New Bedrock® OSA Remote Comes with Open Connectivity Feature
Controls and Controllers

New Bedrock® OSA Remote Comes with Open Connectivity Feature

Bedrock® Open Secure Automation (OSA®) Remote is designed for monitoring and control applications. Unit’s channel can be programmed for analog, HART 7, BSAP, RS-232/485/422, Ethernet IP, ModBus TCP and DNP3. The remote comes with an array of cyber secure and multi-core ARM processors, 512Mb RAM, 8Gb or 32Gb Flash and MRAM and measures 137 mm x 226 mm x 59 mm in thickness. Unit offers SCADA...

Read More »
New Bedrock-® OSA Remote Comes with Open Connectivity Feature
Controls and Controllers

New Bedrock-® OSA Remote Comes with Open Connectivity Feature

Bedrock® Open Secure Automation (OSA®) Remote is designed for monitoring and control applications. Unit’s channel can be programmed for analog, HART 7, BSAP, RS-232/485/422, Ethernet IP, ModBus TCP and DNP3. The remote comes with an array of cyber secure and multi-core ARM processors, 512Mb RAM, 8Gb or 32Gb Flash and MRAM and measures 137 mm x 226 mm x 59 mm in thickness. Unit offers SCADA...

Read More »
Little Patuxent Water Reclamation Facility Upgrades System with AirPrex® for Sludge Optimization and P-Recovery
Wastewater Treatment Equipment

Little Patuxent Water Reclamation Facility Upgrades System with AirPrex® for Sludge Optimization and P-Recovery

CNP – Technology Water and Biosolids, a division of Centrisys Corporation in Kenosha, Wisconsin, recently supplied the Howard County Department of Public Works with the patented CNP AirPrex process. AirPrex, scheduled to be operational during the Q3 2018, will improve the current biosolids processing facility by sequestering phosphorous and preventing the formation of phosphorous scale known as...

Read More »
Little Patuxent Water Reclamation Facility Upgrades System with AirPrex-® for Sludge Optimization and P-Recovery
Wastewater Treatment Equipment

Little Patuxent Water Reclamation Facility Upgrades System with AirPrex-® for Sludge Optimization and P-Recovery

CNP – Technology Water and Biosolids, a division of Centrisys Corporation in Kenosha, Wisconsin, recently supplied the Howard County Department of Public Works with the patented CNP AirPrex process. AirPrex, scheduled to be operational during the Q3 2018, will improve the current biosolids processing facility by sequestering phosphorous and preventing the formation of phosphorous scale known as...

Read More »
Solid State Shredders are compliant to NAID and DoD standards.
Shredders

Solid State Shredders are compliant to NAID and DoD standards.

Shredders are offered in 0315, 0305 and 0304 models in multiple configurations for destroying rotational HDDs only, SSD only and combo version for both HDDs and SSDs. Model 0315 shreds up to 90 enterprise rotational HDDS and up to 120 rotational SSDs per hour whereas Models 0305 and 0304 can shred up to 800 HDDs/1,200 SSDs and 1,400 HDDs/2,000 SSDs per hour, respectively. These units provide...

Read More »
Solid State Shredders are compliant to NAID and DoD standards.
Shredders

Solid State Shredders are compliant to NAID and DoD standards.

Shredders are offered in 0315, 0305 and 0304 models in multiple configurations for destroying rotational HDDs only, SSD only and combo version for both HDDs and SSDs. Model 0315 shreds up to 90 enterprise rotational HDDS and up to 120 rotational SSDs per hour whereas Models 0305 and 0304 can shred up to 800 HDDs/1,200 SSDs and 1,400 HDDs/2,000 SSDs per hour, respectively. These units provide...

Read More »
FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.
Strippers

FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.

FCS18 RIP-R-Stripper is equipped with ¾ HP electric blade motor and 1/3 HP electric drive motors. Unit features heavy-duty unitized, welded steel-plate frame and comes with 50 ft extension cord, 2 x 10 in. straight blade with 6 in. cutting edge and 2 x 11 in. straight blade. Stripper’s exciter plate mounted to motor driveshaft transfers maximum power to material removed through orbital action....

Read More »
FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.
Strippers

FCS18 RIP-R-Stripper offers removal rate up to 720 sq-ft of material per hour.

FCS18 RIP-R-Stripper is equipped with ¾ HP electric blade motor and 1/3 HP electric drive motors. Unit features heavy-duty unitized, welded steel-plate frame and comes with 50 ft extension cord, 2 x 10 in. straight blade with 6 in. cutting edge and 2 x 11 in. straight blade. Stripper’s exciter plate mounted to motor driveshaft transfers maximum power to material removed through orbital action....

Read More »
Stand-Alone Dust Collector is equipped with dual filter cartridges.
Dust / Fume / Mist Collectors

Stand-Alone Dust Collector is equipped with dual filter cartridges.

Flexicon’s Stand-Alone Dust Collector features NEMA 4X water-resistant controls and stainless steel housing. Unit comes with 15 mm diameter side inlet port, 1.5 kW fan motor and 70 L collection hopper with flanged slide gate valve. Collector’s automatic reverse-pulse filter cleaning system releases short blasts of compressed plant air inside the filters that allows dust to fall into the...

Read More »
Stand-Alone Dust Collector is equipped with dual filter cartridges.
Dust / Fume / Mist Collectors

Stand-Alone Dust Collector is equipped with dual filter cartridges.

Flexicon’s Stand-Alone Dust Collector features NEMA 4X water-resistant controls and stainless steel housing. Unit comes with 15 mm diameter side inlet port, 1.5 kW fan motor and 70 L collection hopper with flanged slide gate valve. Collector’s automatic reverse-pulse filter cleaning system releases short blasts of compressed plant air inside the filters that allows dust to fall into the...

Read More »

All Topics