HMI Hardware comes with control software.
Computers

HMI Hardware comes with control software.

GLC2300T and GLC2300L Graphic Logic Controllers have graphic display, touch panel, distributed I/O, Ethernet interface, 2 serial ports, and CompactFlash card socket for data handling. GP-PRO/PB III C-Package01 software combines HMI editing, ladder logic programming, and ability to get data over Ethernet network and view screens over Web. Applications are downloaded to target GLC unit via serial...

Read More »
Receptacles are low maintenance.
Trash Cans and Waste Receptacles

Receptacles are low maintenance.

Steel Designer Line(TM) is constructed from No. 304 stainless steel, and is available with satin stainless, satin brass, and mirror brass finishes. Eight models range in capacity from 5 to 15 gallons. All models comply with OSHA standards. Most models are UL Listed/FM Approved as fire-safe and self-extinguishing, and UL Classified as fire-safe.

Read More »
Turning and Milling Inserts are PVD coated.
Inserts

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Read More »
Dust Collector meets workplace air specs.
Dust / Fume / Mist Collectors

Dust Collector meets workplace air specs.

Gold Series(R) line of cartridge dust and fume collectors use Poly-Tech(TM) silicone-impregnated polyester/cellulose media. Collectors meet or exceed 5 mg/cu m emissions threshold on non-hazardous dusts required to recirculate air back into workplace. They are suitable for removal of all types of fine, dry dusts. Optional 99.99% efficient version removes 0.5 micron and larger particles for more...

Read More »
Dust Collector suits low headroom installations.
Dust / Fume / Mist Collectors

Dust Collector suits low headroom installations.

Side Winder Model DKCD 72030 is a 30 HP, 7,500 CFM dust collector featuring side mounted fan and flat envelope-shaped filters. It is only 122 in. tall, and typically used for collection of wood dust from maintenance shops and removal of powders caused by mixing or blending. Dust is collected in four 55-gal drums. Unit can be installed outdoors or indoors if local fire codes permit.

Read More »
Spill Kits are easy to locate.
Spill Kits

Spill Kits are easy to locate.

PIG(R) High Visibility MRO Spill Kits come in lime-green containers, making them easy to see, even in low light. Constructed of 100% polyethylene, they contain variety of socks, mats and pillows to absorb up to 61 gal of non-aggressive liquids. Kits are available in 95 gal and 65 gal sizes, and include yellow caution disposal bags, instructional manual, and emergency guidebook. Tamper-proof seals...

Read More »
Dust Collector allows continuous production.
Dust / Fume / Mist Collectors

Dust Collector allows continuous production.

Whirl/Wet Dust Collection System has radiused welds so that material cannot accumulate in unit. Its 100% polypropylene construction makes it highly resistant to mechanical damage. System is available in capacities from 500 to 50,000 cfm, and suitable for applications that generate dusts larger than 2 microns. It is self-cleaning and functions without pumps or internal moving parts. PLC monitors...

Read More »
Reverse Expansion Insert presses into plastic hole.
Inserts

Reverse Expansion Insert presses into plastic hole.

Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by...

Read More »
Plug converts sensors into controllers.
Controls and Controllers

Plug converts sensors into controllers.

SmartPlug adds control functions such as timing, counting, inverting and speed monitoring to sensors. Approximately 2 in. long, it connects between cable and sensor. Programming is done via teach input device available separately. Inverter version converts PNP input signal to NPN or vice versa, or NO to NC. Timer is programmable from 1 ms to 65 sec. Counter is programmable to count pulses or...

Read More »
Spill Cleanup Kit is available with refill rolls.
Absorbents

Spill Cleanup Kit is available with refill rolls.

Spill Kaddie mobile emergency kit picks up 22 gallons. It contains 1 roll of (200) 7 1/2 x 9 in. pads, (5) 3 in. x 4 ft socs, (8) 9 x 9 in. Pillows, 1 pair of goggles, 1 pair of Nitrile gloves, (5) 6 mil plastic bags, and 1 Emergency Response Handbook. Measuring 18 x 17 x 39 in., Spill Kaddie may be stored in space-constricted places, and offers black wheels for maneuverability. MRO-15 DPS 15 in....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers