DAS Absorber and Antenna Holder mitigate PIM.
To optimize installation, PIMinatorÃ-® Distributed Antenna Systems are available with DASACHOLDER above-ceiling antenna holder. Plastic holder does not interfere with aesthetics of building and does not induce passive intermodulation. Attaching to plastic holder or surrounding structures, DASACABSORBER helps mitigate effects of PIM sources by absorbing reflections on cellular radio...
Read More »
Brady SPC Offers Safer Absorbent Alternative to Granulars Containing Silica
Polypropylene-based absorbent pads and rolls effectively absorb spills without using silica MILWAUKEE, Wis. — Brady (NYSE:BRC), a global leader in industrial and safety printing systems and solutions, today announces its Brady SPC line of absorbent and spill control products is a safer, more effective alternative to commonly-used granular products that contain silica. With OSHA recently...
Read More »
Pulsation Dampener supports AODD pump applications.
Constructed of 316L stainless steel with PTFE diaphragm, AODDampener is specifically designed to eliminate pulsations in air operated double diaphragm pump applications. Unit employs automatic air control that utilizes existing compressed air source in AODD pump system for charging. As fluid line pressure increases, air charge in dampener is increased to match it. When line pressure drops,...
Read More »SpillFix Wins Occupational Health & Safety New Product of the Year Award
Will exhibit at the National Safety Council Congress Expo in Atlanta September 26 – October 2 at booth #3989 CARY, N.C. – American Green Ventures, (US) Inc. announced today that its revolutionary SpillFix-® Industrial Organic Absorbent has been awarded New Product of the Year by Occupational Health Safety magazine in the Hazmat Safety category.- Winners will be recognized at this year’s...
Read More »
A Guide to Quality Control of the SMT Process
The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.
Read More »ADEKA Group to Join Interplastica 2014 Trade Fair
TOKYO - ADEKA Palmarole SAS, the French subsidiary of ADEKA Corporation, will join the International Trade Fair Plastics and Rubber (Interplastica 2014), a plastics and rubber industry fair to be held at the Expocentre in Moscow, Russia. The fair takes place on Jan. 28-31, 2014, and ADEKA will exhibit its products at Hall 8.1, Booth 8.1.B35. Interplastica, which will be held for the 17th time, is...
Read More »Multisorb to Provide Desiccant Solutions at SPIE Photonics West
Buffalo, New YorkÃ- – Multisorb Technologies will be among the more than 1200 exhibitors at the Moscone Center in San Francisco, California for the SPIE Photonics West event - the premier North American event for showcasing the latest products, tools, applications, and solutions for the laser and photonics community. Multisorb will be exhibiting in the North Hall D, booth 5216, from...
Read More »SATO Increases Production Capability for ECONANO-® - The World's First CO2 Reducing Label
The World's First CO2 Reducing Label Tokyo, Japan – SATO, a leader in barcode printing, labeling, and EPC/RFID solutions announced today plans to increase production of its unique ECONANOÃ-® labels – the world's first label series able to reduce CO2 emissions released at the point of incineration. ACTiiEVe Corporation, responsible for the manufacturing of base materials used in...
Read More »United Conveyor Corporation Leads the Industry in Dry Sorbent Injection Mill Orders
Waukegan, Ill. – United Conveyor Corporation (UCC) was recently awarded contracts for 11 Dry Sorbent Injection (DSI) systems which include a total of 41 VIPER™ Mills.Ã- Dry sorbent injection is a leading technology for the removal of SO2, HCl and SO3 acid gas emissions.Ã- UCC’s industry leading technology, including the new VIPER Mill, provides utilities with an efficient and...
Read More »PolySorb-® Prevents Lens Fogging on Optical Equipment
Multisorb to exhibit sorbent solutions at SPIE Defense, Security and Sensing Buffalo, New York - Multisorb Technologies announced today they will be exhibiting at SPIE's 2012 Defense, Security and Sensing in Baltimore, Maryland, on April 23-27, 2012. The event is the industry's leading conference for scientists and engineers from industry, military, government agencies, and academia throughout...
Read More »BASF Showcases Broad Product Offering for Engineered Fabrics and Nonwovens at IDEA 2010
Company to highlight its superabsorbent polymers, as well as components used to make or enhance engineered fabrics and their end uses FLORHAM PARK, NJ- BASF will feature its broad range of products and technologies for the nonwovens market in its booth number 1672, Hall B, at IDEA 2010, the International Engineered Fabrics Conference. The triennial event draws decision makers in the nonwovens...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
