Sandvik Coromant's CoroTurn-® HP Range of Turning Toolholders are Ideal When Using Negative Inserts
Sandvik Coromant's accurate coolant jets of CoroTurn HP improve machining performance by delivering cutting fluid at the precise point of cut To meet rising demand for the ability to apply high pressure coolant at point-of-cut when using negative inserts, Sandvik Coromant has extended its CoroTurnÃ-® HP range of turning toolholders with integrated high pressure delivery capability. The new...
Read More »Toolholders are suited for high-speed cutting applications.
Balanced by design to G 2.5 at 25,000 rpm, Q+Ã-® system CAPTO toolholders are suited for high-speed and high performance cutting applications. High precision toolholders are available in powRgripÃ-® collet system and ER toolholder line. Type H toolholders are ready to accept Hi-QÃ-® balancing rings that allow precision balancing of system up to 80,000 rpm.
Read More »Flexible Precision Toolholder for Tool Grinding
The precise prism toolholder type PRISMO clamps every shank diameter between 5 and 20 millimeters With its eroded prism guidances, PRISMO the toolholder for tool grinding from SCHUNK clamps different shank diameters with a repeat accuracy of less than 0.005 mm. Without any doubt, the PRISMO tool grinding toolholder from SCHUNK is one of the highlights of this year's GrindTec show. With its...
Read More »Milling Toolholder supports heavy-duty cutting.
Universal toolholder SINO-R uses solid body as pressure medium that enables clamping of cutting tool with actuation wrench. Intermediate sleeves allow nearly all common tool shank diameters to be clamped. Maintenance-free device has maximum torque transmission of 627 lb-ft at clamping diameter of 1.25 in., and is precision-balanced standard to 6.3 G at 15,000 rpm. High radial rigidity/dampening...
Read More »Why Use A Locking Cord?
Learn about the benefits of using locking cords in applications that rely on extensive technological infrastructures.
Read More »More Sliding Head Users to Benefit from Sandvik Coromant's QS System
Additional Sandvik Coromant customers can enjoy reduced downtime through faster tool changes Sandvik Coromant's innovative QS(TM) holding system, already available for users of Citizen and Star automatic sliding head lathes, is now being introduced for machine shops with Tornos, Tsugami and Nexturn sliding head models. Released as part of Sandvik Coromant's CoroPak 10.1 phase of product...
Read More »Haimer USA Uses New Demonstration Vehicle to Bring Technology to Prospective Customers
VILLA PARK, IL - An old proverb says you can't bring the mountain to Mohammed, but Haimer USA is bringing its mountain of shrink-fit tool holders, tool balancing and other technology to its prospective customers via its new technology demonstration vehicle. Mounted on the chassis of a GMC Top Kick C4500 diesel is a 6-by-10-foot traveling showcase that features the latest shrink-fit tool holders,...
Read More »REGO-FIX-® Unveils New Line of Extended Reach Toolholders
Indianapolis, Indiana, March 30, 2009 - REGO - FIX has announced the introduction of a new program of toolholders that provide an extended reach of up to 18 . Available for the company's ER and powRgrip product lines, the extended reach toolholders will make their worldwide debut at WESTEC 2009. The extended reach toolholders will be offered with CAT, BT and HSK tapers in 2 increments up to a...
Read More »Shrink Fit Toolholders offer optimized gripping.
Model HSK32E/40E Shrink Fit Tool Holders are prebalanced to 2.5 G at 40,000 rpm while #40 taper/HSK63 holders are balanced to 2.5 G at 20,000 rpm and #50 taper/HSK100 units to 2.5 G at 15,000 rpm. Combined with Shrink Fit Unit, toolholders heat up and cool, with thermal contraction exerting uniform pressure for gripping. Units allow for tool changes in less than 30 sec and are available in both...
Read More »MSC Industrial Direct Co., Inc. Exhibits New Customer Solutions at EASTEC
Melville, New York, March 31, 2009 - MSC Industrial Direct Co., Inc., the country's leading distributor of metalworking and maintenance, repair and operation supplies, will showcase a variety of customer solutions at EASTEC 2009. MSC will be located in booth 5323 from May 19 - 21 at the Eastern States Exposition Grounds in West Springfield, Massachusetts. Visitors to booth 5323 will have an...
Read More »Hydraulic Toolholders require no intermediate sleeves.
TENDO hydraulic expansion toolholders clamp different types of cutting tools with cylindrical shanks directly in toolholder without using intermediate sleeves. Tools with different shanks are held with concentricity of less than 0.003 mm. System also absorbs vibrations inherent in cutting or grinding processes, with T.I.R. accuracy and repeatability of less than 3 microns. Completely closed...
Read More »Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance
Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.
Read More »