Transformers

Converters provide digital control of analog servo systems.
Electronic Converters

Converters provide digital control of analog servo systems.

Solid State Synchro Control Transformers have standard accuracies of ±6, ±15 or ±30 minutes of arc. They simultaneously accept synchro or resolver inputs of 11.8 or 90 V, 400 Hz or 90 V, 60 Hz, and 14, 12, or 10 Bit binary digital data. Output voltage is sine of the difference between 2 input angles. Output angle range is ±7° or ±12.5°, and operating...

Read More »
Voltage Transformers suit extreme isolation applications.
Transformers

Voltage Transformers suit extreme isolation applications.

High Isolation Voltage Transformers are engineered for BIL ratings up to 60 kV and for corona inception/extinction voltages up to 20,000 Vrms at 60 Hz. They are AC HiPot tested at voltages to 40,000 Vrms at 60 Hz up to 1 minute. Specifications eliminate chance of product insulation system defects that could lead to catastrophic failure. Units are suited for medical, industrial control, and high...

Read More »
Toroidal Transformers offer power ratings from 20-1,000 VA.
Transformers

Toroidal Transformers offer power ratings from 20-1,000 VA.

Certified to UL, CSA, EN, and IEC standards with CE marking, CUSTARD (CUSTom/standARD) general-purpose transformers are based on power ratings from 20-1,000 VA. They incorporate standard primary windings for 117 V/230 V, 50-60 Hz operation and any secondary winding specified by end user. Applications include use as motor drives, step-down transformers, and power supplies. Models for medical...

Read More »
Dual Data Bus Transformers suit military applications.
Transformers

Dual Data Bus Transformers suit military applications.

Designed for high-density electronic equipment, low-profile Series 4256-1003 features 0.155 in. tall surface mount package. Minimum input impedance is 4,000 or 7,200 Ohms over full temperature range of -55 to +130°C. Fully encapsulated units support Mil-Std 981, Class S applications, as well as Mil-Std-1553 A/B and MAC AIR Specifications A3818, A5232, and A45690. They offer 10 standard...

Read More »
Transformers

Modular Substations offer solution for custom needs.

Able to reduce on-site field installation time by up to 75%, pad-mounted modular substations are suited for sites with limited time and manpower. Components and equipment are pre-assembled on structural base and shipped ready for installation and energization. With aesthetically pleasing low profile, transformers are suited for urban and remote locations, including residential, industrial, and...

Read More »
Switchmode Transformer suits AC-DC converter applications.
Transformers

Switchmode Transformer suits AC-DC converter applications.

Model SPP-3002 printed circuit mount transformer is designed for use with TNY255 TinySwitch(TM) integrated offline switching power supply chip from Power Integrations, Inc. Other applications include those requiring inputs of 85-265 Vac, 2 dc outputs ranging from 6.0-12.0 Vdc, and 1 dc output ranging from 12-24 Vdc at power of 2.0 W max. Dielectric strength is rated at 4,000 Vrms. Dimensions are...

Read More »
Flyback Controller operates at 250 kHz constant frequency.
Transformers

Flyback Controller operates at 250 kHz constant frequency.

Model LTC3806 synchronously drives primary and secondary side MOSFETs. It facilitates cross regulation in multiple output power supplies by keeping MOSFETs ON and outputs coupled for larger fraction of each power conversion cycle. Unit incorporates all timing and control functions, as well as 1 A gate drivers for designing multiple output power supply at up to 60 W. Adjustable soft-start controls...

Read More »
Data Bus Transformer supports high-speed data transmission.
Transformers

Data Bus Transformer supports high-speed data transmission.

Data Bus Interface Transformer series 4260-1646 and 4260-1647 suit critical industrial and military applications. They offer 3,000 Ohm min input impedance, 7,200 Ohm over -55 to +130°C temperature range; 75 KHz to 1 MHz no-load frequency range; 1 V max overshoot; common mode rejection at 45 dB min; and less than 20% droop. With standard turns ratios from 1:1 to 3.2:1, they are available in...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers