Water Heaters (HVAC)

Boilers and Heaters have integrated sequencer.
Water Heaters (HVAC)

Boilers and Heaters have integrated sequencer.

With BTU inputs from 1.5-2 million, Power-Fin 1500, 1700, and 2000 models feature internal cascading sequencer for creating lead/lag system in which lead boiler or water heater controls rotating operation and firing rate of up to 7 additional units. They include 2-line, 16-character LCD, 0-10 Vdc BMS input, and 3-pump control capability. With 5:1 turndown modulating performance, systems can fire...

Read More »
Heat Recovery Unit provides free hot water.
Water Heaters (HVAC)

Heat Recovery Unit provides free hot water.

Engineered to minimize water heating equipment load, Enviro-Pak hot water maker and heat recovery unit uses excess refrigeration energy of existing or newly installed air-conditioning or refrigeration systems in 1.5-5 ton range. Unit can be used with R-22 or R410a applications, and can provide increase in SEER for older systems up to 3 SEER points. Offered with white powder coat paint or...

Read More »
Gas Fired Condensing Boiler is IBR-rated.
Water Heaters (HVAC)

Gas Fired Condensing Boiler is IBR-rated.

With full modulation and 3:1 turndown, Futera Fusion(TM) boiler meets changing demands of environmentally sensitive or green building design. Boiler features solid bronze headers, gasket-less heat exchanger, finned copper or cupronickel tubing, and metal-fiber burner. System automatically adjusts energy input to match heating load without over-firing or wasting fuel. Boiler is 29 in. wide and...

Read More »
Water Heaters (HVAC)

Heating Products deliver instant hot water to every faucet.

Capable of saving households up to 15,000 gal of water per year, Autocirc® and UltraCirc® hot water circulation pumps bring hot water instantly to faucets and showers. Autocirc is geared for retrofit applications, while UltraCirc is designed for new construction. Both systems integrate with existing hot water supply line and can be installed by DIYs or plumbers. UltraCirc compact recirculation...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
Water Heater uses plate type heat exchanger.
Water Heaters (HVAC)

Water Heater uses plate type heat exchanger.

Vertically packaged SPH Series water heaters provide solution for producing domestic hot water with hydronic boilers including cast iron, copper tube, water tube, or specialty high efficiency condensing boilers. Completely packaged and ready for use, heater is available in range of storage tank volumes from 60-500 gal with ability to heat up to 2,500,000 BTU/hr of hot water.

Read More »
Infrared Water Heater eliminates fluid contamination.
Water Heaters (HVAC)

Infrared Water Heater eliminates fluid contamination.

Ultrapure Water Heater consists of quartz glass twin-tube IR emitter enclosed by larger quartz glass tube with internal gold coating. Offering heating efficiencies exceeding 95%, halogen-free unit can be fit in-line and achieves temperature rises to 80°K depending on liquid throughput and emitter arrangement. Power rating is 6.3 kW for heated length of 600 mm, but heated lengths up to 2 m are...

Read More »
Gas Heater adds heat to cold water pressure washers.
Water Heaters (HVAC)

Gas Heater adds heat to cold water pressure washers.

Operating on 120 or 240 V single-phase incoming power, HGM Series incorporates electronic ignition with pilot; 24 V control system; and on/off burner switch. Construction includes ½ in. schedule 80 vertical coil assembly, natural gas or LP-gas fired natural draft with aspirating-type burner, and draft diverter. Unit is fork truck accessible and provides inlet and outlet quick connects as well as...

Read More »
Tank Heaters can be installed horizontally or vertically.
Water Heaters (HVAC)

Tank Heaters can be installed horizontally or vertically.

Able to operate with water or steam on tubeside, U-Tube Tank Heaters are offered in 2- and 4-pass designs and can be installed in new or existing hot water tanks. Instantaneous heaters, ranging in size from 4-12 in. dia with lengths to 10 ft, feature cast iron heads, copper tubes and baffles, and steel tube sheets and bolting. Applications including service water, space heating, radiation, and...

Read More »
Water Heaters provide instantaneous hot water.
Water Heaters (HVAC)

Water Heaters provide instantaneous hot water.

Flo-Rite-Temp Heaters utilize feed-forward principle of control, eliminating need for temperature sensing devices. Blending valve mounts directly on heat exchanger. Tube bundle features floating head design, which relieves tube stress and allows tubes to be removed for mechanical cleaning. Tubes are 16 ga Admiralty Brass and shell is carbon steel. Using 2-15 psig steam supply, Flo-Rite-Temp units...

Read More »
Water Heaters offer capacities of 1-25 million btu/hr.
Water Heaters (HVAC)

Water Heaters offer capacities of 1-25 million btu/hr.

Direct-contact, gas-fired Flo-Direct water heaters are all stainless steel units suited for variety of hot-water applications. Offering heat transfer efficiencies of 98% or greater, units are NSF 5 certified for all food grade water and can operate well with poor water quality. Typical applications include laundries, batch food processes, washdown, parts washers, concrete plants, and boiler...

Read More »
5 and 13 Micron Resolve Columns
Sponsored

5 and 13 Micron Resolve Columns

Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.

Read More »

All Topics