Vibration and Mechanical Dampers

AirLoc Die Inverting Tiles Provide Cost Effective Protection for Tooling & Floors!
Vibration and Mechanical Dampers

AirLoc Die Inverting Tiles Provide Cost Effective Protection for Tooling & Floors!

Die inverting tiles are frequently used to protect tooling and floors where large, heavy stamping or forming dies are inverted for maintenance (see picture below). They provide cushioning for the die shoes and prevent damage to concrete floors during the inverting process. AirLoc designed die inverting tile systems are available, as shown below, using high stiffness (95 durometer), fiber...

Read More »
Air Springs isolate vibration for low-frequency machines.
Vibration and Mechanical Dampers

Air Springs isolate vibration for low-frequency machines.

Metric isolators of V11Z48MPSB... Series are maintenance-free air spring vibration mounts that use elasticity of air as isolator, which acts as soft spring. Products have no moving parts and can handle range of loads by changing inner air pressure. They can also be used as actuators in tensioning devices. While bellows are made of synthetic rubber that incorporates reinforced cord and wire,...

Read More »
Mid-West Instrument has CRN 12564.5C for all Canadian Provinces
Vibration and Mechanical Dampers

Mid-West Instrument has CRN 12564.5C for all Canadian Provinces

Where ever a CRN (Canadian Registration Number) is required for equipment produced in Canada or shipped into Canada, Mid-West Instrument has products to meet this requirement. A wide variety of models and materials are covered by a CRN for all of Canada. Contact our inside Sales Coordinators to assist you in selecting the most cost effective model and material for your specific CRN requirements....

Read More »
Vibration and Mechanical Dampers

Slip Joints/Weld-On Hinges suit removable door applications.

Allowing instant access to cabinet interior, Slip Joints comes in various sizes from 1 Â-½ to 3 in. long and 1 7/16 to 3 in. open width, with either blank leaves or standard hole patterns. Offering alternative to continuous, butt, or slip hinges, Weld-On Hinges have no leaves or fasteners to remove. They come in 12 sizes with options for fixed pin, fixed pin with grease fitting, or removable...

Read More »
Vibration and Mechanical Dampers

Reliable Light Weight Gas Springs

H.A. Guden, providing hinge and hardware and gas spring expertise for over 4 generations, at Guden we regularly incorporate new technology to advance on our hinge hardware and controlled motion gas springs offerings. Guden has an expanded line of continuous, butt welded, slip and specialty hinges available in aluminum and stainless steel. Guden has now added heavy duty hinges available from stock...

Read More »
Heavy-duty Gas Springs From Guden
Vibration and Mechanical Dampers

Heavy-duty Gas Springs From Guden

H.A. Guden, providing hinge and hardware and gas spring expertise for over 4 generations, at Guden we regularly incorporate new technology to advance on our hinge hardware and controlled motion gas springs offerings. Guden has an expanded line of continuous, butt welded, slip and specialty hinges available in aluminum and stainless steel. Guden is a complete source for all heavy duty hinges...

Read More »
Vibration and Mechanical Dampers

AirLoc Wedgmounts® with Damping Pads Put the Skids on John Deere Genset Vibration

Whitestone Power and Communication, a small rural energy provider, recently installed new John Deere prime movers on AirLoc 204.3 VRC Wedgmounts® in conjunction with AirLoc 727 damping pads. Hasz Consulting Co., experts with vibration analysis and testing, worked with Whitestone on the installation. Steve Selvaggio of Hasz says that the purpose of the mounting system was to minimize high...

Read More »
Vibration and Mechanical Dampers

AirLoc Damping Pads Provide A Major Improvement In Reducing Transmitted Vibration From AIRAM Presses!

Airam Press Co. LTD. was founded in 1965 to produce the Airam line of pneumatic presses with a unique air tube mechanism for the stamping, blanking, roll forming and die cutting industries. John Bornhorst, PE and V.P. of Engineering at AIRAM says that the main complaint from their customers was the problem of the press energy being transmitted to the floor with vibration being felt through the...

Read More »
Vibration and Mechanical Dampers

Smoothen out Step Motor Performance with Dampers

Santa Clara, CA - August 2008 - Lin Engineering, the Step Motor Specialists, are pleased to introduce their new line of dampers. These dampers are durable, long lasting, and can easily be mounted onto standard NEMA 23 step motors. As motors step, inertia makes the rotor oscillate about its new position. This natural back and forth movement might sometimes contribute to the erratic motion of...

Read More »
Vibration and Mechanical Dampers

Emerson's PowerVUE(TM) Fan Damper Actuators to Improve Control at Coal-Fired Plant

Rosemount Analytical actuators provide tighter control of the air through the furnace which is important in circulating fluidized bed combustion. SOLON, OHIO (July 2, 2008) - Emerson Process Management, has been awarded a contract to provide ten Rosemount Analytical PowerVUE(TM) Fan/Damper Actuators to control fans for a new coal-fired power plant being constructed in Louisiana. "The end customer...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers