Tools

Ergonomic Cable and Bolt Cutters operate using 10.8 V battery.
Bolt / Rebar Cutters and Cutting Machinery

Ergonomic Cable and Bolt Cutters operate using 10.8 V battery.

Performing cuts in < 8 sec, micro cable and bolt cutters feature 350° rotating blade heads, auto-retract blade, and LED light. Ergonomics reduce injuries from extended use while improving cut quality. While ES32ML has capacity to cut 600 MCM copper and 750 MCM aluminum cable, ES32FML cuts 1 ¼ in. fine stranded copper cable. Along with threaded rod, rebar, steel rod, guy wire, and...

Read More »
Tools

Artis Tweezers from Aven: Exclusive Design Reduces Hand Fatigue and Enhances Productivity

The tweezer is one of the longest standing and most important staples of every work bench, and Aven’s innovative Artis Tweezers have set a new precedent for precision. The patent-pending design features an angled bend at the end of the tip, which provides a softer overall grip with a large surface area that greatly reduces hand fatigue while enhancing overall productivity and effectiveness. The...

Read More »
Termination System handles 110 type 4 pair keystone jacks.
Terminations

Termination System handles 110 type 4 pair keystone jacks.

To simplify keystone jack terminations, Xpress Jack™ seats and trims all 8 conductors in one smooth motion, eliminating need to punch down 8 times for single termination. Tool features heavy-duty all carbon tool steel construction with rust-resistant black oxide finish. Comfort grip TPR handles minimize hand stress on large jobs with prolonged use.

Read More »
Side-Cutting Pliers also incorporate wire stripper/crimper.
Rope / Cable / Wire Cutters and Cutting Machinery

Side-Cutting Pliers also incorporate wire stripper/crimper.

In addition to cutting and stripping 10–12 AWG solid and 12–14 AWG stranded wire, 9 in. Journeyman™ (Cat No. J2139NECRN) crimps non-insulated connectors, lugs, and terminals. High-leverage design with crimping die positioned behind hinge promotes cutting and gripping power, and cross-hatched knurled jaws areÂ- optimized for gripping. Along with induction-hardened cutting knives,...

Read More »
Hand Held Drills

Cordless Impact Tools deliver optimized torque values.

Offering electronic 3-speed power selection, 18 V LXT® Brushless Cordless Impact Tools includeÂ- XWT07M/Z ¾ in. square drive impact wrench, XWT08M/Z ½ in. square drive impact wrench, and XWT09T/Z 7/16 in. hex chuck impact drill. While XWT07M/Z delivers 780 lb-ft fastening torque and 1,250 lb-ft breakaway torque, respective values for XWT08M/Z are...

Read More »
Steel Turning Tool offers stable insert clamping.
Cutting Tool Inserts

Steel Turning Tool offers stable insert clamping.

Suited for longitudinal and face turning, CoroTurn® 300 uses iLock™ interface forÂ- stable insert clamping. System securely locks insert in place to prevent cutting forces from affecting tool position and provides tool accuracy within ±.002 in. Eight-edged inserts are available in grades GC4325 and GC4315 featuring Inveio™ coating, a uni-directional crystal orientation for...

Read More »
Lineman's Pliers are designed for ergonomics and efficacy.
Tools

Lineman's Pliers are designed for ergonomics and efficacy.

Sized to fit in tool belt or box, 6 in. (p/nÂ- 12206C) and 8.5 in. (p/n 12201C) Lineman's Pliers facilitate gripping, twisting, bending, and cutting of wire and cable. Both feature 2-tone (TPR) molded comfort grip handle as well as 6140CrV drop forged carbon alloy steel body with hardness level of 45 ±3 and blade hardness of 58-61. While both models also feature...

Read More »
Ceramic Inserts bolster performance in unstable conditions.
Cutting Tool Inserts

Ceramic Inserts bolster performance in unstable conditions.

Secomax™ CS100 sialon ceramic grade inserts with T-style edge, featuring free-cutting, sharp geometry,Â- deliver strength, stability, and longevity needed for machining of nickel-based superalloys in unstable conditions. Inserts are available in 20° chamfers ranging from .002–.004 in. wide, and sharp, negative reinforced cutting edges absorb cutting force and...

Read More »
Pipe Cleaning Equipment

RIDGID® Showcases Diagnostic, Locating and Drain Cleaning Innovations at WWETT Show

Booth visitors can enter to win one of six MR-10 Magnetic Locators in a show giveaway ELYRIA, OHIO – RIDGID®, a leading manufacturer of innovative tools and equipment for the professional trades, will highlight some of its most advanced solutions at the 2016 WWETT Show, February 17-20, in Indianapolis, Indiana. The RIDGID booth (#1247) will feature diagnostic, locating and drain cleaning...

Read More »
Chainmaille Pliers Kit optimizes user comfort and control.
Tools

Chainmaille Pliers Kit optimizes user comfort and control.

Used for creating and repairing chainmaille, Xuron® TK3700 Chainmaille Plier Kit combines Model 486 plier with 90° bent nose that lets user pick up jump rings without twisting wrists, Model 475 short nose plier for opening and closing jump rings, and Model 485FN flat nose plier for heavy wire and steel jump rings. Made from high carbon steel which is blackened to prevent glare, tools...

Read More »
Oilfield Improvements&reg; Wheeled Rod Guide&reg; Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics