »
MAXIEM® Line of Machines Marks a Year of Growth
Kent, Washington - In just one short year, the OMAX® Corporation has grown its line of MAXIEM JetCutting Systems to five machine models, with the most recent additions, the MAXIEM 2040 and MAXIEM 0707, to be shown at the company's IMTS booth # N-6228. OMAX first introduced the MAXIEM line in 2009, and the product line continues to flourish and meet customer demands for cost-efficient,...
Read More »
Flow International Features Mach 4 with Dynamic XD at FABTECH
KENT, Wash. -Flow International Corporation will conduct live demonstrations of the Mach 4 system with Dynamic Waterjet® XD at FABTECH held in Atlanta, GA, at the Georgia World Congress Center, November 2-4, 2010 in Booth 2333. The Mach 4 is the flagship of the Mach series and the industry's most advanced waterjet technology. The Mach 4 series combines Flow's HyperJet® pump, rated at...
Read More »
Jet Edge Precision Water Jet Cutting System on Exhibit at FABTECH 2010, November 2-4, Atlanta
ST. MICHAEL, Minn. (August 12, 2010) - Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet systems, will showcase its latest water jet cutting innovations at FABTECH 2010, Nov. 2-4 at the Georgia World Congress Center in Atlanta. Look for Jet Edge in Booth 3906. Jet Edge will exhibit innovative precision waterjet cutting products, including its 90,000 psi (6,200 bar) X-Stream...
Read More »
Water Jet Cutting Machines feature IKC 5-axis cutting head.
Capable of cutting virtually any material, Idro line water jet cutting machines are available in 3 sizes, 1,700 x 2,000, 1,700 x 4,000, and 2,000 x 4,000 mm. IKC's capabilities include 600Â-º rotation, max angle of ±60º, and dynamic precision from ±0.2 to ±0.5 mm/m, depending on tilt of head. With ground rack and pinion X and Y axes and ball-screw-driven 150 mm Z...
Read More »
Waterjet Technology Helps BP Cap Gulf Oil Leak
Jet Edge and Chukar Waterjet Team up to Develop Water Jet System That Operates in Water Depths Exceeding 5,000 Feet ST. MICHAEL, Minn. (July 21, 2010) - Water jet technology companies Jet Edge, Inc. and Chukar Waterjet, Inc. recently played a key role in helping BP stop the oil leak in the Gulf of Mexico. The companies provided ultra-high pressure waterjet equipment and application expertise to...
Read More »
Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission
Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.
Read More »