
Cut Through a Variety of Material Types with Eraser's Tubing Cutters
The Eraser Company offers a wide range of tubing cutters, including the FTC1, LFTC1 and RTC1 Tubing Cutters. These manual feed machines feature a foot-pedal activated cutter head to slice through a variety of material types.- Model FTC1 is a Flexible Tubing Cutter capable of processing material such as PVC, nylon, rubber, vinyl and many others. Material size can range from less than 1/4 up...
Read More »
Abrasive Belt Coping Machine has compact footprint.
From hand railings and custom furniture to car chassis and airplane frames, structural tube preparation is an essential part of fabrication. Tube coping is essential to promoting strong welds; this process requires one piece of tube to be cut and fit to another piece of tubing in preparation for welding. Linders Specialty Company is the original designer and manufacturer of the abrasive belt...
Read More »
Abrasive Belt Coping Machine has compact footprint.
From hand railings and custom furniture to car chassis and airplane frames, structural tube preparation is an essential part of fabrication. Tube coping is essential to promoting strong welds; this process requires one piece of tube to be cut and fit to another piece of tubing in preparation for welding. Linders Specialty Company is the original designer and manufacturer of the abrasive belt...
Read More »Tube Production System processes 5,000 pieces per hour.
Equipped with twin machining head that fits onto standard head, ACS-® + CFMtwin can cut 2 tube or bar sections simultaneously, then machine both ends of both workpieces, also simultaneously. When in twin mode, machine can process 2 workpieces of 10–41.5 mm OD each into finished lengths from 10–1,500 mm. When twin head is removed, standard machining head can process single workpiece up to...
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »Tube Production System processes 5,000 pieces per hour.
Equipped with twin machining head that fits onto standard head, ACSÃ-® + CFMtwin can cut 2 tube or bar sections simultaneously, then machine both ends of bothÃÂ workpieces, also simultaneously. When in twin mode, machine can process 2 workpieces of 10–41.5 mm OD each into finished lengths from 10–1,500 mm. When twin head is removed, standard machining head can process single...
Read More »
See Rattunde in Hall 6, Stand E-40 at Tube Fair in Dusseldor, April 7-11, 2014!
Major German supplier of- finished length tube and solid bar processing equipment offers dual tube cutting and finishing in one setup; produces up to 5000 pieces per hour with up to 40% energy savings Rattunde Corporation, a German-based manufacturer of finished length tube and solid bar production, today announces the introduction of the ACS® + CFMtwin machine, the newest member in the...
Read More »
See Rattunde in Hall 6, Stand E-40 at Tube Fair in Dusseldor, April 7-11, 2014!
Major German supplier ofÃ- finished length tube and solid bar processing equipment offers dual tube cutting and finishing in one setup; produces up to 5000 pieces per hour with up to 40% energy savings Rattunde Corporation, a German-based manufacturer of finished length tube and solid bar production, today announces the introduction of the ACSî + CFMtwin machine, the newest member in...
Read More »
PMC-Colinet Streamlines Huge Pipe Keyway Machining with Unique Angle Head from Heimatec
Ohio manufacturer of oil field equipment saves 184 hours on one high-precision cutting tool head made of Nitralloy-® PMC-Colinet has a long history in the pipe and tube market, having started in 1912 and introduced the world's first carbide-tooled pipe threading machine in 1958. Today, the company is established as a primary supplier of machines to the OCTG sector.  Its customers...
Read More »
PMC-Colinet Streamlines Huge Pipe Keyway Machining with Unique Angle Head from Heimatec
Ohio manufacturer of oil field equipment saves 184 hours on one high-precision cutting tool head made of NitralloyÃ-® PMC-Colinet has a long history in the pipe and tube market, having started in 1912 and introduced the world's first carbide-tooled pipe threading machine in 1958.ÃÂ Today, the company is established as a primary supplier of machines to the OCTG sector.ÃÂ ÃÂ ...
Read More »ASAP Hydraulics Is Pleased to Highlight Specialty Saw
ASAP Hydraulics is pleased to highlight our relationship with Specialty Saw. Specialty Saw is the first company that we are aware of that has a hose cut-off machine specifically designed to cut wire braided/ spiral hose. Specialty Saw Hose Cut-off Machines Specialty Saw's Clean-Cuts™ hydraulic hose cutting system is break-through technology using a toothed knife, cutting with the backs of each...
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »