Ventilators

Energy Recovery Ventilator features integral heat pump.
Ventilators

Energy Recovery Ventilator features integral heat pump.

Offering performance from 1,000-10,000 cfm, Model ERCH-HP provides 4-30 tons of mechanical cooling capacity. Integral water source heat pump module is capable of conditioning outdoor air throughout year as it includes both heating and cooling cycles. Licensed to bear AMCA Seal for Air Performance, Model ERCH-HP can serve as dedicated outdoor air unit that provides ventilation for water source and...

Read More »
UDVL Upblast Roof Ventilators
Ventilators

UDVL Upblast Roof Ventilators

Continental Fan's UDVL Upblast Roof Ventilators provide superior performance and a low silhouette design. These rugged, high quality ventilators are constructed with a heavy duty welded steel base, galvanized butterfly damper section and a spark resistant cast aluminum airfoil axial impeller. The UDVL direct drive low silhouette upblast roof ventilator requires no belts or pulleys, and is ideal...

Read More »
Belt Drive Ventilator moves air at 50,000+ cfm.
Fans

Belt Drive Ventilator moves air at 50,000+ cfm.

Suitable for cooling personnel and equipment, Big Dog(TM) Ventilator can also be slowed down to move less air for winter de-stratification. Unit has 72 in. diameter, 3 hp, belt-drive, variable speed circulation fan fitted with 6 fully adjustable fiberglass air deflectors, allowing air stream to be aimed wherever it is needed. At full power, air speed at fan outlet is approximately 1,500 fpm with...

Read More »
Manhole Ventilation Unit has low profile/lightweight design.
Vents

Manhole Ventilation Unit has low profile/lightweight design.

Designed to maintain and re-direct air flow with minimal restrictions into manholes, sewers, and tanks, Manhole Ventilation Passthru (MVP) combines low profile air vent, 90° elbow, and built-in mounting in one unit. Weighing 11 lb, PVC coated, vinyl and polyester collapsible duct is heat resistant up to 180°F and stores in its own storage bag.

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Water Treatment Equipment

ABB Wins $73 Million Power Order in Switzerland

New control system will facilitate more efficient management of nuclear power plant Zurich, Switzerland, - ABB, the leading power and automation technology group, has won orders worth $73 million from Kernkraftwerk Leibstadt (KKL) to refurbish and upgrade the non safety related operational control and automation system at their 1,220 megawatt Leibstadt nuclear power plant in Switzerland. For this...

Read More »
Safety Ventilator has pushbutton Inspiratory Hold feature.
Ventilators

Safety Ventilator has pushbutton Inspiratory Hold feature.

Inspira Advanced Safety Ventilator comes in volume- or pressure-controlled versions with or without Inspiratory Hold feature. Suited for imaging or resistance/compliance studies, this feature enables Inspiratory Hold initiation via one-button actuation. Additional features include airway pressure monitoring, adjustable I:E ratio, built-in sigh breath, and Assist Mode to facilitate weaning. PEEP...

Read More »
Safety Ventilator includes hold function.
Ventilators

Safety Ventilator includes hold function.

Suitable for variety of animals from mice to cats, Inspira Advanced Safety Ventilator with Inspiratory Hold function is available in both volume and pressure controlled models. Unit features airway pressure monitoring, adjustable I:E ratio, built-in sigh breath, and Assist Mode to help wean animal off ventilator. To utilize Hold function, user enters desired hold time and initiates hold with...

Read More »
Louvered Penthouses are Miami-Dade qualified.
Equipment Enclosures

Louvered Penthouses are Miami-Dade qualified.

Designed to function as gravity ventilators or equipment enclosures, Models ESD-635PD and EHH-601PD are approved for use inside or outside Florida's High Velocity Hurricane Zone. Model ESD-635PD features 6 in. deep drainable-style louver blades, while Model EHH-601PD has 6 in. deep, horizontal, wind-driven rain louver blades. Both feature all-aluminum construction and max design wind load of 115...

Read More »
Medical Ventilator is designed for mice.
Respirators and Masks

Medical Ventilator is designed for mice.

Suitable for any animal with tidal volumes of 30-350 Â-µL and respiratory rates of 60-400 breaths/min, MiniVent features rod clamp that allows it to be positioned directly next to animal. Ventilator employs valveless rotary plunger that eliminates clogging during ventilation cycle. Inspiration and expiration is controlled by synchronized forward and rotating movement of cylinder and plunger....

Read More »
Ventilators

Forced Ventilation for Enclosures!

Electra-Kool(TM) Systems consist of a pressure blower with fitted filter system to forcefully ventilate, dust-proof and/or pressurize enclosures with cooler, ambient air. Each system consists of a cast aluminum or powder-coated steel blower, with a square flanged outlet for mounting. Inlet and outlets have fingerguards for protection. A bracket, mounted to the inlet, allows the filter cartridge...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers