Transformers

Printed Circuit Power Transformer is suited for world market.
Transformers

Printed Circuit Power Transformer is suited for world market.

SPW-3500 Series incorporates independently isolated winding, lead breakout isolation tapes, and epoxy resin impregnation. Dual winding primaries and secondaries offer input voltages of 115/230 V, 50/60 Hz and output voltages from 5.0 to 120 Vac at 6.0 VA. UL 94V0 split-section bobbin and shroud assembly meets creepage and clearance minimums found in world markets. HIPOT rating from primaries to...

Read More »
Power Transformers suit 24 V primary applications.
Transformers

Power Transformers suit 24 V primary applications.

With 3-flange bobbin design, pin-out configuration, and Class B insulation system, transformers accept aqueous and solvent cleaning systems. Low profile models (SLP-24-050 through SLP-24-300 series) include 2.5, 6.0, 9.0, and 12.0 VA units with 1,500 Vac HIPOT rating primaries to secondaries. Standard profile models (SLP-24-350 through SLP-24-600 series) offer units ranging from 1.1 up to 12.0 VA...

Read More »
Current Sense Transformers feature low-seated profile.
Transformers

Current Sense Transformers feature low-seated profile.

CT319 and CT320 surface mount transformers measure 0.160 and 0.394 in. above circuit board, respectively, and operate over temperature range of 55-155°C. CT319 senses current output changes to provide feedback for overload detection, emergency shut-down, and power regulation. It performs at frequencies of 100 kHz and above with inductance of 100-11000 H, and resistance of 0.50-27.50 ohms....

Read More »
Transducer provides interface to process controllers.
Electrical Sensors / Detectors / Transducers

Transducer provides interface to process controllers.

EU2B5303 Current to Voltage Transducer converts primary current (up to 200 A, 50-400 Hz) to programmable 0-10 Vac control of instrument voltage. It isolates current to be measured from monitoring or control systems and provides interface to process controllers, alarms, and data acquisition systems such as PLCs. Toroidally wound transformer has 0.7 in. ID and 2 in. OD. It is coated with Bicroflex...

Read More »
Isolation Transformers clean up ac power lines.
Transformers

Isolation Transformers clean up ac power lines.

Lightweight SRT transformers filter out line noise and spikes, transforming noisy commercial ac power into safe, clean electrical current. They use Faraday Shield between primary and secondary windings to provide true line isolation. Three models are available, all rated for 120 Vac at 60 Hz on both input and output. They support loads up to 2.1, 4.1, or 8.3 A, weigh 13, 21, or 25 pounds, and...

Read More »
Transformers

Center Tap Transformer drives loads up to 7,500 Vrms.

Series 4260-1250 Hi-Voltage Transformer offers primary-to-secondary isolation of up to 18 kVdc. Center tapped secondary is used for creating both positive and negative outputs. Transformer is reliable in unstable or harsh environments. It meets or exceeds performance, safety, and quality standards of US, European, and Asian specifications. Application-specific device can be custom configured to...

Read More »
Voltage Transformers suit extreme isolation applications.
Transformers

Voltage Transformers suit extreme isolation applications.

High Isolation Voltage Transformers, including RF transformers and inductors, gate drivers, unipolar and bipolar transformers, are engineered for corona inception/extinction voltages up to 20,000 Vrms @ 60 Hz and AC HiPot tested at voltages to 40,000 Vrms @ 60 Hz up to 1 min. Applications include medical, industrial control, and high-efficiency power supplies.

Read More »
Pulse Transformer meets Mil specs.
Transformers

Pulse Transformer meets Mil specs.

Surface mounted MMT-3000 Series 1553 pulse transformer has operating temperature of -55 to +130?C, complying with MIL-PRF-21038 and MIL-PRF-21038/27 requirements. It is compatible with all 1553 drivers, receivers, and transceivers, and is available in 5, 12, and 15 V turns-ratios. Low profile device is 0.260 in. high.

Read More »
Surface Mount Transformer has small footprint.
Transformers

Surface Mount Transformer has small footprint.

Miniature low profile MLP-2000 Series SMT transformer is 0.185 in. high and takes up 70% less space than company's previous models. It has operating temperature of -55 to +105°C, and is available in 5, 12, and 15 V turns-ratios. Transformer meets MIL-STD-1553 specs and is compatible with all 1553 drivers, receivers, and transceivers.

Read More »
Control Transformers work with relays and solenoids.
Transformers

Control Transformers work with relays and solenoids.

CPT series has 240/480 Vac and 50/60 Hz primary voltage, and 120 Vac secondary voltage. Transformers maximize inrush capability and output voltage regulation when electromagnetic devices are used. Made of Mylar, Nomex, and other materials, they electrically insulate turn-to-turn windings, layer-to-layer windings, primary-to-secondary windings, and ground. Transformers are vacuum impregnated with...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers