Water Heaters (HVAC)

Chiller offers energy-efficient water cooling and heating.
Water Heaters (HVAC)

Chiller offers energy-efficient water cooling and heating.

Utilizing York® air source heat pump and R-410A refrigerant, Model RCS GREEN Reverse Cycle Chiller(TM) (RCC) can heat water to 115°F and cool water to 40°F. System can be sized to heating requirements of home. Available in 2-3 ton and 4-5 ton capacity models, chiller has optional APCHPL16 Aqua Solar Heat Pipe hot water collectors, which feature 16 glass vacuum tubes with...

Read More »
Wall-mounted heating boiler is Energy Star qualified.
Water Heaters (HVAC)

Wall-mounted heating boiler is Energy Star qualified.

KNIGHT wall-mounted fully modulating condensing heating boiler features 5:1 turndown burner and adjusts heat output according to demand. Boiler offers an efficiency rating of at least 93%, and permits intake with venting running up to 40 feet using 2 in. pipe. Also features Smart System operating control with user-friendly interface, outdoor reset with sensor, three pump control, night setback,...

Read More »
Indirect Water Heater shares heat with hydronic boiler.
Water Heaters (HVAC)

Indirect Water Heater shares heat with hydronic boiler.

Energy Saver Indirect Water Heater(TM) accepts heat from external heat source that warms space heating fluid, which then passes through unit's internal heat exchanger. As fluid passes through glass-coated, conductive tube, heat is shared between space heating fluid and domestic water in storage vessel. This results in 2 supplies of hot water from one boiler. Non-CFC foam insulation maximizes heat...

Read More »
Water Heater offers thermal efficiencies up to 98%.
Water Heaters (HVAC)

Water Heater offers thermal efficiencies up to 98%.

Available in 5 commercial models with inputs from 150,000-500,000 BTU/hr, ARMOR Water Heater is designed to be installed with separate storage tank for protection against harmful effects of lime scale buildup. Along with stainless steel heat exchanger, product is equipped with fully modulating 5:1 turndown burner and SMART SYSTEM(TM) control with built-in cascading sequencer. Water heater can be...

Read More »
Boilers and Water Heaters operate on natural gas or propane.
Water Heaters (HVAC)

Boilers and Water Heaters operate on natural gas or propane.

KC1000 high-efficiency boilers and water heaters support sealed combustion in all climates and can be configured to support dual fuel applications. Using natural gas, 78 x 22 x 57 in. units maintain low NOx emissions over entire 11:1 operating range, and can be used in single unit or modular arrangements. One million BTU/hr condensing units feature control software that integrates with BAS/EMS...

Read More »
Water Heaters (HVAC)

Water Heaters work with any hydronic heat source.

Available in 4 models with 40, 55, 79, and 119 gal capacities, Techtanium Indirect Water Heaters are supplied with 2 magnesium anti-corrosion anodes, exterior steel jacket with powder coat paint, polyurethane foam insulation, and carbon steel tank with oven-glazed titanium glass liner. Units save energy by providing hot water with minimal heat loss.

Read More »
Water Heaters (HVAC)

On-Demand Water Heaters promote concrete production.

Designed for ready-mix concrete plants, FIRESTORM(TM) raises temperature of water used to make concrete up to 180°F at flow rates from 20-300 gpm. It uses fully modulating, fired burner and exhibits thermal efficiency up to 99%. Controls are automated using PLC technology, and parts subject to corrosion are made from stainless steel. Offered in various sizes, heaters enable ready-mix plants...

Read More »
Boilers and Heaters have integrated sequencer.
Water Heaters (HVAC)

Boilers and Heaters have integrated sequencer.

With BTU inputs from 1.5-2 million, Power-Fin 1500, 1700, and 2000 models feature internal cascading sequencer for creating lead/lag system in which lead boiler or water heater controls rotating operation and firing rate of up to 7 additional units. They include 2-line, 16-character LCD, 0-10 Vdc BMS input, and 3-pump control capability. With 5:1 turndown modulating performance, systems can fire...

Read More »
Heat Recovery Unit provides free hot water.
Water Heaters (HVAC)

Heat Recovery Unit provides free hot water.

Engineered to minimize water heating equipment load, Enviro-Pak hot water maker and heat recovery unit uses excess refrigeration energy of existing or newly installed air-conditioning or refrigeration systems in 1.5-5 ton range. Unit can be used with R-22 or R410a applications, and can provide increase in SEER for older systems up to 3 SEER points. Offered with white powder coat paint or...

Read More »
Gas Fired Condensing Boiler is IBR-rated.
Water Heaters (HVAC)

Gas Fired Condensing Boiler is IBR-rated.

With full modulation and 3:1 turndown, Futera Fusion(TM) boiler meets changing demands of environmentally sensitive or green building design. Boiler features solid bronze headers, gasket-less heat exchanger, finned copper or cupronickel tubing, and metal-fiber burner. System automatically adjusts energy input to match heating load without over-firing or wasting fuel. Boiler is 29 in. wide and...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics