Vibration Damping Mounts

Vibration Isolation System is frame mountable.
Vibration Damping Mounts

Vibration Isolation System is frame mountable.

Hard-mount active vibration cancellation system, STACIS® FM is designed to control building floor vibrations in semiconductor manufacturing facilities. Unit features extended stroke piezoelectric actuators and hard-mount suspension with no soft air springs. It is available in either 3 or 6 degrees of freedom and starts to isolate below 1 Hz. Stacis technology allows fast settling of...

Read More »
Vibration Isolators provide optimal damping performance.
Vibration Damping Mounts

Vibration Isolators provide optimal damping performance.

Designed for light to medium loads, Series V10Z62MGT Silicone Gel Tape comes in 1,000 mm lengths and thicknesses of 1, 2, and 3 mm. Each thickness is available in 10 and 20 mm widths. Series V20Z62MGC Silicone Chip Isolators come in thicknesses from 3-10 mm and 3 sheet sizes of 10 x 10, 15 x 15, and 20 x 20 mm. Operating from -40 to 212°F, metric isolators offer chemical and weather...

Read More »
Spring Suspension Mounts target HVAC applications.
Vibration Damping Mounts

Spring Suspension Mounts target HVAC applications.

Designed to isolate suspended products weighing 22-705 lb, V11Z71MKSH Series includes 11 mounts constructed with zinc-plated steel housing. Spring is painted hard drawn steel, and lower plate is neoprene. By having rubber on both ends of coil spring, units can minimize vibrations for wide range of frequencies. Mounts are best suited for hanging fans, distribution pipes, and ducts from ceilings.

Read More »
Vibration Damping Mounts

AirLoc Wedgmounts® with BiLoc® Pads Provide Leveling and Isolation for HORIBA

HORIBA Automotive Test Systems is a leading supplier in the field of engine, driveline, brake, wind tunnel and emissions test systems. When Horiba's customer (a major automotive manufacturer) needed 12 test stands for the purpose of testing a new hybrid electric motor, Chris Vogt, Engineering Manager at HORIBA in Troy, Michigan, turned to AirLoc to provide isolated leveling mounts. The AirLoc...

Read More »
Vibration Cancellation Floor stabilizes SEMs.
Vibration Damping Mounts

Vibration Cancellation Floor stabilizes SEMs.

Designed for use with scanning electron microscopes (SEMs), STACIS® FP active hard-mount vibration cancellation floor platform features extended stroke piezoelectric actuators and damped, powder-coated steel plates that sandwich 4 isolators and digital controller. Measuring 7 in. tall, it weighs less than 400 lb and can support up to 2,500 lb. or more with no soft air suspension. With...

Read More »
Pneumatic Vibration Isolators feature 2,000 lb capacity.
Vibration Damping Mounts

Pneumatic Vibration Isolators feature 2,000 lb capacity.

Featuring self-centering pendulum design, S-2000 Stabilizer Series vibration isolators include laminar-flow damping system and precision auto-leveling valves as well as optimized leveling indicators and recessed lifting channels. They deliver 1 Hz vertical resonant frequency and vertical isolation efficiency of 98% at 10 Hz. Horizontal isolation begins at 2.5 Hz and reaches 95% efficiency at 10...

Read More »
Machinery Mount can adapt to wide variety of equipment.
Vibration Damping Mounts

Machinery Mount can adapt to wide variety of equipment.

Designed for mounting Laser Microgage Receiver on roll or shaft surface for checking height, profile, or parallelism to other nearby shafts and rolls, Roll Mount has 2 parallel mounting bars that are fully adjustable inwards or outwards to accommodate shafts or roll surfaces of different diameters. Supported on stainless steel post, receiver can be adjusted up or down for placement on many...

Read More »
Custom Linear Slide Kit Motor Mounts Now Available with Industry-First 5-Day Production Guarantee from GAM
Vibration Damping Mounts

Custom Linear Slide Kit Motor Mounts Now Available with Industry-First 5-Day Production Guarantee from GAM

Mount Prospect, IL, USA - 11 March 2009 - Long lead times are a thing of the past with customized LSK mounting solutions from GAM now available in only 5 days. When mounting a motor or gearbox to a linear slide, belt or ball screw actuator, a customized Linear Slide Kit (LSK) from GAM can be your hassle-free, simple solution. Compatible with any linear slide, belt or ball screw actuator and any...

Read More »
Mounting Brackets accommodate replacement ladle cups.
Vibration Damping Mounts

Mounting Brackets accommodate replacement ladle cups.

Featuring universal design that facilitates mounting and tightening, Hanger Brackets are suited for use on Buhler Die Casting machines. Without requiring ladle or hanging bracket modifications, reusable bolt-on design also facilitates cup replacement on left-/right-side applications. They accommodate all Replacement Versa Ladle Cups, in multiple sizes, with capacities from .44-33.70 lb. Brackets...

Read More »
Workstation minimizes vibration for sensitive equipment.
Vibration Damping Mounts

Workstation minimizes vibration for sensitive equipment.

Compact, ergonomic 2800 Series LLHP Vibration-Isolation Workstation meets vibration isolation requirements of equipment in 100 lb range, 200 lb max. It provides automatic leveling and 1.1 Hz frequencies along horizontal axis with isolation efficiency of 97% at 10 Hz and above, and 1.4 Hz along vertical axis, with 96% efficiency. Trifilar pendulum mounts and Active-Air suspension optimize...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics