Transceivers

Wi-Fi Dual Band USB Module targets USB wireless embedded systems.

Embedded with MediaTek MT7612U chipset, WUBM-273ACN 802.11ac/b/g/n dual-band (2.4/5 GHz) USB Wi-Fi-® module supports 2T2R (2-stream) MIMO technology and delivers wireless PHY data at rates to 867 Mbps. This 55.0 x 25 x 3.3 mm USB 3.0 unit, backwards compatible with USB 2.0, features USB Type A or 12-pin wafer connector and is available with 2 x U.FL connectors or printing antenna. Along with...

Read More »

Physical Layer Devices offer 40/50 Gbps transmission rates.

Based on 4-level pulse amplitude modulation (PAM) technology, 28 nm Models BCM82040 and BCM82004 enable transmission rates of 40/50 Gbps serially over multiple physical media, including direct attach cables and optical fiber. PAM-4 enables transmission of 40 Gbps at baud rate of 20 Gbaud. Housed in 7 x 7 mm package, both devices can transmit and receive data over 2 pairs of media versus 8 pairs...

Read More »

Copper Gigabit PHYs support 2.5G and 5G Ethernet.

Designed in 28- nm process technology, BCM8486X Series is available in single-port and quad-port packages, and addresses both switching and access point markets. Units are based on 10GBASE-T architecture and offer coding strength of 10G at 2.5G and 5G speeds, resulting in optimized alien noise rejection and cable reach of more than 100 m over existing Cat5e and Cat6 cables. PHYs also deliver...

Read More »

TiaLinx, Inc. Announces the Launch of Its 32x32 Planar Antenna Array with Polarized Beamforming Capability at the V-band

IRVINE, Calif., -- TiaLinx, Inc., a developer of remotely controlled, small, unmanned aerial and ground-based sensor systems, announced the launch of its new V-band ultra-narrow beam radio frequency module. The Viper60-C is a highly integrated transmitter and receiver module. Integrated with the 1024-element planar antenna arrays, the right-hand circularly polarized (RHCP) and the left-hand...

Read More »

VadaTech Selected for Airborne RADAR Signal Processing and Data Recording Application

A military prime contractor in the USA has chosen MicroTCA for its airborne RADAR application. The system combines the functionality of A/D D/A Conversion, data processing, and storage in two rugged 1U rackmount systems. Both the transceiver system and the storage system utilize the same rugged chassis, but with vastly different payloads. The customer required a high-performance, compact, rugged...

Read More »

Optowiz Plans to Release High-Density 96-CH HD-SFP CWDM BiDi As Fiber Multiplier Transceivers for Existing Fiber-Optic Telecom and Datacom Service Providers

LOS ANGELES- – Optowiz announced imminent availability of high density bi-directional (BiDi) HD-SFP in six wavelengths (6WL) SFP transceivers at the data transmission speed of up to 6.1Gbps over a one core single-mode fiber.-  Making this high density SFP available in the North American markets, Optowiz, based in Korea, is starting its marketing campaign with its USA partner based in Brea,...

Read More »
Dual Wideband Transceiver is available in FMC format.

Dual Wideband Transceiver is available in FMC format.

Suited for LTE, SDR, and other RF applications, FMC214 comes in FPGA Mezzanine Card (FMC) format, has 70 MHz to 6 GHz range, and utilizes- 8 SSMC connectors for I/O. TDD- and FDD-compatible board combines RF front end, frequency synthesizers for Rx and Tx, mixed-signal baseband section, and- digital interface to host processor through LPC connector. Instantaneous bandwidth is programmable from...

Read More »
Radio Transceiver Module operates reliably in 2.4 GHZ band.

Radio Transceiver Module operates reliably in 2.4 GHZ band.

Designed to be embedded into OEM equipment, 40 x 29 x 5.5 mm Circuit Design STD-503 wireless transceiver ensures reliable radio communication by using noise-resistant, direct-sequence spread spectrum (DSSS) modulation. This improves transmission speed and provides diversity receiver function for preventing signal drop-out due to multi-path fading — accomplished via inclusion of- two antennas...

Read More »

Perle Releases SFP and XFP Optical Transceivers

Perle Systems, a global manufacturer of advanced Ethernet over Fiber and secure device networking hardware, adds SFP and XFP Optical Transceivers to its product portfolio. These hot-swappable, compact media connectors provide instant fiber connectivity to networking gear like Media Converters, Switches and Routers. They are a cost effective way to connect a single network device to a wide variety...

Read More »

Fail-Safe CAN Transceivers serve automotive, industrial markets.

Offered in SO8 and DFN8 packages with wet-able flanks for automated optical solder inspection, ATA6560/61 CAN transceivers provide interface between CAN protocol controller and physical 2-wire CAN bus and support CAN FD (flexible data rate) standard with data rates up to 5 Mbps. Both devices deliver ideal passive behavior to CAN bus when supply voltage is off. While ATA6560 offers Silent Mode...

Read More »

All Topics