Track-Type Tractors are Tier 2 compliant.
Vehicle Tractors

Track-Type Tractors are Tier 2 compliant.

Turbocharged engines of earthmoving Caterpillar D3G, D4G, and D5G Tractors meet EPA Tier 2 and CE Stage II emission norms. Power outputs of Models D5G, D4G, and D3G are 90 hp, 80 hp, and 70 hp, respectively. Product Link system, with GPS technology, provides up-to-date information on machine location, hours, and health. Machine-monitoring package alerts operator of machine conditions without need...

Read More »
Utility ATVs offer power, stability, and handling.
Vehicles

Utility ATVs offer power, stability, and handling.

ATVs feature 500cc or 650cc Rotax® engines; full-time, progressively locking, all-wheel drive system; and full set of front and rear cargo racks or rear cargo box. Suited for hauling, towing, and pulling, Buck, Buck EXT, and Buck EX have gear-on-gear transmission, 1,100 lb towing capacity, and top ground speed exceeding 45 mph. Trail Buck 500/650/650 EXT/650 EX models feature continuously...

Read More »
Synch Module suits Stratum 3 applications
Synchronizers

Synch Module suits Stratum 3 applications

Suited for synchronous timing source in SONET/SDH network elements, Model STC3500 integrated single-chip solution operates in free-run, locked, and hold-over modes. It supports master/slave operation, includes continuous input reference quality monitoring, and accepts 8 auto frequency detect reference inputs from 8 kHz to 77.76 MHz and one 8 kHz cross-reference. Module provides 4 output signals...

Read More »
Fall Protectors

Roof Anchors provide rooftop fall protection.

Miller Claw Permanent Roof Anchor provides anchorage point when attached to wood rafter or truss member. Miller Single D Permanent Roof Anchor provides one D-ring anchorage point when securely installed on wood roof sub-surface and finished with selected roofing materials. Miller Double D Permanent Roof Anchor provides 2 D-ring anchorage points. Claw is stainless steel and D-rings are zinc-plated...

Read More »
LED Taillight suits forklifts and lift trucks.
Lights

LED Taillight suits forklifts and lift trucks.

Compact, low-profile Model 280 LED Rear Combination Lamp incorporates stop, turn, tail, and back-up functions in red, amber, and white colors. Lamp has 2-point mount and plugs directly into vehicle harness through an integral connector, without using jumper harnesses. Completely sealed unit is protected from water, dust, and corrosion.

Read More »
Aligners

Laser Alignment System adapts to optical transit devices.

Machined to dimensional specifications of optical telescopes, battery-operated, 2.25 in. Microgage Laser System fits into standard optical hardware mounts. Laser beam is projected on exact centerline for optical mount, while Microgage digital receiver tracks position of laser beam with electronic detector. Display provides quantitative reading of measurement and offers various user functions....

Read More »
Heated Windshield Wipers promote safer winter driving.
Windshield Wipers

Heated Windshield Wipers promote safer winter driving.

Wired directly into ignition system, HotWipers(TM) start de-icing process immediately. Built-in etched foil heating element maintains 50°F min at -60 to +100°F to keep windshields free from ice and snow buildup. Products feature Nordel® elastomer wipers with stainless steel blades that are black anodized to prevent glare. They come in 13, 20, 22, 24, and 26 in. sizes, complete...

Read More »
Ballasts suit high-wattage, metal halide applications.
Ballasts

Ballasts suit high-wattage, metal halide applications.

Compact Core Ballasts utilize 4Â-¼ x 4¾ in. core and are available for 1,000 W probe-start, 1,000 W pulse-start, and 875 W pulse-start metal halide lamps. Units comply with ANSI, UL, and CSA standards. Multi-tap formats include 120/208/240/277 quadri-volt® and 347/480 dual-volt with 120 V output tap. Ballasts are suited for high bay industrial fixtures, outdoor flood and area...

Read More »
Platform Sliders suit low flatbed and drop-deck trailers.
Trailers

Platform Sliders suit low flatbed and drop-deck trailers.

INTRAAX® low-ride, single-axle AAZL 23K and tandem AAZL 46K, offered in ride heights from 6.5-12 in., combine smooth-sliding Z profile box and integrated suspension system. Slider box fits between trailer I-beams with lock-pins engaging through holes in web of beams. Platform sliders fit I-beam centers of 37, 38, 43, and 44 in., and tandem accommodates 49, 60, and 72 in. axle spreads. Units...

Read More »
Protector Caps cover exposed ends to prevent worker injury.
Safety Equipment

Protector Caps cover exposed ends to prevent worker injury.

Used around construction sites, PC-110 BarGard® caps protect workers from serious injury from exposed rods, rebar, pipe-end, and stems. They meet CAL OSHA Standards and fit Rebars No. 3-8, 3/8 to 1 in. dia. Products are bright lime green in color for visibility and withstand varied weather and temperature conditions. They install by slipping on and locking into place.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers