For High Performance Micro Machining, Try the TRIBOS-RM ISO
Separate laws apply for micro-machining, which is why SCHUNK is offering the TRIBOS-RM precision toolholder as the best solution for micro machining with ISO interface. The one-piece, rotationally symmetric design ensures long life of the machine spindles and the complete transmission of power. Compared with heat shrink tool clamping, the TRIBOS-RM scores full points with steady tool clamping...
Read More »Long Parts Storage System holds items over 36 in. long.
Molded from high-impact plastic, ProHANGER is suited for holding long tubes (plastic or metal), rods, electrical conduit, lumber, trim, and pipes over 36 in. long. It can be used with louvered or rail hanging systems, or can be attached to any surface with screws. Featuring bright red color for visibility in dark or in low-light environments, system can be used alone or placed side-by-side to...
Read More »Long Parts Storage System holds items over 36 in. long.
Molded from high-impact plastic, ProHANGER is suited for holding long tubes (plastic or metal), rods, electrical conduit, lumber, trim, and pipes over 36 in. long. It can be used with louvered or rail hanging systems, or can be attached to any surface with screws. Featuring bright red color for visibility in dark or in low-light environments, system can be used alone or placed side-by-side to...
Read More »
CNC Engraving Toolholder is available in 20 mm size.
With integrated collet that allows quick changes of engraving toolbits, 20 mm dia Spring Loaded Engraving Toolholder can be used in CNC machines with 20 mm collet or end mill holder and is designed for high-volume, high-speed production engraving. Collet can be changed to hold variety of engraving tool sizes in diameters of 1/8, 3/16, and -¼ in. and 4 and 6 mm. Spring Loaded Engraving Tools...
Read More »
Mitigating Supply Chain Risks for Sheet Metal Components
This ebook provides an overview into mitigating supply chain risks for sheet metal components.
Read More »
CNC Engraving Toolholder is available in 20 mm size.
With integrated collet that allows quick changes of engraving toolbits, 20 mm dia Spring Loaded Engraving Toolholder can be used in CNC machines with 20 mm collet or end mill holder and is designed for high-volume, high-speed production engraving. Collet can be changed to hold variety of engraving tool sizes in diameters of 1/8, 3/16, and Ã-¼ in. and 4 and 6 mm. Spring Loaded Engraving Tools...
Read More »
Quick Release Ratchets are ergonomically designed.
ASME B107.10 specified quick release ratchets come in -¼, 3/8, and ½ in. drive sizes and include low-profile quick release button on backtop of ratchet head. They securely hold sockets while in use, allowing users to change sockets with one hand. Each ratchet has pear-shaped head, and 45-tooth internal gear design to provide 8 degree ratcheting arc. Sealed head design stops dust and other...
Read More »
Quick Release Ratchets are ergonomically designed.
ASME B107.10 specified quick release ratchets come in Ã-¼, 3/8, and ý in. drive sizes and include low-profile quick release button on backtop of ratchet head. They securely hold sockets while in use, allowing users to change sockets with one hand. Each ratchet has pear-shaped head, and 45-tooth internal gear design to provide 8 degree ratcheting arc. Sealed head design stops dust and...
Read More »
SCHUNK Offers an Economic Toolholder: TENDO-E
The high-precision TENDO-E hydraulic expansion toolholders meet the highest demands of quality in metal-cutting production. They provide the perfect combination of performance and value, along with superior vibration dampening. This results in a longer tool life, gleaming workpiece surfaces, and minimum stress on the spindle. The TENDO-E can be changed in seconds without additional peripheral...
Read More »
SCHUNK Offers an Economic Toolholder: TENDO-E
The high-precision TENDO-E hydraulic expansion toolholders meet the highest demands of quality in metal-cutting production. They provide the perfect combination of performance and value, along with superior vibration dampening. This results in a longer tool life, gleaming workpiece surfaces, and minimum stress on the spindle. The TENDO-E can be changed in seconds without additional peripheral...
Read More »
Balancing Accessories compensate for imbalanced tool assemblies.
Balance Rings work with standard boring bar components for diameters up to .394 in. and attach at front end of boring head. For diameters up to 2.125 in., Radial Adjustable Holders keep boring head cartridge and boring bar close to center position while adjustable insert holder is used for coarse diameter adjustment. Both are designed for 112 Series EWN precision boring heads and allow...
Read More »
High or Low Volume Custom Crates and Boxes Available from Reid Packaging
Reid provides mil-spec crates and corrugated boxes in custom dimensions from single to triple wall and will even package them on-site. Check out the video to learn more.
Read More »
