Tools

MSC Industrial Direct Co. to Showcase Hertel Cutting Tools at IMTS 2010
End Mills

MSC Industrial Direct Co. to Showcase Hertel Cutting Tools at IMTS 2010

Melville, New York, August 12, 2010 - At IMTS 2010 in booth W-1464, MSC Industrial Direct Co., Inc. will showcase a variety of products from Hertel, a provider of cutting tools since 1947. Hertel is currently launching a major product expansion that includes the addition of over 5,500 solid holemaking, threading and milling tools, as well as indexable carbide products. Hertel offers a full line...

Read More »
Wafer Handler improves microelectronics industry yield.
Inspection Equipment

Wafer Handler improves microelectronics industry yield.

In addition to offering 360° rotation for full macro examination of wafer's back surface and edges, AL120(TM) can transfer 100-200 mm dia wafers with thicknesses down to 90 Â-µm to meet demands of thin-wafer manufacturing. Recipe-driven tool can be programmed for different configurations, while pushbutton recipe selection allows operator to load different products instantly. System can...

Read More »
Transmission Refill Kit includes 10 adapters for flexibility.

Transmission Refill Kit includes 10 adapters for flexibility.

Supplied with 10 adapters that fit Ford, BMW, Honda, Nissan, VW, Audi, and Mercedes transmissions, MVA7216 ATF Refill Kit converts MV7201 Fluid Evacuator Plus into system for refilling or topping off sealed automatic transmissions. Refill hose connects directly to vacuum/pressure port on MV7201, quick-change coupler accelerates adapter changes, and brass ball valve controls fluid flow. When...

Read More »
Applicator / Finishing / Cleaning Brushes

Brush-Based System increases railroad switch heater efficacy.

Protecting railroad switches from debilitating effects of snow and ice, SnowProtec(TM) consists of brushes with filaments facing up and down - angled from top of rail ties on outside to top of rail along switch tongue's movable part. Brush provides protection against snow drifting while making switch-heater more effective and efficient by enhancing retention of heat from pre-warmed switches. Due...

Read More »
Compression Tool terminates F, BNC, and RCA connectors.
Tools

Compression Tool terminates F, BNC, and RCA connectors.

Featuring universal head, SealSmart II Compression Tool, Model 16220C, is designed to work with all standard compression connectors available, including right-angle and RGB Mini. Tool supports coax cable sizes RG6 Quad, RG6, RG59, RGB/Mini, 59, 23, 24, and 25 AWG. It is suited for CCTV, digital satellite systems, CATV, residential and commercial structured wiring, security installations, and home...

Read More »
Cordless Rotary Hammer features shock-absorbent D handle.
Electric Hammers

Cordless Rotary Hammer features shock-absorbent D handle.

Powered by 18 V LXT Li-Ion Battery Technology, Model BHR241 features variable speed motor that delivers 1-1,000 rpm and 0-4,000 bpm. Three-mode operation allows for rotation only, hammering with rotation, or hammering only. Providing 7/8 in. capacity in concrete and Â-½ in. capacity in steel, tool has chisel that rotates 360° with 40 locking positions, built-in clutch that minimizes...

Read More »
Bolt / Rebar Cutters and Cutting Machinery

Stainless Steel Direct Offers a Variety of Hand Tools to Make Your Project go a Little Easier

Stainless Steel Direct carries one of the largest selections of stainless steel products in the marketplace. Sometimes your project requires purchasing some simple tools to make your project go a little easier. Stainless Steel Direct offers a variety of hand tools such as Bench Swagers, Bolt and Chain Cutters, Hand Swager, Raileasy Wire Rope Cutters, Rivet Nut Installation Tool and a variety of...

Read More »
Ratcheting Wrench Set offers 8 settings between 2 tools.
Tools

Ratcheting Wrench Set offers 8 settings between 2 tools.

Intended for tradesmen and do-it-yourselfers, 4-in-1 Ratcheting Wrench Set does work of 8 combination wrenches or sockets with 2 tools. Both wrenches have 4 different sizes built into each. While 12-point sockets maximize points of contact, one-handed operation facilitates and accelerates tightening/loosening of nuts and bolts. All wrenches are heat-treated and have electronic coating for rust...

Read More »
Wire Termination Tool handles all standard brands of jacks.
Wire Strippers

Wire Termination Tool handles all standard brands of jacks.

Capable of terminating 90° and 180° jacks, as well as single row pairings, JackAX(TM) ensures 110 jacks are properly terminated eliminating common NEXT and FEXT failures. It utilizes standard 110 blade weighing only 10.9 oz, and can be used in applications inside walls and junction boxes. Product is available as tool only, with 110 EZ-Data blade, or with standard 110 PDT blade.

Read More »
Welding End Prep Tool Pulls Thick Chip On Stainless Steel
Tools

Welding End Prep Tool Pulls Thick Chip On Stainless Steel

A portable welding end prep tool that performs multi-angle end preps and squares-off heavy wall stainless steel and other hard alloys without work hardening is available from ESCO Tool of Holliston, Massachusetts. The Esco MILLHOG Mini Series welding end prep tool rigidly mounts to the tube or pipe I.D. and features the EscoLock® wedge-lock blade lock system and a cutter blade that gets...

Read More »

All Topics