Insert Holders offer adjustable chamfering angle.
BIG Kaiser Precision Tooling Inc. introduces adjustable chamfering insert holders for the TW Series of Kaiser twin boring heads. These new insert holders accept ISO standard SC inserts and allow infinite adjustment of the insert pocket between 15-° and 75°. Graduations of 15° are shown on the holders for quick reference, and intermediate angles can be set with the use of a tool presetter....
Read More »
Compact Toolholder is suited for high-speed applications.
Offering run-out accuracy of less than 3 microns and feed rate up to 20 m/min, TRIBOS-RM is designed for cutting speeds up to 50,000 rpm in applications that require low interference. Clamping process, which uses elastic forces of material to clamp tool shank, can be done within 30 sec via SVP-2 (manual) or SVP-3 (automatic) clamping device together with corresponding reduction inserts. Due to...
Read More »
Compact Toolholder is suited for high-speed applications.
Offering run-out accuracy of less than 3 microns and feed rate up to 20 m/min, TRIBOS-RM is designed for cutting speeds up to 50,000 rpm in applications that require low interference. Clamping process, which uses elastic forces of material to clamp tool shank, can be done within 30 sec via SVP-2 (manual) or SVP-3 (automatic) clamping device together with corresponding reduction inserts. Due to...
Read More »
New Tool Tower for CAPTO Tooling
Huot's Tool Tower is now available for CAPTO-® tooling. The tower is specially fabricated to hold C5 CAPTO tooling. It comes with specially molded, nylon insert rings designed to securely fit CAPTO tooling. The inserts protect the CAPTO tooling from damage and nicks when taking tooling in and out of storage. The 3 foot high tower provides cost-effective, free-standing storage at the machining...
Read More »
The Ultimate Guide to Enclosed Tubular Drag Cable and Disc Conveyors
This whitepaper provides a comprehensive overview of enclosed tubular drag cable and disc conveyors.
Read More »
New Tool Tower for CAPTO Tooling
Huot's Tool Tower is now available for CAPTOÃ-® tooling. The tower is specially fabricated to hold C5 CAPTO tooling. It comes with specially molded, nylon insert rings designed to securely fit CAPTO tooling. The inserts protect the CAPTO tooling from damage and nicks when taking tooling in and out of storage. The 3 foot high tower provides cost-effective, free-standing storage at the...
Read More »
Toolholding System clamps tools without generating heat.
Featuring holder, collet, and mini-press generating 6 tons of force, powRgrip-® collet system relies on interference between holder and collet to generate clamping force, with run-out below 0.0001 in. Available from 1/8-¾ in., including metric sizes, interchangeable collets will hold both carbide and HSS tools. Less than 10 sec are needed to press in tool or remove it from holder, and tools...
Read More »
Toolholding System clamps tools without generating heat.
Featuring holder, collet, and mini-press generating 6 tons of force, powRgripÃ-® collet system relies on interference between holder and collet to generate clamping force, with run-out below 0.0001 in. Available from 1/8-þ in., including metric sizes, interchangeable collets will hold both carbide and HSS tools. Less than 10 sec are needed to press in tool or remove it from holder, and...
Read More »More Thermolock® Shrink-Fit Tool Changers & Toolholders Available from Command Tooling Systems
RAMSEY, MN-Command Tooling Systems has announced the expansion of its ThermoLock® Shrink-Fit product line with the addition of metric BT, DIN & various HSK toolholders, 3º tapered nose extensions along with five new tool changers, making this extensive new offering of shrink-fit solutions one of the most comprehensive industry-wide. Command® ThermoLock toolholders and extensions incorporate...
Read More »More Thermolock-® Shrink-Fit Tool Changers & Toolholders Available from Command Tooling Systems
RAMSEY, MN-Command Tooling Systems has announced the expansion of its ThermoLock-® Shrink-Fit product line with the addition of metric BT, DIN & various HSK toolholders, 3º tapered nose extensions along with five new tool changers, making this extensive new offering of shrink-fit solutions one of the most comprehensive industry-wide. Command® ThermoLock toolholders and extensions...
Read More »
Adjustment Free Rotary Broaching Tool Holder
Slater Tools Inc. is announcing the release of a new Adjustment Free Rotary Broaching Tool Holder designed for swiss type machines. Swiss type tools are increasingly popular due to their use in aerospace and medical applications, such as with orthopedic bone screws and other micro fastener products. Slater's new adjustment free design allows the operator to use the tool holder without the need...
Read More »
ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »
