Tube / Pipe / Hose Cutters and Cutting Machinery

Extended Service Press Tool joins up to 4 in. diameter pipe.
Tube / Pipe / Hose Cutters and Cutting Machinery

Extended Service Press Tool joins up to 4 in. diameter pipe.

Featuring 4 sec cycle time andÂ- up to 42,000 cycle service intervals, RP 340 can join ½–4 in. dia copper and stainless steel tubing as well as ½–2 in. dia PEX tubing and black iron pipe. Size and weight lend to maneuverability while reducing operator fatigue. Operating in temperatures from 15–122°F, tool offers ability to rotate...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

M&S Centerless Grinding Manufacturers Solar Energy Components

The tolerances for diameter size and roundness on the ID of a special tube made manufacturing costly and vendors difficult to find. Product acceptance was going through the roof, but the lack of an adequate supply of this key component caused delivery delays and increasing order backlog which jeopardized the entire project. Material: 304 SST tubing Critical Dimensions: OD – approximately .2500...

Read More »
Tool Kit helps users smoothly install pipe joints.
Tube / Pipe / Hose Cutters and Cutting Machinery

Tool Kit helps users smoothly install pipe joints.

Suitable for plastic pipe specialists, fire protection, and plumbing contractors, TC2PPDEB1-2SK includes Reed Quick Release™ Tubing Cutter and 2 DEB deburr/chamfer tools for plastic pipe, all in plastic case. Tubing cutter produces square cut so pipe bottoms out in fitting for maximum strength, while deburr/chamfer tools allow even distribution of glue around fitting for optimal fit of glue...

Read More »
Tube Cutter processes flexible tubing to tight specifications.
Tube / Pipe / Hose Cutters and Cutting Machinery

Tube Cutter processes flexible tubing to tight specifications.

Featuring 10 feed rates, WC601D Rotary Blade Tube Cutter is capable of processing materials such as flexible polyurethane, flexible PVC, nylon reinforced hose, and rubber hose to programmed length and number of pieces. Adjustable belt feed and rotary cutter ensure there is no crushing of material, either along length or on cut ends. Batching feature allows all parameters for frequently run jobs...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Mazak Optonics Corporation to Host Laser Technology Days

Elgin, IllinoisÂ- – Mazak Optonics Corp. will be hosting Laser Technology Days on July 24 & 25, 2013. The event provides the opportunity to attend cutting-edge seminars and view emerging technology in action at the world's largest laser-dedicated Technology Center. A highlight of Laser Technology Days will be the global introduction of the industry-leading OPTIPLEX CO2 job shop...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Horizon Industries adds an Engine Lathe and Automatic Saw

Horizon Industries, located in Columbia, Pa, has added two new machines to allow for larger shafts or pipes in short production runs.   The Clover Engine Lathe has a large thru hole (4 1/8") to allow for larger pieces of tubing, pipe and other metal parts in short production runs.  Because there is a very short set up time on this machine, we can take on customers with little notice,...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

New Servo Control Tube Re-Cut Machine by Haven

Brunswick, GA - Haven Manufacturing, the industry leader in the design and production of reliable, performance enhancing tube and bar cutting machines, is excited to premier the latest addition to their highly respected product line. The Haven Model #873 Servo Tube Recut Machine enables manufacturers to cut round, square, and rectangular tubing to a variety of precise lengths quickly and...

Read More »
Multi-Material Cutter offers max cutting force of 600 lb.
Tube / Pipe / Hose Cutters and Cutting Machinery

Multi-Material Cutter offers max cutting force of 600 lb.

Able to produce round or flat material up to 3.94 in. wide and 5/8 in. thick, Model MMC200 canÂ- cut copper wire/cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat/ribbon cable, strapping, hosing, and tubing. Microprocessor-controlled unit can be programmed to cut any length with 1% or better tolerance reliant on material construction....

Read More »
Do You Have Tough Material to Cut? Try the RTC1 Rigid Tubing Cutter from The Eraser Company!
Tube / Pipe / Hose Cutters and Cutting Machinery

Do You Have Tough Material to Cut? Try the RTC1 Rigid Tubing Cutter from The Eraser Company!

RTC1 Rigid Tube Cutter Do you have tough material to cut? Try the RTC1 Rigid Tubing cutter from The Eraser Company! Model RTC1 Manual Feed Rigid Tubing Cutter is capable of processing copper, aluminum and mild steel. Model RTC1 has an unlimited cut length, is easy to use and offers production flexibility. This is the perfect tool for rigid tube cutting! Material Size: 1/8"ID to 7/16" O.D. Cut...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers