Tools

Boiler Tube End Prep Tool fits into tight areas.
Tools

Boiler Tube End Prep Tool fits into tight areas.

Esco Mongoose MILLHOG® right angle drive ID clamping end prep tool utilizes push-pull clamp and release mechanism with attached wrenches to bevel tubes with 5/8 in. ID to 3 in. OD. Its 2/3 hp pneumatic motor generates cutting torque at the bit capable of machining stainless steel and alloyed tubing. Suitable for performing any angle of prep, tool includes dual opposed tapered roller...

Read More »
Tools

Tongs suit bending, forming, and seaming applications.

Fairmont Tongs, available in Straight and Offset versions, feature heavy-duty construction and are available with optional cushioned grips. Tongs produce uniform, precise bends in sheet steel and non-ferrous metals. Forged steel jaws and handles are zinc-plated. Jaws measure 3 in. wide and 1 1/8 in. deep and have bending marks that aid in making precise depth bends.

Read More »
Pneumatic Assembly Tool offers 3-in-1 operation.
Tools

Pneumatic Assembly Tool offers 3-in-1 operation.

Pneumatic Assembly Tool joins PEX plumbing connections, splices aircraft control cable and wire rope assemblies, and crimps electrical connectors. Powered by air pressure of 85-95 psi, unit adapts to different applications with variety of quick-change crimping jaws. Full safety, 2-finger trigger activation is easy to use with or without work gloves. Unit can be operated from left or right handed...

Read More »
Tools

Adapter Plate Kit simplifies engine removal.

EngineOut Kit helps remove engine from front engine/rear wheel vans. It comes in choice of Chevy, Chrysler, or one of 3 Ford Engine Plates. Adapter Plate bolts to front of engine where water pump has been removed. Hoist Arm installs in engine hoist and Angle Adjuster controls engine tilt. With engine held by front instead of top, user can easily lift and tilt engine as necessary for removal and...

Read More »
Pistol-Grip, 1/2 in. Drill drills large and small holes.
Hand Held Drills

Pistol-Grip, 1/2 in. Drill drills large and small holes.

Housed in ergonomic package, BE1020 provides 248 lb-in. torque and incorporates 2-speed gearbox, S-automatic safety clutch, and winding protection grid. It also features electronic carbon brush wear indicator and Vario-Tacho-Constimatic full-wave electronic speed control. Drilling capacity is 5/8 in. (steel) and 1 9/16 in. (softwood). Utilizing 8.2 A motor, product has no-load speeds rated at...

Read More »
Marking Stylus extends tool life with diamond tip.
Marking Equipment

Marking Stylus extends tool life with diamond tip.

Suited for 2D, pin, and peen marking systems, DiaMark(TM) diamond-tipped stylus is available in all diameters and lengths for any marking machine, and provides 100 times the service life of carbide tools. Standard diameters are up to 5/8 in. and standard lengths are up to 6 in. Applications include aerospace and defense, automotive, and medical industries, or anywhere permanent marking is...

Read More »
Cordless Impact Wrench is powered by 12 V batteries.
Tools

Cordless Impact Wrench is powered by 12 V batteries.

With compact design that measures 6 5/8 in. long, 6917DWDE utilizes 2-piece motor that incorporates rare-earth magnet, replaceable armature, and field and externally accessible brushes. It offers variable speed for controlled fastening from 0-2,300 rpm and impact system rated at 0-3,000 ipm. With maximum torque of 88.3 lb-ft, 3/8 in. square drive tool is suited for fastening applications. Product...

Read More »
Tools

Screwdrivers prevent tool loss and deliver more twist.

Screwdrivers suit heavy-duty work involving tough-to-budge slotted screws and bolts. Square shank provides grip for pliers and wrenches to safely deliver more torque. Square-shaped handle with molded-in thumb stop creates strong, comfortable grip for turning difficult screws by hand, and prevents roll-away when tool is laid down. Chrome blades resist corrosion and facilitate cleanup. Screwdrivers...

Read More »
Cordless Electric Riveter is powered by 12 V Ni/Cd battery.
Tools

Cordless Electric Riveter is powered by 12 V Ni/Cd battery.

Suited for off-line and outdoor riveting applications where compressed air is not available, BR-200M employs compact design and sets up to 3/16 in. rivets in all materials. Unit offers Quick Set trigger mechanism for rapid rivet placement and Ultra Jaws, which extend jaw life, all packaged in one molded plastic carrying case. Equipped with charger and battery pack, product outputs traction power...

Read More »
Hole-Cutting Base suits depressurized piping systems.
Tools

Hole-Cutting Base suits depressurized piping systems.

HOLE MASTER(TM) provides means of clamping onto pipe and using drill to cut hole in pipe. It comes with base, chain, and screw. Plate and drill holder allow mounting drill with hole saw, while handle and gear provide leverage for cutting holes in pipe. Pipe diameter mounting range is 1Â-¼-10 in. Base fits up to 4¾ in. hole-saw diameter. HOLE MASTER works with Dewalt® DW131...

Read More »

All Topics