Transceivers

Transceivers

TiaLinx, Inc. Announces the Launch of Its 32x32 Planar Antenna Array with Polarized Beamforming Capability at the V-band

IRVINE, Calif., -- TiaLinx, Inc., a developer of remotely controlled, small, unmanned aerial and ground-based sensor systems, announced the launch of its new V-band ultra-narrow beam radio frequency module. The Viper60-C is a highly integrated transmitter and receiver module. Integrated with the 1024-element planar antenna arrays, the right-hand circularly polarized (RHCP) and the left-hand...

Read More »
Signal Processors

VadaTech Selected for Airborne RADAR Signal Processing and Data Recording Application

A military prime contractor in the USA has chosen MicroTCA for its airborne RADAR application. The system combines the functionality of A/D D/A Conversion, data processing, and storage in two rugged 1U rackmount systems. Both the transceiver" system and the "storage" system utilize the same rugged chassis, but with vastly different payloads. The customer required a high-performance, compact,...

Read More »
Transceivers

Optowiz Plans to Release High-Density 96-CH HD-SFP CWDM BiDi As Fiber Multiplier Transceivers for Existing Fiber-Optic Telecom and Datacom Service Providers

LOS ANGELESÂ- – Optowiz announced imminent availability of high density bi-directional (BiDi) HD-SFP in six wavelengths (6WL) SFP transceivers at the data transmission speed of up to 6.1Gbps over a one core single-mode fiber.  Making this high density SFP available in the North American markets, Optowiz, based in Korea, is starting its marketing campaign with its USA partner based...

Read More »
Dual Wideband Transceiver is available in FMC format.
Transceivers

Dual Wideband Transceiver is available in FMC format.

Suited for LTE, SDR, and other RF applications, FMC214 comes in FPGA Mezzanine Card (FMC) format, has 70 MHz to 6 GHz range, and utilizesÂ- 8 SSMC connectors for I/O. TDD- and FDD-compatible board combines RF front end, frequency synthesizers for Rx and Tx, mixed-signal baseband section, and digital interface to host processor through LPC connector. Instantaneous bandwidth is...

Read More »
Radio Transceiver Module operates reliably in 2.4 GHZ band.
Radios

Radio Transceiver Module operates reliably in 2.4 GHZ band.

Designed to be embedded into OEM equipment, 40 x 29 x 5.5 mm Circuit Design STD-503 wireless transceiver ensures reliable radio communication by using noise-resistant, direct-sequence spread spectrum (DSSS) modulation. This improves transmission speed and provides diversity receiver function for preventing signal drop-out due to multi-path fading — accomplished via inclusion ofÂ- two...

Read More »
Transceivers

Perle Releases SFP and XFP Optical Transceivers

Perle Systems, a global manufacturer of advanced Ethernet over Fiber and secure device networking hardware, adds SFP and XFP Optical Transceivers to its product portfolio. These hot-swappable, compact media connectors provide instant fiber connectivity to networking gear like Media Converters, Switches and Routers. They are a cost effective way to connect a single network device to a wide variety...

Read More »
Transceivers

Fail-Safe CAN Transceivers serve automotive, industrial markets.

Offered in SO8 and DFN8 packages with wet-able flanks for automated optical solder inspection, ATA6560/61 CAN transceivers provide interface between CAN protocol controller and physical 2-wire CAN bus and support CAN FD (flexible data rate) standard with data rates up to 5 Mbps. Both devices deliver ideal passive behavior to CAN bus when supply voltage is off. While ATA6560 offers Silent Mode...

Read More »
Transceivers

LIN Transceiver is designed for in-vehicle networking.

Along with +3.3 V/5 V/85 mA LDO with 2.3 V min supply suitable for use with multilayer ceramic capacitors, ATA6632/33/34 features 130 Â-µA linear mode current to support data storage even during unexpected shut down. Products comply with LIN 2.0/2.1/2.2/2.2A and SAEJ2602-2, and certain models also include such application-specific functions such as relay drivers, watchdog, high-side...

Read More »
Miscellaneous Controllers

Wireless Transceivers target smart metering applications.

Offering simultaneous operation at sub-1GHz and 2.4GHz, Model AT86RF215 is compliant to IEEE 802.15.4g-2012 and ETSI TS 102 887-1. Unit supports variety of data rates with 3 modulation schemes: multi-rate and multi-regional frequency shift keying, orthogonal frequency division multiplexing, and offset quadrature phase-shift keying. AT86RF215M single band sub-1GHz transceiver and AT86RF215IQ...

Read More »
Transceiver SoCs drive Internet of Things connectivity.
Transceivers

Transceiver SoCs drive Internet of Things connectivity.

Supplied in QFN-40 RoHS-compliant packages, NCS3651x series incorporates 32-bit ARM® Cortex®-M3 processor as well as various configurations of RAM for data storage and FLASH memory for program storage. These 2.4 GHz ULP wireless transceivers feature single supply operation from 1.0–3.6 V battery and are based on IEEE 802.15.4-2006 standard, which support such protocols as ZigBee,...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics