Tube / Pipe / Hose Cutters and Cutting Machinery

Dial Loader automates cut-off of shaped tubing.
Tube / Pipe / Hose Cutters and Cutting Machinery

Dial Loader automates cut-off of shaped tubing.

Used to automate loading of tube shears or saw cut off machinery, dial loader is designed for continuous processing of various shaped tubing. Loader handles complete bundles of mill length tubing, which is supported by 4 heavy-duty steel arms with nylon rotary dials positioned at ends. Split design dials accommodate up to 24 different sizes/shapes while orienting tubing for optimal cutoff angle,...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Cut-Off Machines feature rotating cutting head.

REIKA Compact Cut-Off Machines cut and simultaneously face and chamfer OD/ID on both tube ends. Tube is held in fixed position, while cutting head rotates, minimizing positioning error and eliminating marking on OD surface. Machines offer production rates of 1,900 part/hr with tolerance rates of ±0.05 mm. Equipped with Siemens or Allen Bradley Controls, machines handle tubes up to 65 ft...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Saw and Track System cuts any size tank, vessel, or pipe.

Infinitely adjustable APS-438 Air-Powered Saw and FlexTrack® system features track sections that create secure system that mounts to tank or pipe via tack welds. Gliding along track system on trolley with 4 V-grooved, stainless steel roll guides, saw is fully supported and produces square cuts within ±1/16 in. with no heat affected zone. Diamond tipped steel and fiberglass reinforced...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Fin Tube Removal Tool eliminates chipping hammers/grinders.

Air-powered MILLHOG® Fin Tube Removal Tool clamps to tube ID and features blade design that separates fin from tube and then bevels tube end in one step. With no reaction torque to user, chatter-free tool can remove up to 4 in. of fin from tube OD in under 2 min. Product may be used in any position, and cutter blade is made of resharpenable tool steel. While heavy-duty rack and pinion feed...

Read More »
Planetary Cutter offers capacity of 1/4-8 in. OD.
Tube / Pipe / Hose Cutters and Cutting Machinery

Planetary Cutter offers capacity of 1/4-8 in. OD.

Operating without debris or dust, Series CFPC can be equipped with dead stop assembly and is available in off-line and in-line models. Designed to cut tubular extrudates, cutting assembly travels with product while blade makes incision. Machine provides 60 cuts/min with line speed of 20 fpm and cut-to-length accuracy of ±0.010 in./ft. It includes 2 operator controls, FRL with lockable air...

Read More »
Tube / Pipe / Hose Cutters and Cutting Machinery

Heavy Wall End Prep Tool meets offshore requirements.

MILLHOG® Dictator I.D. Clamping Welding End Prep Tool is designed for dry cutting stainless steel, duplex, and other hard pipe up to 20 in. OD found in offshore facilities. Featuring tapered roller bearing drive mechanism and EscoLock blade lock system, product develops 4,000 lb-ft torque at cutter blade and pulls continuous thick chip. Unit has self-centering mandrel, uses 8 sets of...

Read More »
Tubing and Hose Cutters have portable, handheld design.
Tube / Pipe / Hose Cutters and Cutting Machinery

Tubing and Hose Cutters have portable, handheld design.

Easycut and Minicut cleanly cut soft or semi-rigid, plastic or rubber tubing and hose without leaving burrs or distortion. Made from plastic, units fit in pocket or toolbox and feature steel cutting blades that are concealed when tool is closed to avoid cutting hazard. Easycut handles tubing and reinforced hose up to 1Â-½ in. OD and has handles manufactured from nylon. Made from...

Read More »
End Prep Cutter Blades cut without fluids.
Tube / Pipe / Hose Cutters and Cutting Machinery

End Prep Cutter Blades cut without fluids.

MILLHOG® Cutter Blades feature radical chip breaker to direct chip away from tube surface and minimize heat generated. Made from T-15 tool steel and titanium nitride-coated for added lubricity, blades can cut stainless steels, P-91, and other hard materials without fluids. Capable of beveling, facing, and boring simultaneously, MILLHOG Blades are available in any angle of end prep including...

Read More »
Gate Cutters have heavy-duty design.
Tube / Pipe / Hose Cutters and Cutting Machinery

Gate Cutters have heavy-duty design.

Drop forged from alloy steel, Gate Cutters are precision machined and heat treated to ensure sharp, durable edges. Products are available with flat or rounded back blades and feature slim line profile and fast-acting coil spring. Both 5 and 6 in. models have bow style handles, while 6 and 7 in. flat back cutters are offered with right or left hand, ergonomic style handles or adjustable blade...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers