Transmitter suits temperatures from 0 to 100°C.
Temperature Transmitters

Transmitter suits temperatures from 0 to 100°C.

Model TH with HART® communication protocol can be configured with HART Communicator or PC and HART modem. Product allows thermocouple and RTD sensors to be integrated with systems and equipment utilizing HART communication protocol. Available for new and retrofit applications, transmitter offers accuracy of ±0.01 FRI and ±0.07% of reading. It enables full, digitized...

Read More »
Ultrasonic Level Transmitter has effective distance of 0.16-4 ft.
Level Transmitters

Ultrasonic Level Transmitter has effective distance of 0.16-4 ft.

General-purpose, 2-wire LU05 MicroSpan(TM), with miniature deadband, optimizes filling capacity of small, atmospheric process vessels. Product includes fail-safe intelligence with diagnostic feedback and digital infinity surface mapping. Accuracy is ±0.15% of span. Enclosure is rated NEMA 6X/IP67 and unit includes Kynar® transducer. Transmitter is spanned using calibration wire, dc...

Read More »
Logging Compass Probe transmits tilt measurements.
Position Sensors / Detectors / Transducers

Logging Compass Probe transmits tilt measurements.

EZ-COMPASS-PROBE offers 3 axes and tilt and temperature compensation. Magnetometer compass measures 8.3 in. and has 1.25 in. diameter. Waterproof probe transmits heading, pitch, roll, magnetic field, and temperature over RS232 or RS422 ports. Compass measures tilt angles up to ±75 arc-deg and includes hard and soft iron calibrations. Applications include directional rock drilling, antenna...

Read More »
Panel Meters/Transmitter provide loop-powered metering solution.
Miscellaneous Meters

Panel Meters/Transmitter provide loop-powered metering solution.

Models AL-213 and AL-512 use 4-20 mA linear scalable input to display any unit of measure, while Model AP-560 monitors AC voltage. All have operating temperature of 0-50°C at 35-85% RH. Model TZ-41 DIN rail mounted transmitter keeps data signal conditioned. It includes input ranges of 0-5 mA, 0-20 mA or 4-20 mA with 1:1 input to output ratio. Outputs are 0-5 V or 1-5 V. Displays and...

Read More »
Position Transmitters

Laser Transmitter achieves alignment to 0.0001 in.

Cylindrical Model CLS-100, with precision, brass housing, provides visible, red laser beam for digital readout receiver. Laser can be inserted into lathe, precision bores, and custom mounting fixtures. It measures machinery straightness, flatness, parallelism, and squareness over distances up to 60 ft. Measuring 1 in. in diameter and 6Â-½ in. long, unit can be plated for wear resistance and...

Read More »
Sensor/Transmitter is self cleaning.
Gas and Chemical Sensors / Detectors

Sensor/Transmitter is self cleaning.

ZÃ-ƒÃ‚¼llig dissolved oxygen system reduces cleaning and calibration frequency in harsh wastewater treatment environments. Solid-state, galvanic sensor has 2 insulated electrodes that are continuously polished by rotating, diamond grindstone. Self-cleaning process eliminates manual cleaning and replacing of membranes and replenishing of electrolyte solution.

Read More »
Level Transmitter employs SMT electronics.
Level Transmitters

Level Transmitter employs SMT electronics.

Smart 2 Model L4620 provides 4-20 mA analog signal as well as digital FSK communications signal on same 2-wire signal loop. Based on RF impedance level sensing technology, transmitter provides level control of most non-coating water- or organic-based liquids and light bulk solids. One-piece unit is comprised of electronics and inert sensing probe. Configuration and calibration can be performed...

Read More »
Transmitter uses guided-wave radar level technology.
Level Transmitters

Transmitter uses guided-wave radar level technology.

With one-tank penetration, Rosemount 3300 transmitter series offers multivariable output to provide top-level and interface-level variables from one, 2-wire device. Utilizing Time Domain Reflectometry, unit sends microwave pulses down probe and receives reflected signals. Reflected signals determine distance to top and interface level. Automatic Gain Control signal processing automatically adjust...

Read More »
Level Measurement System provides accuracy to 1.0%.
Load Cells

Level Measurement System provides accuracy to 1.0%.

Load cell based system combines EconoMount(TM) Load Cell Modules with PS-2010W Transmitters, resulting in non-intrusive method level measurement. Non-penetrating measurement system eliminates risk of product contamination while providing accurate, repeatable readings. Level measurement system requires live load cell modules at 1 or 2 measurement points. Remaining points are supported by simulated...

Read More »
Pressure Transmitter measures low pressure.
Pressure Transmitters

Pressure Transmitter measures low pressure.

Series CTU7000 offers long-term stability in pressure ranges from 0-0.15 to 0-100 psi. Unit has 0.86 in. diameter stainless steel housing and utilizes piezoresistive silicon pressure sensor. Output signals include 0.5-4.5 V, 4-20 mA, 1-6 V, and 0-5 V, with typical linearity of 0.2%. Transmitter is used for non-corrosive air and dry gases in applications including filter-monitoring, blow molding...

Read More »

All Topics