Signal Receivers

Transmitter/Receiver uses ISM band to relay level data.

Enabling transmitting of data between process sensors/DCS or SCADA systems, DX80 Wireless Transmitter and Receiver includes wireless transmitter node accepting up to 2 analog and 2 discrete switch inputs. Including wireless receiver gateway that accepts up to 55 nodes, system has embedded site survey tool which analyzes strength of radio signal between gateway and specified node. Housed in IEC...

Read More »
Level Indicating Transmitter employs non-contacting sensor.
Level Transmitters

Level Indicating Transmitter employs non-contacting sensor.

Mounted at top of tank, LIT25 uses ultrasonic sensor to accurately measure fluid level for applications including chemical inventory as well as water and wastewater level. Standard features include 4-digit LCD, isolated 4-20 mA output, and control relay. Watertight NEMA4X enclosure and display can be mounted within 500 ft at convenient location for operators. To facilitate calibration without...

Read More »
CCTV Video Transmitters/Receivers have self-healing feature.
Signal Receivers

CCTV Video Transmitters/Receivers have self-healing feature.

Digital fiber optic video transmitters and receivers with bi-directional data include FVTFVR1010SHR single channel with data series, FVT/FVR4014SHR with 4 video and data channels, and FVT/FVR8018SHR with 8 video and data channels. In event of broken fiber connection, video and data transmission is seamlessly re-routed when system is configured in ring topology. Bi-directional data transmission...

Read More »
Transmitter combines humidity and temperature sensing.
Temperature Sensors / Detectors / Transducers

Transmitter combines humidity and temperature sensing.

Series RHP combines voltage or current humidity transmitter output with passive temperature thermistor or RTD output. Polymer capacitance humidity sensor is not affected by condensation, fog, high humidity, or contaminants, and humidity sensors are available with 2% or 3% accuracies. In addition to optional 2-line alphanumeric LCD, duct-mounted transmitters are available with interchangeable...

Read More »
Narrowband Radio Modules feature multiple channels.
Signal Receivers

Narrowband Radio Modules feature multiple channels.

Programmed with 4 channels, transmitter Model CDP-TX-05M-R and receiver Model CDP-RX-05M-R feature narrowband FM 25 kHz channel spacing and operating temperature of -20 to +65°C. Using TCXO as reference oscillator circuit of radio component ensures frequency stability. With output of 10 mW authorized for narrow band FM and double superheterodyne receivers with receive sensitivity in...

Read More »
Transmit-Receive Module Pair operates at E-band frequencies.
Signal Receivers

Transmit-Receive Module Pair operates at E-band frequencies.

Operating over frequency spectrum of 71.0-86.0 GHz, E-band TX/RX module pair is designed for broadband point-to-point radios carrying voice and data traffic at multigigabit/sec rates. System features conversion gain of 15 dB and output power of 16 dBm along with power detector on TX output. Supporting modulation formats ranging from on/off keying to 16 QAM modulation, pair also includes on-board...

Read More »
Level Transmitters

K-TEK's AccuTrak AT100 and AT200 Are First Magnetostrictive Level Transmitters to Achieve FOUNDATION Fieldbus, ITK 5.1.0 Certification

Level transmitters feature dual compartment design, patented, torsional wave sensor for high accuracy in harsh environments, and SIL 2 certification Prairieville, LA (May 26, 2009) - K-TEK, a leading manufacturer of state-of-the-art instrumentation for level, pressure, and temperature measurement, today announced that the AccuTrak AT100 and AccuTrak AT200 high accuracy, magnetostrictive liquid...

Read More »
Piston-Operated Gage offers DP transmitter option.
Pressure Transmitters

Piston-Operated Gage offers DP transmitter option.

Model 220 is available with loop-powered, 828 Vdc, 2-wire, 4-20 mA transmitter option. CSA-, UL-, and ATEX-rated sensor comes in explosion-proof housing, and transmitter with terminal strip comes in heavy-duty, cast aluminum housing. While accuracy is ±2% from 20-100% of FS, indicator accuracy, independent of transmitter, is also ±2%. Safe working pressure is 4,000 psig, and...

Read More »
Pressure Transmitter features compact, rugged design.
Pressure Transmitters

Pressure Transmitter features compact, rugged design.

Designed for commercial air-conditioning and refrigeration systems, AC-1 pressure transmitter comes with hermetically-welded, dry thin film measuring cell that does not require use of soft sealing materials that may deteriorate and leak over time. With stainless steel construction, product monitors pressure in larger industrial refrigeration and HVAC systems.

Read More »
FCI ST51 Mass Flow Meter Designed for Coal Mine Methane Gas Measurement
Flow Transmitters

FCI ST51 Mass Flow Meter Designed for Coal Mine Methane Gas Measurement

San Marcos, CA-May 27, 2009-Mine engineers and operators seeking to recover coal mine methane as a fuel resource and to reduce the effects of dangerous greenhouse gases will find the ST51 Mass Flow Meter from Fluid Components International provides excellent measurement accuracy in an explosion-proof instrument that's safe, simple to install, requires almost no maintenance and that offers an...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics