Vessels

Diana Shipping Inc. Announces Delivery of the Kamsarmax Dry Bulk Carrier m/v Myrsini

ATHENS, Greece - Diana Shipping Inc. (NYSE:DSX), (the Company"), a global shipping company specializing in the ownership and operation of dry bulk vessels, today announced that, through a separate wholly-owned subsidiary, it took delivery of the m/v "Myrsini" (formerly "Stefania Lembo"), a 2010 built Kamsarmax dry bulk vessel of 82,117 dwt. The acquisition of this vessel was originally announced...

Read More »
ASME Pressure Vessels from Ross Engineering
Pressure Vessels

ASME Pressure Vessels from Ross Engineering

Savannah, GA — Ross Engineering is a custom manufacturer of ASME pressure vessels as well as storage tanks, stirred reactors, sanitary vessels and columns. With decades of experience in design and fabrication, the company has grown to be one of the best-equipped and most competitive fabricators in North America with the capability to build vessel capacities as large as 100,000 gallons. A...

Read More »
Sanitary Mixing and Holding Vessels
Vessels

Sanitary Mixing and Holding Vessels

Hauppauge, NY – Ross manufactures stainless steel mixing and holding vessels for use in any sanitary application. With over 170 years of experience in designing and fabricating process equipment, Ross is fully equipped to accept a wide range of customization projects, from simple jacketed tanks to very complex, large or high volume requirements. AÂ- 50-L vessel has 150-grit electropolished...

Read More »
Vacuum Vessel System - Spin Vacuum Chamber Components
Pressure Vessels

Vacuum Vessel System - Spin Vacuum Chamber Components

BEPeterson has recently completed components used in a Vacuum Vessel System.Â-  This is a spin vacuum chamber used to test parts at high speeds in a vacuum. The top lid needs to seal with the spin chamber assembly and the top lid is attached to the lift arm and rides up and down on the lift column.  The parts supplied by BEPeterson consisted of: 1) Vacuum Chamber  2) Chamber...

Read More »
ASME Pressure Vessel - Test Vessel
Pressure Vessels

ASME Pressure Vessel - Test Vessel

BEPeterson has recently completed an ASME Pressure Vessel to be used as a Test Vessel for navel underwater development applications.Â-  The pressure vessel is 50 ID x 59.25" T/T fabricated in carbon steel.  It was designed to 150 psi @ -20/482 degrees.  The pressure vessel has six 10" nozzles and twenty four 1" NPT fittings.  The pressure vessel is mounted in a...

Read More »
Fabricated Vessels from Newly Improved Ross Engineering
Pressure Vessels

Fabricated Vessels from Newly Improved Ross Engineering

Savannah, GA – Ross Engineering Inc., a custom fabricator of storage tanks, pressure vessels and reactors, has acquired new machining equipment and upgraded its facility to better serve customers. It can now take fabrication projects of virtually any size or complexity with greater efficiency and faster deliveries than ever before. For over 30 years, Ross Engineering has been building...

Read More »
Pressure Vessel - Holding Tank - Manufactured by BEPeterson
Pressure Vessels

Pressure Vessel - Holding Tank - Manufactured by BEPeterson

BEPeterson has shipped a 48 OD x 72" 304 L Stainless Steel Pressure Vessel.Â-  This is a horizontal holding tank designed for atmospheric pressure @ 150 degrees.  The vessel was welding to carbon steel cradle painted with red oxide primer. BEPeterson fabricates Pressure vessels, both ASME code and non-code pressure vessels and tanks.

Read More »
ASME Pressure Vessel - Exhaust Condensate Tank Fabricated by BEPeterson
Pressure Vessels

ASME Pressure Vessel - Exhaust Condensate Tank Fabricated by BEPeterson

BEPeterson has recently completed an ASME Pressure Vessel to be used as an Exhaust Condensate Tank.Â-  The pressure vessel is 36 OD x 90" OAL fabricated in carbon steel.  It was designed to 15 psi @ 176 degrees.  The pressure vessel has one 24" manway and 8 additional nozzles.  The tank will have both exterior and interior linings added per the customers requirements.

Read More »
Miscellaneous Controls

Air Products to Feature Gas Technologies and Equipment for Foundries at CastExpo 2013

Company's Technology Solutions Can Help Improve Efficiency, Reduce Operating Costs LEHIGH VALLEY, Pa. - Air Products (NYSE: APD), a global industrial gas and technology leader, will feature a range of gas technologies and equipment that can help foundry operators improve efficiency and reduce costs throughout their operations at CastExpo 2013 in St. Louis, Mo., from April 6-9. CastExpo attendees...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers