Slim-Fit Modular Tool
January 1, 2005 Slim-Fit Modular Tool Holding System With Techniks Slim-Fit system machinists can choose from either shrink-fit or collet-style tool holding without changing holders. John Stagge, President of Techniks, said; We designed Slim-Fit to provide the best features of all our toolholders in one system. Slim-Fit has turned out to be the most affordable shrink-fit solution on the market...
Read More »Tap Holding System features one-touch axial adjustment.
With STM Tap Holding System, tap projection length can be adjusted by hand rotating guide ring on outside of toolholder. Axial adjustment range varies depending on size of toolholder, but is as high as 0.591 in. Taps are securely held in place by 1-piece steel spring collets, and are further prevented from rotating by interchangeable preset drivers. System accommodates 1,000 psi of coolant...
Read More »REGO-FIX-® to Showcase Flexible powRgrip-® System at EASTEC 2006
Indianapolis, Indiana, February 21, 2006 - REGO-FIXÃ-® will be demonstrating its revolutionary powRgripÃ-® system and other products and solutions at EASTEC 2006. REGO-FIX will occupy booth #3145 at the trade show, which takes place May 23 - 25 at the Eastern States Exposition Grounds in West Springfield, Massachusetts. The REGO-FIX powRgrip system uses a toolholder and collet that allow...
Read More »
Tool Holder features locking and cooling system.
Suited for general turning applications from heavy roughing to high-speed finishing, Jet-Stream(TM) features Dor-Lock clamping system, which provides holding security, and precisely controls velocity of air or liquid coolant flow in one system. While cutting at high speeds, coolant velocity keeps chips from adhering to cutting edge. Able to replace any standard turning holder, Jet-Stream conforms...
Read More »Bearing Solutions for Machine Tool Applications
An in-depth overview of the types of bearings used in machine tool applications. Check out this eBook to learn more.
Read More »Toolholder Cartridge System has serrated locking design.
Consisting of toolholder and cartridge, MTC SLS Cartridge System converts standard multi-component design into one piece. Both components have serrations or interlocking ridges on inner sides, which create tight fit between cartridge and toolholder. System accommodates any MTC double-ended, double V design inserts, which perform cutoff, plunge-and-turn, plunge-and-contour, and face grooving...
Read More »Toolholder offers operational flexibility.
Featuring flexible design with complete tool rigidity, Zero-Z toolholder is pre-balanced to G2.5 at 22,000 rpm and comes with Hi-Q external clamping nut. Design also features flush collet nut, eliminating tool overhang. Suited for multiplex turning machines and small VMCs, product is compatible with CAT 40 taper and ER 32 series collets as well as company's tapping collets for tapping...
Read More »Bit Holders provide torque control on hard joints.
When used with current-control driver, Compliant Drive(TM) Bit Holders permit driver to complete joint even if running at full speed. Units work with Smart Torq(TM) II Controller, which provides error-proof fastener assembly by controlling and monitoring dc brushless electric screwdrivers. With 8 programmable torque settings, controller offers adjustable go-no-go limits for cycle time, joint...
Read More »Tool Holding System is designed for high-speed machining.
Capable of reaching into deep cavities and machining challenging areas without compromising part accuracy or repeatability, powRgrip extensions are available in 120, 160, and 200 mm and allow use of tools from 2 mm to 3/8 in. Extensions feature holder, collet, and mini-press. With Swiss precision grinding TIR of less than 0.0001 in., system is compatible with REGO-FIX's PG 15 and PG 25 series...
Read More »Collet Holders feature keyless design.
Available in 4 models, BT Collet Holders are made from case-hardened steel and capable of up to 42,000 rpm. Units in ER Series come in standard and ultra-precision models and can clamp tool shanks from 0.0787-0.6299 in. Models in powRgrip Series clamp tool shanks from 0.0787-0.7874 in. and use mechanical properties of holder material to generate gripping force with run-out below 0.0001 in. All...
Read More »
Toolholders suit small-sized, high-speed tools.
Incorporating ShrinkerÃ-® technology, ThermolockÃ-® Toolholders include 60 units designed for tools down to 1/8 in. ThermolockÃ-® Extensions are suited for small diameter tools and expand functionality of larger toolholders. Holders have no moving parts, set screws, collets, or nosepieces and provide 360Ã-
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
