New Automatic Tool Changer Increases Production Level and Utilization Rates
Allows fully automated tool setup, removal and freeing up operator to perform other tasks. Available with 107.3 x 170.6 foot storage capacity and allows for tooling variation on market ranging from high-runner V-dies to specialized hemming or offset tools. Manipulator is equipped with a tool and bed cleaner that runs automatically during tool changes.
Read More »
New MC-10 Manual Tool Changer Comes with Multiple Fail-Safe Features
ATI’s MC-10 Manual Tool Changer is designed for collaborative robot applications. Unit’s ergonomic twist-collar locking mechanism provides secure attachment of the tool. MC-10 features four integrated pneumatic pass-through ports and allows connection with electrical utilities. Unit can carry payloads of up to 22 lbs and is resistant to vibration.
Read More »
New MC-10 Manual Tool Changer Comes with Multiple Fail-Safe Features
ATI’s MC-10 Manual Tool Changer is designed for collaborative robot applications. Unit’s ergonomic twist-collar locking mechanism provides secure attachment of the tool. MC-10 features four integrated pneumatic pass-through ports and allows connection with electrical utilities. Unit can carry payloads of up to 22 lbs and is resistant to vibration.
Read More »
More Flexible Coating - See the SCS PrecisionCoat Tool Changer at SMTAI
August 2017 (Indianapolis, IN) - Specialty Coating Systems (SCS) today announced plans to show the SCS PrecisionCoat Tool Changer at SMTA International scheduled to take place Sept. 19-20, 2017 at the Donald Stephens Convention Center in Rosemont, IL. The flexible, advanced coating feature on SCS’ PrecisionCoat V platform will be available for demonstrations in Booth #1006. In the world of...
Read More »
Material Selection Guide: High & Low Density Polyethylene
In this eBook, learn about high-density and low-density polyethylene's similarities, differences, and practical applications from New Process Fibre.
Read More »
More Flexible Coating - See the SCS PrecisionCoat Tool Changer at SMTAI
August 2017 (Indianapolis, IN) - Specialty Coating Systems (SCS) today announced plans to show the SCS PrecisionCoat Tool Changer at SMTA International scheduled to take place Sept. 19-20, 2017 at the Donald Stephens Convention Center in Rosemont, IL. The flexible, advanced coating feature on SCS’ PrecisionCoat V platform will be available for demonstrations in Booth #1006. In the world of...
Read More »
REGO-FIX to Highlight Broad Range of Tooling Solutions at EASTEC 2017
INDIANAPOLIS, Ind., May 2, 2017 - At EASTEC 2017 in booth #5320, REGO-FIX will feature tooling technologies that securely clamp tools in a wide variety of applications, enhance clamping capabilities and speed tool changing. The company will showcase its powRgrip® Toolholding Collet system, ER collets, SwissQuick ER-to-ER adaptors and micRun® clamping system. The powRgrip system relies on the...
Read More »
REGO-FIX to Highlight Broad Range of Tooling Solutions at EASTEC 2017
INDIANAPOLIS, Ind., May 2, 2017 - At EASTEC 2017 in booth #5320, REGO-FIX will feature tooling technologies that securely clamp tools in a wide variety of applications, enhance clamping capabilities and speed tool changing. The company will showcase its powRgrip® Toolholding Collet system, ER collets, SwissQuick ER-to-ER adaptors and micRun® clamping system. The powRgrip system relies on the...
Read More »
NanoFix® Quick Change System uses Torx locking mechanism.
Featuring 5 μm on 30 mm high concentricity and 22 mm spindle distance, repeatable accuracy and short projection, NanoFix® Quick Change System is designed for Swiss-type tooling. Taking less than 15 sec for changing tools inside the Swiss lathe, system’s NanoFix adapter can be released and removed using one hand with Torx locking mechanism. Product replaces hard-to-reach ER collets.
Read More »
NanoFix-® Quick Change System uses Torx locking mechanism.
Featuring 5 μm on 30 mm high concentricity and 22 mm spindle distance, repeatable accuracy and short projection, NanoFix® Quick Change System is designed for Swiss-type tooling. Taking less than 15 sec for changing tools inside the Swiss lathe, system’s NanoFix adapter can be released and removed using one hand with Torx locking mechanism. Product replaces hard-to-reach ER collets.
Read More »
SHS Manual Tool Change System comes with ISO flange pattern.
Available in six sizes, SHS Manual Tool Change System features integrated pneumatic feed through. System can be easily assembled without need of additional adapter plates.
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
