Tools

Table Saw features table extension and storage.
Portable Circular Saws

Table Saw features table extension and storage.

Featuring 25Â-½ x 30 in. table and no-load 3,950 rpm 15 A motor, 70 lb TS 250 Portable Table Saw features cutting depth of 3 1/8 in. at 90° and 2½ in. at 45° with 10 in., 34-tooth carbide blade. Saw crosscuts up to 22 in. with T-slot miter gauge and allows -1.5° to 46.5° bevel. Table extension allows rip cuts to 24¼ in. Saw includes parallel fence,...

Read More »
Electric Hammers

Rotary Hammer features vibration absorbing grip.

Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and...

Read More »
Tools

Impact Wrench features ergonomic design.

Covered in soft elastomer compound that absorbs vibration and provides slip-resistant grip, Â-½ in. WR16SA is constructed with aluminum housing intertwined with injection molded inner nylon core. Armature bearing is seated in aluminum to withstand heat and stress resulting from extreme use. Weighing 6.17 lb, this 10.15 in. long tool uses 4.2 A, 480 W motor to produce up to 3,190 lb-in....

Read More »
Electric Breaker features fatigue-reducing design.
Tools

Electric Breaker features fatigue-reducing design.

Designed for wall or floor applications, TE 706-AVR Breaker incorporates brushless SR-motor, active vibration reduction system, and 3-level hammering power regulation. Control electronics provide continuous motor power, even during voltage fluctuations, and air flows over areas of motor, electronics, and hammering mechanism to keep tool and casing cool. Self-sharpening polygon chisels are offered...

Read More »
Circular Saw rips lumber and trim up to 2 1/8 in. thick.
Tools

Circular Saw rips lumber and trim up to 2 1/8 in. thick.

With no-load speed of 2,500 rpm, KSAP 18 Cordless 6Â-½ in. Circular Saw has a max cutting depth of 2.1 in. at 90° and 1.625 in. at 45°. Bevel plate provides bevel cuts up to 47°. Movable and fixed blade guards, as well as shoe, are made from die cast aluminum, and fan has safety lock switch and integrated dust extraction port for hookup to vacuum. Air-cooled battery system...

Read More »
Hand Held Drills

Cordless Hammer Drills power through many materials.

Powered by 2-piece rare-earth magnet motor and motor cooling system, tools can drill, drive, and hammer into wood, plastic, steel, aluminum, brick, and concrete block. Two 3.0 Ah NiMH batteries power DV18DMR 18 V drill to deliver 550 lb-in. of torque. DV14DMR 14 V delivers 460 lb-in. of torque with two 2.0 Ah NiCD batteries. Drills offer 2-speed transmission, no-load rpm, Â-½ in. industrial...

Read More »
Pneumatic Tool handles heavy-duty cable ties.
Tools

Pneumatic Tool handles heavy-duty cable ties.

Utilizing 90-105 psi, dry or lubricated air, Mark 9 Model MK9P facilitates assembly by tensioning and cutting-off heavy-duty cable ties with tensile strengths ranging from 50-250 lb. Offered in both lower air and upper air attachment versions, tool features trigger operation, chromium steel components, and high-impact, glass-reinforced nylon housing. Dial-in tension adjustment protects optimum...

Read More »
Circular Saw cuts angles up to 50°.
Tools

Circular Saw cuts angles up to 50°.

Along with 15 A motor, WSC 167 Circular Saw features cast magnesium construction, heavy-duty ball and needle bearing, and rear dust exhaust. Saw makes bevel cuts of up to 50°with positive stop at 45°, and electric blade brake stops tool when cut is finished. Included 15 ft cord allows for jobsite mobility, and optional parallel guide for repeated cuts is available. Also offered is WSC...

Read More »
Curved Clamp pulls SUV and van hatch openings.
Tools

Curved Clamp pulls SUV and van hatch openings.

Bulldog Curved Clamp grabs and holds onto curved pinchweld where other clamps will not attach. Unit pulls pinchweld to accurately seal weatherstrip to hatch. Individually adjustable teeth assure secure attachment, while elongated hole accepts almost any hook.

Read More »
Rope / Cable / Wire Cutters and Cutting Machinery

Tool Set includes cable cutter and pliers.

Suited for confined working spaces, 2-piece competition tool set features high-leverage cable cutter and 8 in. high-leverage diagonal-cutting pliers. Cable cutter has cable-gripping shear-type jaws that permit one-handed shearing action, while diagonal-cutting pliers have beveled cutting edge and induction-hardened cutting knives. Kit also includes 1/64-scale, die-cast replica of No. 26 Klein...

Read More »

All Topics