Tooling Fixtures

Micro Collet System optimizes milling and drilling accuracy.
Tooling Fixtures

Micro Collet System optimizes milling and drilling accuracy.

Equipped for use with 22, 25, and 33 mm IBAG Micro Line high-speed spindles, including back working and right angle models, Micro Collet System delivers accuracies of 1 micron TIR at collet nose and handles up to 1/8 in. tool diameter. Spindle speeds up to 90,000 rpm are possible, cutting cycle time and maximizing productivity. System is suited for precision milling and small drilling...

Read More »
Modular Fixturing Provides an In-Process Gauge
Tooling Fixtures

Modular Fixturing Provides an In-Process Gauge

Made from square tubing and sheet metal, the cut angles must be right in this salon chair. Using the system's precision adjustable angles, it is easy to check the quality of the stock before starting to weld. If the angle of the part doesn't match the fixture, the part needs to be fixed before welding can begin. The fixture provides an in-process gauge for checking parts before the first arc is...

Read More »
Collet Chucks feature air-activated design.
Tooling Fixtures

Collet Chucks feature air-activated design.

Interchangeable with 4 in. chucks, 5C Collet Chucks utilize standard wet or dry air feed tubes with same bolt pattern as 4 in. models. All components are hardened and ground to 58/63 R.C. and all diameters are ground within 1/10,000 T.I.R. Utilizing standard 5C collets as well as 5C expanding collets, chucks run at speeds in excess of 8,000 rpm.

Read More »
Amrok® Custom Dedicated Milling Fixtures
Tooling Fixtures

Amrok® Custom Dedicated Milling Fixtures

Solves Multiple Machining Challenges on 5000 Lb. Pump Housings, While Saving Cost And 50% Of The Set-up Time Weir Minerals North America, a Madison, Wisconsin manufacturer of large pumps for mining slurry applications, needed large 108 W x 108" H pump housing Class 40 iron castings machined, including milling, drilling and boring. Each pump housing consisted of a frame and cover section, each...

Read More »
Tooling Fixtures

GE Oil & Gas Drilling & Production Technology to Support Development of Gas Fields Offshore Vietnam

$30 Million Deal Marks Largest Contract for Surface Wellheads and Subsea Trees in Vietnam Ho Chi Minh, Vietnam - GE Oil & Gas' (NYSE: GE) drilling & production business has been selected to supply high-pressure, high-temperature (HPHT) equipment to Bien Dong Petroleum Operating Company, a subsidiary of the state-run Vietnam Oil and Gas Group (PetroVietnam), for the development of gas fields,...

Read More »
Double Output - a New Digitaltest Success Story for Condor
Tooling Fixtures

Double Output - a New Digitaltest Success Story for Condor

EKM Elektronik GmbH & Co. KG is a German subcontractor, offering a broad range of production services to the European market with more than 90 employees including; o Board assembly in leaded and lead-free technology; o Repair of PCB assemblies; o Protective coating of PCB assemblies using a range of conformal coatings o Encapsulation of assemblies; o Cleaning of PCB assemblies As an existing...

Read More »
Coolant Airblast Air Chuck grips hole saw blanks.
Tooling Fixtures

Coolant Airblast Air Chuck grips hole saw blanks.

Model 627w (.0001 TIR) 6 in. dia., coolant/air blast thru, 2-jaw air chuck, with 1 in dia. counter bore for tap clearance, provides workholding package to grip hole saw blanks for turning and tapping. Sub-jaws have 2 bullet nosed pins that will grip blanks between 2 holes, and Â-¾ in. wide jaws fit between 2 hardened and ground full circle segments mounted to chuck face to support workpiece...

Read More »
Fixturing for Welding - Electronic Enclosures
Tooling Fixtures

Fixturing for Welding - Electronic Enclosures

Sometimes a fixture does not need a table for its base. U-Form Spacer Blocks are assembled into a rectangular structure. Changeover for different sized parts is elegant, yet simple. Open access to the middle makes loading the loose pieces easier. The U-Form Spacer Block on the near side can be accurately shifted in or out depending on the part's width. Fixture Highlights Nearside U-Form Spacer...

Read More »
Tooling Fixtures

Deva and Nikon Metrology Unveil Innovative CMM Laser Scanning Solution

Integration of Nikon Metrology's Focus Scan with Deva CMM controller delivers winning combination Deva Electronic Controls recently teamed up with Nikon Metrology to integrate the Deva CMM Controller with Nikon Metrology digital laser scanning probes and Focus Scan software. Laser scanning is a developing technology well suited to today's quality control and reverse engineering challenges...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics