Vents

New Breather Vent Kit with Optional 60 mm Axial Fan Mounting Holes
Vents

New Breather Vent Kit with Optional 60 mm Axial Fan Mounting Holes

Stahlin® 60mm breather vent installs with just a turn of the wrist and provides indoor and outdoor protection against rain, sleet, snow, dirt and other foreign objects. Helps to maintain component temperatures inside the enclosure within certain design limits. Can be installed on polycarbonate, fiberglass, stainless steel, carbon steel and aluminum enclosures.

Read More »
Amphenol Provides Wind Energy Market with Higher Reliability through Broad Line of Rugged Interconnects
Electrical Connectors

Amphenol Provides Wind Energy Market with Higher Reliability through Broad Line of Rugged Interconnects

Amphenol Industrial Products Group, a global leader in interconnect systems, now offers an array of high quality, reliable connectors for use in the wind power industry. From power connectors and signal connectors, backplane connectors, rugged data cables and switches to complete cable assemblies, fiber optic connectors and assemblies, Amphenol has a connector for every wind power application....

Read More »
Stahlin Enclosures Breather and Drain Vents Meet Requirements for UL Type 4X Enclosure Integrity
Vents

Stahlin Enclosures Breather and Drain Vents Meet Requirements for UL Type 4X Enclosure Integrity

Enclosure specifiers looking for breather and drain vents that are easy to install and meet requirements for UL Type 4X enclosure integrity can rely on Stahlin Non-Metallic Enclosures to supply their needs. Both the breather and drain vents can be used with any enclosure material type such as fiberglass, stainless steel, carbon steel, and polycarbonate. Stahlin's non-metallic Breather Vent...

Read More »
Sanitary Vent operates as breather valve.
Vents

Sanitary Vent operates as breather valve.

Designed to be used with VCI Model 1088 sanitary blanketing valve, Model 1100 operates at multiple set points as breather valve to avoid vacuum or over pressurization inside tank or piping system. Pressure set points range from 0.43–3.42 psi, while vacuum ranges from 0.069–0.385 psi, depending on size of unit. Offered in 2, 3, 4, and 6 in. sizes, vent comes in choice of 316 or 304 stainless...

Read More »
Process Scrubbers

Packaged Gas Scrubber removes >99% rail car vent emissions.

Able to handle single as well as multiple sources with large variations in venting rates with equal efficacy, ScrubPac™ VentClean™ System can remove over 99% of storage tank and rail car vent emissions caused by breathing and filling operations. Packaged scrubber system usesÂ- triple action scrubbing technology and comes in 4 sizes to handle gas capacities from 0–1,500...

Read More »
Breather Strainers equalize pressure in enclosures.
Air Filters

Breather Strainers equalize pressure in enclosures.

Available in metric sizes with stainless steel mesh of 100 or 500 Â-µm, GN 7403 Aluminum Breather Strainers are mounted into wall of enclosures, ensuring pressure equilibrium between inside of enclosure and outside. Outside diameter of enclosure with recessed hexagon matches bolt mounting holes for DIN 3852 threaded pipe connectors. Any dirt and dust particles carried by particular medium...

Read More »
Vents

Rooftop Intake Vent has efficient, contractor-friendly design.

Promoting energy efficiency while also helping to prevent roof system rot and mildew growth, Cobra® IntakePro™ rolls out and fastens with included 1 ¾ in. coil nails. Product can also improve attic ventilation airflow by up to 20% when installed with existing soffit/undereave vents in properly balanced ventilation system, and there is no need for alterations at soffit. Designed...

Read More »
Dryer Vents implement magnetically aligning design.
Vents

Dryer Vents implement magnetically aligning design.

Available for new and existing construction, low-profile dryer venting can be used in area behind most dryers and promotes safety and energy efficiency while reducing vent path bulk. There are 3 magnetically aligning dryer vent models to accommodate various needs: MV-180 self-aligning dryer vent for straight vent path, MV-90 self-aligning dryer vent for 90° vent path, and MV-Flex for any...

Read More »
Dryer Vents boost efficiency and safety.
Vents

Dryer Vents boost efficiency and safety.

Available in 3 magnetically aligning models, Dryer Vents resist crushing and obstruction, allowing dryer to operate at optimum efficiency. Self-aligning Models MV-180 and MV-90 are designed for straight vent path and 90° vent path, respectively, while MV-Flex is designed to accommodate any direction venting. All are available for new and existing construction.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers