New Transceivers Products

Wireless System transmits and receives data in real-time.

Utilizing license free 902-928 MHz ISM band with spread spectrum frequency hopping technology, DIN rail mounted wireless system ensures interference-free link for real-time data monitoring and transmission. Transmitter and receiver units are DIN rail mountable or can be installed in enclosures. Suited for industrial areas, unit has 3,000 ft range with no line of sight and 1 mW to 1 W transmit...

Transceiver enables communication between wireless devices.

USB On-The-Go (OTG) transceiver chip MIC2555 enables point-to-point communications between USB-enabled appliances without use of PC. Chip performs as PHY for USB OTG serial interfaces and is compatible with various stand-alone microprocessors, ASICs and COT designs, OTG IP cores, and application-specific standard products. Offered in 4 x 4 mm MLF(TM) packaging, IC is compliant with USB 2.0 and...

Software Radio Transceiver offers XMC switched-fabric I/O.

Suited for connection to communication system IF or RF ports, Model 7140 PMC module combines transmit and receive capabilities with Virtex II-Pro FPGA. It supports VITA 42 XMC standard with optional switched-fabric interfaces for I/O. Available form factors include PCI, 3U, and 6U cPCI in addition to PMC conduction-cooled version. Clock/sync bus allows synchronization of local oscillator phase,...

Electrical Transceiver complies with SFP industry standard.

Model SFP-155E delivers full duplex STM-1 electrical SDH transport over coaxial cables at 155 Mbit/s and is fully interchangeable with STM-1 optical SFP modules. Electrical interface is compliant with telecom ITU-T G.703 recommendations and can be connected using standard DIN 1.0/2.3 75-ohm cable connectors. Hot-pluggable transceiver is suited for SDH add/drop multiplexers, optical edge devices,...

The Benefits of Polymer Coatings in Tribology

This white paper provides an in-depth review of how polymer coatings are beneficial in tribology.

Transceivers offer ESD protection up to -

Series SP3070 includes nine 3 V RS485 transceivers with typical power consumption of 150 nW in shutdown mode. Six models have slew rate limited outputs for operation on long or uncontrolled data buses. Three units offer data rates up to 16 Mbps for high-speed signaling. All include failsafe protection, internal current limit, and automatic thermal shutdown. Control inputs are hot-swap protected...

Integrated Transceiver IC enables operation of 10 handsets.

Manufactured using proprietary SiGe BiCMOS process, 2.4 GHz transceiver IC ATR2806 offers full data transmit bit rate of 1.152 Mbps and max sensitivity of -99 dBm for coverage of distances up to 300 m. It is suited for digital cordless telephone and wireless data applications and also provides digital receive signal. IC includes low-noise amplifier, image rejection mixer, low-IF filter,...

Converter Pair acts as data transceiver.

LTX-5510 Electrical/Optical - Optical/Electrical converter pair digitizes analog input signal to 12 bit precision, along with 4 auxiliary digital inputs, and transmits data over Gbit fiber optic link. LTX-5510R receives transmitted data and reconstructs 5 signals at far end of link. Transmitter has selectable input ranges, Ã-

LIN Physical Interface suits automotive applications.

Stand-alone, local interconnect network transceiver, Model TPIC1021, features ESD protection up to 17 kV IEC and 12 kV HBM. It survives ISO 7637 transients and has fault protection to handle 40 V to 40 V on LIN bus. Unit functions across LIN 2.0 specified data rate up to 20.0 kBit/sec and functions equally well at lower data rates recommended by SAE J2602. To maximize EMI, receiver's input filter...

Transceiver supports time-triggered applications.

Operating as interface between FlexRay or TTP communication controller and copper-wire physical bus, Model AS8221 provides bus and failure diagnostics and operates at baud rates up to 10 Mbit/sec. Bi-directional serial host interface sets low-power operation modes and requests diagnostic status. Output drivers are short-circuit protected against +/- supply voltage. Unit is suited for high-speed...

Fiber Optic Data Transceivers suit networking applications.

Series 485 transmits and receives one RS485 signal over single optical fiber, while Series 487 transmits and receives two RS485 signals over single optical fiber. Units can be configured for either 2- or 4-wire operation with flip of switch. As part of product operation, transceivers can be biased or non-biased and terminated or not by selectable dip switches. Diagnostic indicators are provided...

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.