Deva and Nikon Metrology Unveil Innovative CMM Laser Scanning Solution
Integration of Nikon Metrology's Focus Scan with Deva CMM controller delivers winning combination Deva Electronic Controls recently teamed up with Nikon Metrology to integrate the Deva CMM Controller with Nikon Metrology digital laser scanning probes and Focus Scan software. Laser scanning is a developing technology well suited to today's quality control and reverse engineering challenges...
Read More »
Magnetic Workholding Chucks feature radial pole pitch.
Suitable for exact machining of thin-walled rings on rotary tables, cylindrical grinding machines, and lathes, MAGNOS Radial Pole Plates work with electrically activated permanent magnets. Workpiece can be machined from 3 sides without changeover, and since magnetic field is active up to outer fringe areas, large workpieces can be clamped securely and deformation-free. Depending on individual...
Read More »
Under the Sea, Under the Sea...Amlok Holding Tight Connections
Argus Subsea uses hydraulic rod locks from AME to secure underwater oilfield trees at 5000-6000' depths to 3000 psi and 50,000 pounds of axial holding Argus Subsea produces its AZ-10 fully concentric, vertical mono-bore subsea tree design for rapid field development. Originally designed for low net present value (NPV), marginal and smaller fields, where the capital investment containment is...
Read More »
Collet Chuck suits high-speed applications.
Featuring same bolt pattern as company's standard 4 in. models for interchangability, 5C Collet Chuck is actuated by air and uses proprietary standard air feed tubes (wet or dry). All components are hardened and ground to 58/63 RC, and all diameters are ground within 1/10,000 TIR. Able to run at speeds in excess of 8,000 rpm, chuck uses standard 5C collets.
Read More »
Things to Consider Before Designing Custom Packaging
This e-Book provides pre-design process considerations for custom corrugated packaging.
Read More »Jergens, Inc. Workholding Solutions Group to Highlight Quick Change Fixturing at IMTS 2010
Cleveland, OH - June 21, 2010 -Jergens, Inc. will showcase its line of quick change fixturing solutions in booth W-2312 at the 2010 IMTS show being held at Chicago's McCormick Place September 13 - 18. Jergens will hold demonstrations of its three premier quick change fixturing solutions, including the Bock Brand Quick Change System, the Ball Lock(TM) Mounting System, and the Zero Point System...
Read More »
Rush Machinery, Inc. to Spotlight Radius Grinding Fixtures at IMTS 2010
Rushville, NY - Rush Machinery, Inc. will spotlight its Radius Grinding Fixtures at IMTS - The International Manufacturing Technology Show 2010 being held at Chicago's McCormick Place September 13-18. Rush Machinery can be found in Booth #N-7233 in the Abrasive Machining/Sawing/Finishing Pavilion which is located in the North Building. These fixtures for grinding ball, corner radii and concave...
Read More »
Rush Machinery, Inc. to Showcase Air Bearing End Mill Grinding Fixture at IMTS 2010
Rushville, NY - Rush Machinery, Inc. will showcase its Air Bearing End Mill Grinding Fixture at IMTS - The International Manufacturing Technology Show 2010, being held at Chicago's McCormick Place September 13-18. Rush Machinery can be found in Booth #N-7233 which is located in the Abrasive Machining/Sawing/Finishing Pavilion in the North Building. The Air Bearing End Mill Grinding Fixture is...
Read More »
Flexible Fixturing stages parts on CMMs.
Featuring 70 pins with 0.160 in. pin diameter and .800 in. stroke, Pinhead Flexible Fixturing utilizes quick-clamping, maintenance-free mechanism that quickly and precisely fixes parts on coordinate measuring machines. Pin base height for mounting workpiece is 4.75 in. to top of pins. Pinhead kit comes with four 1 in. risers, four 1.5 in. risers, four 2 in. risers, and 4 swivel mounting arms with...
Read More »
Diaphragm Chuck features specialty application adapters.
Model DPH-400W 4 in. dia diaphragm chucks feature stops with 3 small air detect holes for part seating conformation - air is pumped through holes, and when part rests on the stop air pressure rises, tripping pressure switch that starts machining process. Four clover adapters have grooves for CAM follower to snap into to orient chuck when stopped, and 8 passage rotary union actuates all four...
Read More »
Workholding & Machine Tool Components @ IMTS 2010
FixtureworksTM (Fraser, MI), one of North America's leading suppliers of workholding technologies and machine tool components will showcase its extensive clamping, gripping, locating, positioning, and support products at Booth W-2346 during IMTS 2010, September 13-18, 2010, McCormick Place, Chicago. The display of products to be shown demonstrates the ability for OEMs, machine, forming and...
Read More »
DoorKing Releases Advanced Long Range Card Reader System with Frequency Hopping Technology
The DoorKing DKS AVI system is at the cutting edge of automotive security technology and represents a leap forward in engineering innovation. When it comes to long-range passive card readers, we lead the industry and set the standard for quality and performance. To find out why the DoorKing DKS AVI system is taking the automotive security industry by storm, see our video.
Read More »
