New Tools Products

Folding Tools feature lightweight, ergonomic design.

Constructed of extruded aluminum, KlenkÃ-® tools are capable of folding up to 24-gauge steel sheet metal and ductwork. Lightweight design facilitates manipulation and portability, while ergonomic shape with finger ridges maximizes grip. Sight holes enable accurate depth alignment for folds 3/8 and 1 in. deep. Single-piece aluminum tool has no spot-welds and is offered in 12, 18, and 24 in....

Orbital Sander finishes wide range of materials.

With 1/10 in. orbit size, 1.9 A Model SR 20-23 orbits 10,850 times/min. Plastic microcellular elastomer sanding plate ensures smooth, even finishing. Quick-change sandpaper system incorporates clamps for gripping and tensioning of sanding sheet, while sealed ball bearings and die-cast aluminum bearing flange prevent dust from entering mechanism. Weighing 4.5 lb, vibration-free 1/3-sheet sander is...

Bench Rammer delivers 760 blows per minute.

With bore size of 1 5/16 in. and 4 in. stroke, Model MP-241B features replaceable rubber butt and double-action sand wiper seal to exclude dirt and grit from inside tool. Aluminum backhead minimizes weight and operator fatigue, while hooked lever throttle maximizes operator comfort.

Connection System withstands severe service conditions.

Consisting of head and power unit in one-piece assembly, BURNDY WEJTAP(TM) uses power-driven, aluminum alloy wedge to lock tap cables into self-adjusting, C-shaped spring body, maintaining consistent pressure throughout life of connection. Wedge's wiping action, in combination with PENATROX(TM) PENA 13 oxide-inhibiting compound, provides contact integrity. Breech-loaded tool incorporates...

System Selection: Smart Hardware Choices Enable a Cascade of Value

This white paper outlines six questions to help OEMs and ISVs select the right hardware design to best support their purpose-driven application and product.

Microperforation Systems provide adjustable hole sizes.

VentPerf needling tools and systems are suited for micro-perforation and cutting of film, paper, foil, laminates, and non-wovens. Various designs provide ventilation, moisture release, or product expansion for agricultural and consumer good packaging as well as technical materials. Up to 600 holes/sq in. are attainable at speeds to 600 fpm. Products can be integrated into in-line processes, or...

Trim-Out Set provides portable solution for electricians.

Comprised of 6 pieces, trim-out set (Cat No. 80006) enables electricians to handle daily projects. It includes heavy-duty 2000 SeriesÃ-® 9 in. side-cutting pliers, Klein-KurveÃ-® wire stripper/cutter, and 4 in. round shank No. 2 ProfilatedÃ-® Phillips-tip screwdriver in addition to Ã-¼ in. cabinet-tip screwdriver with 4 in. heavy-duty round shank, and 4-pocket tool pouch. Set also...

Table Saw features table extension and storage.

Featuring 25Ã-½ x 30 in. table and no-load 3,950 rpm 15 A motor, 70 lb TS 250 Portable Table Saw features cutting depth of 3 1/8 in. at 90Ã-

Rotary Hammer features vibration absorbing grip.

Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and...

Impact Wrench features ergonomic design.

Covered in soft elastomer compound that absorbs vibration and provides slip-resistant grip, Ã-½ in. WR16SA is constructed with aluminum housing intertwined with injection molded inner nylon core. Armature bearing is seated in aluminum to withstand heat and stress resulting from extreme use. Weighing 6.17 lb, this 10.15 in. long tool uses 4.2 A, 480 W motor to produce up to 3,190 lb-in. torque...

Electric Breaker features fatigue-reducing design.

Designed for wall or floor applications, TE 706-AVR Breaker incorporates brushless SR-motor, active vibration reduction system, and 3-level hammering power regulation. Control electronics provide continuous motor power, even during voltage fluctuations, and air flows over areas of motor, electronics, and hammering mechanism to keep tool and casing cool. Self-sharpening polygon chisels are offered...