Turning Machinery

Mill-Turn Center machines large parts and long workpieces.
Milling Machines

Mill-Turn Center machines large parts and long workpieces.

With Z-axis rapid traverse rate of 32,000 rpm and Y-axis stroke of 2.16 ft, NT6600 DCG® provides maximum machining length of 19.93 ft. Automatic Tool Changer cuts tool change time to less than 10 sec from any position on spindle. Combining lathe with machining center, system includes direct drive motors to eliminate backlash and enable high-speed rotation. DCG technology minimizes vibration by...

Read More »
Miyano to Feature Three New ABX Models at IMTS 2008
Turning Machinery

Miyano to Feature Three New ABX Models at IMTS 2008

Wood Dale, IL June 2, 2008 - At IMTS 2008, Miyano Machinery will be featuring three new ABX Super Turning Center Models: ABX-51TH3, ABX-51THY, and ABX-51THB. Equipped with two spindles and three turrets, Miyano's ABX Super Turning Centers are capable of processing complex parts efficiently in a single setup. The ABX-51TH3 has upper two turrets on the left and right side, both with Y-axis...

Read More »
Abrasive Grinding Center optimizes interrupted cuts.
Turning Machinery

Abrasive Grinding Center optimizes interrupted cuts.

Equipped with hydraulic part holding and tailstock, MAX-TEK STC-400 enables machining of difficult interrupted cut components, such as centrifugal pump and compressor impellers up to 25 in. dia. Machine features 50 hp main spindle with speeds up to 12,000 rpm. Utilizing grinding wheels up to 20 in. dia, MAX-TEK STC-400 provides X-axis travel of 13.9 in. and Z-axis travel of 20 in. Linear...

Read More »
Mori Seiki Features Innovative Lineup at WESTEC 2008
Miscellaneous Controls

Mori Seiki Features Innovative Lineup at WESTEC 2008

Chicago, Illinois, February 14, 2008 - Mori Seiki will showcase the best of its innovative machining solutions at WESTEC 2008 from March 31 - April 3 at the Los Angeles Convention Center, Los Angeles, CA. The industry leader in cutting edge machine technology will feature the NZ2000 T3Y3, the world's first multi-axis machine manufactured with three turrets each containing a built-in milling...

Read More »
Direct-Drive Indexer Improves Cycle Time by 30%
Milling Machines

Direct-Drive Indexer Improves Cycle Time by 30%

Hardinge Inc., Workholding Division May 30, 2007 CNC Engineering is a job shop located in Lake Elsinore, California. CNC Engineering manufactures tight tolerance, high quality parts for aerospace, defense and commercial industries requiring high precision work. Some production runs are for 10,000 pieces or more. The company does both CNC milling and turning and has been in business for 21 years....

Read More »
VMC provides turning and milling in same fixture.
Milling Machines

VMC provides turning and milling in same fixture.

Available with 1 or 2 milling spindles with speeds up to 12,000 rpm, and 1 or 2 turning spindles with speeds up to 4,500 rpm, System 8 Milling-Turning Centers provide complete machining of semi-finished and saw sections on one machine. Four configurations are available, each with 180 tool positions and XYZ travel up 31.5 x 20.5 x 20 in. Rotating/swiveling trunnion unit has continuously variable...

Read More »
Turning Machinery

Vertical Turning Center Display Highlights Multi-Tasking Capabilities

Chicago, IL, September 6, 2006 - At IMTS 2006 Giddings & Lewis features the G&L designed tooling system and heads that add multi-tasking capabilities to the vertical turning center product line, the VTC Series. Large capacity and easy access The VTC Series product line now consists of 6 models with table sizes ranging from 1250 mm (49.2 in) to the new 3500-mm (137.8 in) version which has a...

Read More »
Turning Center features twin-spindle design.
Turning Machinery

Turning Center features twin-spindle design.

Designed to machine parts with up to 9.8 in. dia, DVH250i duo vertical pick-up turning center includes shuttle-type part feeder and enables parallel production of 2 identical or different parts simultaneously at rates up to 200 parts/hr. Machine has work envelope of 11.8 x 7.9 in. and requires 64.6 sq ft floor space, with axis traverse rates of 1,772 ipm in X direction and 1,181 ipm in Z...

Read More »
Puma MX Mills And Turns in a Single Setup
Milling Machines

Puma MX Mills And Turns in a Single Setup

West Caldwell, NJ - The Puma MX series mill-turn adds true milling capabilities to a powerful Daewoo turning center. The new design provides unmatched flexibility within a complete spectrum of part geometries. From simple turning or milling to complex, simultaneous, multi-axis machining, complex parts can be produced on one machine in a single setup. The dual spindle, multi-tasking Puma MX is...

Read More »
Turning Machinery

Turning Center features 3 turrets, each with Y axis.

Combining turning and milling operations, Super NTY3 features three 6,000 rpm milling motors that can simultaneously machine 2 flat surfaces on one spindle and one surface on the other. Each turret holds 12 driven or 24 stationary tools. Accelerating Y axes have travels of 2.44 in., and up to 29/20 hp is available for shaft/work turning with synchronized spindles. Super NTY3 has max turning...

Read More »

All Topics