Absolute EMS Increases Production Capacity with New Juki Line
Software

Absolute EMS Increases Production Capacity with New Juki Line

MORRISVILLE, NCÂ- – Juki Automation Systems, a world-leading provider of automated assembly products and systems and part of Juki Corporation, announces that Absolute EMS purchased a new line as part of its recent expansion. “We thoroughly understand the dynamic nature of the electronics market, and our new Juki equipment will allow us to enhance our supply chain structure and...

Read More »
Hose and Wire Protection Sleeves

KEMET Releases New UL Approved PET Sleeving

UL Recognized Sleeving for Screw Terminal and Snap-in Capacitors GREENVILLE, S.C., -- KEMET Corporation (NYSE: KEM), a leading manufacturer of tantalum, ceramic, aluminum, film, paper and electrolytic capacitors, today announced its launch of a new UL approved PET sleeving solution for both snap-in and screw terminal capacitors. This release furthers KEMET's commitment to improving the safety of...

Read More »
Brackets

TecsPak® Wheel Chocks

Miner Elastomer Products Corporation is proud to introduce our new 2000 Series Wheel Chocks and Mounting Brackets! So when you buy 5 of any one Wheel Chock, you will receive a 6th Wheel Chock absolutely free while supplies last! Our strong, lightweight and crush-resistant chocks are specifically designed for over-the-road trucks and mining haul truck applications. They will not damage tires even...

Read More »
Transportation Buses

PCIe Bus Adapter allows PC to communicate with PMC module.

With APCe8670 Carrier Card, users can interface PMZ mezzanine module to PC across PCI Express bus. Bridge chip handles PCI-X to PCIe conversion between plug-in PMC module and host computer. Carrier's PCIe x4 interface supports up to 4 serial lanes for rapid data transfer. Three PMC PCI-X bus sockets interface through bridge to carrier's PCIe x4 edge connector, while other PMC socket routes 32...

Read More »
Trucks & Carts Buying Guide
Sponsored

Trucks & Carts Buying Guide

There are actually many different types of trucks & carts that each have unique applications for material handling. In this buying guide, learn about what you should look for depending on your specific application.

Read More »
Insitu to Demonstrate ICOMC2 at AUVSI's Unmanned Systems 2013 Event
Controls and Controllers

Insitu to Demonstrate ICOMC2 at AUVSI's Unmanned Systems 2013 Event

BINGEN, Wash. - Insitu announced today that it will demonstrate the Insitu Common Open-mission Management Command and Control (ICOMC2) ground control station at the Association for Unmanned Vehicles Systems International (AUVSI) Unmanned event, Aug. 12-15 in Washington, D.C. ICOMC2 is designed for expeditionary use and lets one operator manage multiple unmanned vehicles. Its open-architecture...

Read More »
Bar Feeder Alignment System accepts bores down to ¾ in. dia.
Aligners

Bar Feeder Alignment System accepts bores down to ¾ in. dia.

Featuring instantaneous set-up using self-centering laser tool,Â- Model L56SS provides laser beam that is straight to ±.010 in. at 10 ft. Battery-powered system is chucked within lathe's spindle so that laser beam shoots through spindle and down carriage of bar feeder. Two targets register left/right and up/down positions of front and back portion of bar...

Read More »
Trailers

Compact Trailer is optimized for maneuverability and capacity.

Designed to fit into tight spaces, Self-Propelled Modular Transport (SPMT) 600 has minimum height of 30 3/8 in., width of 7 ft 6 in., and capacity of up to 67.5 tons per unit (22.5 tons per axle line). Each self-leveling wheel unit hasÂ- steering and lifting cylinder that optimizes control and traction, and pivoting wheel assemblies allow trailer to move forward and backward as well as...

Read More »
Automotive Trucks

Regional Haul Tractor is powered by 13 L SCR engine.

With 370 or 410 hp MaxxForce® 13 engine featuring respective torques of 1,350 or 1,900 lb-ft and Selective Catalytic Reduction (SCR) emissions technology, International® TranStar® has 107 in. bumper-to-back-of-cab length, comes in 4 x 2 and 6 x 4 axle configurations, and is available with electronic stability control. Setback axle and 50° wheel cut tightens turning radius,...

Read More »
Abrasive Grinding Wheel removes mill scale.
Wheels

Abrasive Grinding Wheel removes mill scale.

Pairing refined, friable abrasives with open diamond cut pattern, FLEXCUT MILL SCALE Grinding Wheel can remove thin layer of iron oxide covering surface of hot rolled steel plates, sheets, or profiles without glazing or disc clogging. In addition to removing mill scale, wheel features FE-Free formulation that is guaranteed to not contaminate aluminum and is effective when used for rust removal on...

Read More »
FOR-A Compact Switcher Series and Multi-Channel Frame Synch to Make IBC Debuts
Converters

FOR-A Compact Switcher Series and Multi-Channel Frame Synch to Make IBC Debuts

Chessington, UK -- FOR-A Corporation announces its plans at the upcoming IBC 2013 show in Amsterdam next month. The company will show its new compact video switcher series (HVS-XT) and the FA-1010 multi-channel frame synchronizer for the first time in Europe. Other product highlights within the company’s IBC booth will be the FA-9520 multipurpose signal processor and the new MINI M/E feature...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics