Tools

Tools

Fillet Weld Grinder finishes variety of metals.

Weighing 6.6 lb and equipped with Marathon motor, extended nose Model KNSE 12-150 is suitable for finishing and polishing hard-to-access fillet welds typically found on handrails or inside welds or enclosed areas. Unit features double gear reduction, winding protection grid, auto-stop carbon brushes, and thumbwheel for speed preselect. With Vario Tacho Constamatic full-wave electronic speed...

Read More »
Electronic Torque Wrenches feature fixed ratcheting head.
Tools

Electronic Torque Wrenches feature fixed ratcheting head.

Able to accept standard Proto sockets, Fixed Ratcheting Head Torque Wrenches come in Â-¼, 3/8, and ½ in. drive versions with torque ranges from 25-250 lb-ft and are accurate to within ±2% of indicated value in both directions over 10%-100% FS range. Fixed ratcheting head has 24-tooth design with 15° arc swing, alloy steel drive gear, and reversing lever design. Along with...

Read More »
Electric Hammers

Combination Hammer suits drilling and demolition applications.

Equipped with 15 A motor, Model KHE 76 provides rotational torque of 796 lb-in., max impact rate of 2,735 blows/min, and variable impact energy from 1-16 joules/blow. Vario-Tacho-Constamatic electronic speed control enables tool to maintain virtually constant rate of impact and speed between no-load and load. For added precision, chisel can be fixed in 12 positions. Impact reduction setting...

Read More »
Milwaukee Introduces Industry's Fastest ProPEX Installation Tools
Tools

Milwaukee Introduces Industry's Fastest ProPEX Installation Tools

MILWAUKEE, WI - Milwaukee Electric Tool Corporation expands their M12(TM) and M18(TM) Lithium-Ion systems with the introduction of the industry's fastest ProPEX installation tools with auto-rotating ProPEX Expansion Heads. Designed for easy one-handed use, the M12(TM) and M18(TM) ProPEX Expansion tools allow users to install Uponor ProPEX® fittings up to four times faster, and are...

Read More »
Turning Tool Grade works with nickel-based super alloys.
Cutting Tool Inserts

Turning Tool Grade works with nickel-based super alloys.

Developed for finish turning of nickel-based super alloys, CBN 170 grade is optimized for toughness and wear-resistance that can help increase tool life and cutting speed. It incorporates whisker ceramic binder and satisfies surface finish, tolerance, and length of cut requirements found in finishing operations. Designed for continuous cutting applications, product can achieve depths of cut up to...

Read More »
Impact Wrenches deliver 500 lb-ft of max torque.
Tools

Impact Wrenches deliver 500 lb-ft of max torque.

Weighing 6.7 lb with 10 in. head length, 18 V Model IWTH180-01 features Â-½ in. friction ring for socket changes, while Model HTH181-01 has ½ in. detent-pin for positive accessory retention, and Model HTH182-01 includes 7/16 in. Quick Change for tool-less accessory removal. All-metal gear train drives each motor at 1,900 rpm with 2,100 imp for full range of fastening applications....

Read More »
Hot Air Knife Blow-Off Systems dry machined metal parts.
Refrigerated Air Dryer

Hot Air Knife Blow-Off Systems dry machined metal parts.

Malcom Hot Air Knife Systems dry machined metal, cast, or stamped parts. They can be configured with one or more hot air blowers, specialty deflectors, air nozzles, or tunnels, as well as various control options to blow air from ambient temperatures up to 1,000°F, at pressures up to 4.5 psi. Incorporating self-contained heat guns, systems fully dry metallic surfaces to prevent corrosion.

Read More »
Socket Bits are offered in molded plastic carrying case.
Miscellaneous Bits

Socket Bits are offered in molded plastic carrying case.

Available in molded plastic carrying cases, high performance socket bits feature proprietary ProGuard finish and are constructed to survive tough work environments. Protanium steel construction provides strength, and design allows bit to flex instead of break when high torque levels are applied. Range of inch and metric, chamfered hex, ballpoint, and star tipped tools are available.

Read More »
Tools

Power Tool LED Light attaches with Velcro strip.

Drillite(TM) compact power tool light can be used with drill motors, saws, power screwdrivers, rotary hammers, and other power tools. It attaches with Velcro strip, which is available in 6, 12, and 18 in. lengths. Permanent magnetic base can affix product to toolboxes and other metal surfaces and/or hold extra drill and screw bits, while rubber non-slip pad prevents tool damage. Adjustable LED...

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics