Turbines

Turbines

First Two Ge F-Technology Gas Turbines Begin Operation in Saudi Arabia

ATLANTA, GEORGIA - April 5, 2006 - Two GE Frame 7FA gas turbines have started operating at the 'Uthmaniyah Cogeneration Plant in Saudi Arabia, becoming the first F-technology machines to enter service in the Kingdom. The two gas turbines are among six F-technology units GE has supplied for three cogeneration plants being built by the Tihama Power Generation Company of Saudi Arabia. The largest...

Read More »
Turbines

Dutch Fertilizer Manufacturer Selects New Frame 5-2E Gas Turbine From GE Oil & Gas

FLORENCE, ITALY - March 20, 2006 - Yara Sluiskil B.V. of the Netherlands will replace a gas turbine at its fertilizer plant in Sluiskil with an MS5002E (Frame 5-2E) gas turbine from GE's Oil & Gas business, marking the first project for this new GE technology. Operating in a cogeneration mode with a waste heat recovery generator, the new machine will produce 30 megawatts of electrical power for...

Read More »
Turbines

Wind Turbines come in 2.5 and 3 megawatt versions.

Featuring permanent magnet synchronous generator and modular converter with full power conversion, Wind Turbines are based on force flow optimized bedplate, which joins all nacelle components on common structure. Machines rated at 2.5 megawatt feature 100 m rotor diameters, while 3 megawatt units offer 90 and 94 m rotor diameters. Pitch regulation system with power/torque control and use of drive...

Read More »
Turbines

Wind Turbine is designed for low-wind areas.

Rated at 1.5 megawatt, 1.5xle model features LM 40 rotor blade with 82.5 m rotor diameter that is suited for class III or weaker wind applications. Extreme cold-weather package provides for nominal operation at temperatures as low as -30°C and in survival mode without operation at temperatures as low as -40°C. Available tower heights are 58.7, 80, and 100 m, and tallest version is...

Read More »
Steam Turbines range from 1-600 hp.
Turbines

Steam Turbines range from 1-600 hp.

Single-stage Series 400RT is available in sizes from .75-450 kW with pressures to 700 psig and temperatures to 825°F. Dual exhaust outlets are symmetrically located and can be used individually or jointly. Idealube lubrication system automatically provides flood, splash, and mist lubrication when required. Monolithic wheel design is standardized and includes stainless steel milled style...

Read More »
Turbines

Gas Turbine Combustion System reduces NOx emissions.

Dry Low NOx combustion system reduces NOx emissions for company's 12 MW class 10-2 gas turbine from 25 to 15 ppm. Emissions level is guaranteed over operating conditions spanning 50-100% of load and ambient temperature range of -20° to +100°F. It requires no catalytic hardware minimizing number of combustion parts. Combustion chamber incorporates 4 GE5 premixed pilot burners and...

Read More »
Gas Turbine suits industrial applications in 6 MW range.
Electrical Power Generators

Gas Turbine suits industrial applications in 6 MW range.

Cold-end-drive, single-shaft Taurus(TM) 65 generator suits cogeneration, combined cycle, and other power generation applications. Generator set is rated at 6000 kWe for continuous duty at ISO conditions. It features 13-stage axial compressor with 15:1 pressure ratio that produces air inlet flow of 19.4 kg/sec, and utilizes 3-stage turbine with shrouded stage-3 turbine blade. SoLoNO(TM) combustion...

Read More »
Turbines

Miniturbine suits industrial power generation applications.

Based on aero-derivative natural gas fired turbine, ENT 400 is designed for applications where its exhaust gas can be used for direct heating and drying applications. Product provides up to 6 MMBtu/hr of heat as direct exhaust at 27,450 lb/hr at 1013Â-ºF and 396 kW of continuous electric power. System is fully integrated in compact container and includes all controls and utility switchgear.

Read More »
Turbines

Precision Turbine incorporates governed design.

Dotco® 12R91 series precision turbine allows tool to idle and provides full power under load. Pre-loaded bearings maintain stability in spindle to allow for smoother cuts. Available with 3 mm and 1/8 in. collets, 65,000 rpm rear exhaust governed tool suits applications that previously used 100,000 rpm non-governed tools. It is available in models with 2 and 4 ft overhose to direct exhaust...

Read More »
Turbines

Gas Turbine offers improved efficiency.

Built upon Frame 6FA gas turbine technology, Model PG6111FA offers output increase to 75.9 megawatts and heat rate improvement of 2.7% over previous model. Combined-cycle service provides 117.7 megawatt output with 54.7% efficiency. Firing temperature is rated to 2420°F and pressure ratio is 15.6. DLN-2.6 combustion system is capable of 15 ppmvd NOx. Turbine suits a variety of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers