Tooling

>SAS< Automation, Introduces New GRF 20 - Long Life Gripper Finger
Grippers (Tools)

>SAS< Automation, Introduces New GRF 20 - Long Life Gripper Finger

Xenia, OH (November 2006) - >SAS< Automation is proud to expand options for End-of-Arm Tooling construction by re-engineering its GRF size 20 product line - to make it last even longer. This popular GRF has the capability to cycle significantly more than its original high quality gripper line. The GRF is a pneumatically controlled spring return gripper which is used to secure the more difficult...

Read More »
Vacuum Pump handles sealed objects in automotive industry.
Vacuum Pumps

Vacuum Pump handles sealed objects in automotive industry.

Vacustat-COAX® vacuum pump uses suction cups with decentralized vacuum power directly at point for efficient, secure material handling. Pump features integrated pneumatic ES function, built-in check valve on blow-off port, and Mini Pi12-2 COAX® cartridge with non-return valve. Available with lock pin, apple core, and ball-joint mounting options, Vacustat-COAX fits automotive industry...

Read More »
Truline Tool America's, a Division of Johnson Carbide Products, Inc., Issues License to European-Based H.A.M. Precision to Sell and Service the Truline Tool&reg; Family of Composite Boring Tools in Thirteen Countries
Tooling

Truline Tool America's, a Division of Johnson Carbide Products, Inc., Issues License to European-Based H.A.M. Precision to Sell and Service the Truline Tool® Family of Composite Boring Tools in Thirteen Countries

The successful development and application in North America of the new patented TruLine Tool® family of composite fine boring tools has prompted TruLine Tool® to undertake a broad European licensing agreement with well-known German-based carbide and tooling manufacturer, H.A.M. Precision. The TruLine Tool® technology will be sold and serviced by H.A.M. Precision in thirteen...

Read More »
Adapters convert ratcheting wrench into thin ratchet.
Tool Adapters

Adapters convert ratcheting wrench into thin ratchet.

Designed to fit 3/8, ½, and ¾ in., and 10, 13, and 19 mm ratcheting wrenches, ratchet adapters create low profile ratchets for space-constrained areas found in aircraft and automotive engines. Adapters can be used with ¼, 3/8, and ½ in. drive sockets, either English or Metric, as well as with spline sockets. Products use locking and release system and are available individually or in...

Read More »
Tooling

Tooling Column System features open design.

Incorporating principals of structural engineering, ModLoc(TM) Columns feature strong exterior structure with aluminum alloy or steel construction. Manifold and support brackets securely connect with fixture plates to form precise, integrated, rigid structure. SpeedLoc locator/fastener system allows endless configuration of columns, while open design permits hydraulic and electrical access to...

Read More »
Quick Change System eliminates prep work in tooling setup.
Tooling

Quick Change System eliminates prep work in tooling setup.

Providing means to meet requirements in machining of small- to medium-sized electrodes, Quick Change Tooling (QCT®) facilitates setup in sinker EDM tooling. Graphite blanks are ready to use with location and draw bar holes pre-machined into blank. QTC mounts with 3-dowel system to any manufacturer's existing system. After existing job is complete, draw bar and holder can be used for...

Read More »
Turning Machinery

Vertical Turning Center Display Highlights Multi-Tasking Capabilities

Chicago, IL, September 6, 2006 - At IMTS 2006 Giddings & Lewis features the G&L designed tooling system and heads that add multi-tasking capabilities to the vertical turning center product line, the VTC Series. Large capacity and easy access The VTC Series product line now consists of 6 models with table sizes ranging from 1250 mm (49.2 in) to the new 3500-mm (137.8 in) version which has a...

Read More »
Enhanced Hardinge Elite II Turning Center to Be on Display at IMTS '06
Tooling

Enhanced Hardinge Elite II Turning Center to Be on Display at IMTS '06

ELMIRA, NEW YORK: The Hardinge Elite Series II turning centers (built in Elmira New York), already packed with features not found on competitive machines, has been re-engineered to enhance the machines' flexibility and work envelope. Designed for either small parts machining (1.625" or 2" bar) in a single set-up, or quick changeover to 6-inch or 8-inch chuck, Elite II machines feature superior...

Read More »
Tool Holder can be programmed to relocate component holders.
Tooling

Tool Holder can be programmed to relocate component holders.

Programmable EOAT tool holder assists molders and manufacturers by eliminating multiple end-of-arm tools and tool changers. Each of 4 tool holders can be used for vacuum cups or grippers mounted on individual linear actuators programmable for up to 28 separate locations. Design allows for interfacing with any robot style or make. Device can be fitted with all standard SAS components.

Read More »
Punch Press Products

Times Square Lighting Doubles Punch Press Tool Life while Eliminating Secondary Sanding Operations with a Switch to the Latest Mate Strippit Style Tooling

Stony Point, New York: Times Square Lighting punches up to 1000 components an hour used in its broad line of architectural and theatrical light fixtures. With complete in-house manufacturing facilities, the company recently upgraded its punch press tooling and more than doubled its tool life by replacing worn out tools with Mate Precision Tooling's latest thin turret tooling for Strippit CNC...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics