Frequency Synthesizers

Zarlink and Marvell® First to Demonstrate Synchronous Ethernet Solution Supporting Network-Quality Performance

Companies demonstrate synchronization over Ethernet physical layer using Zarlink PLL (phase locked-loop) and Marvell Ethernet PHY technologies OTTAWA, Jan. 31 /- Zarlink Semiconductor (NYSE/TSX:ZL) and Marvell® (NASDAQ:MRVL) today announced the successful demonstration of a synchronous Ethernet solution using already available products from both companies that will allow carriers to support...

Read More »
Count-Up Controllers allow unattended equipment operation.
Controls and Controllers

Count-Up Controllers allow unattended equipment operation.

Programmable in .01-99.99 sec, 1-9,999 min, or 1-9,999 hr intervals, Model 1 Walkaway(TM) Turn-off Controller counts up and turns any piece of equipment off at end of set time period. Model 2 Walkaway Repeat Turn-on/Turn-off Controller, programmable for 1-99 sec/min/hr intervals, counts up and turns any piece of equipment on for programmed time and off for different programmed time. Repeat...

Read More »
Lines

Can-Eng Furnaces Supplies Bright Tube Annealing Line

Can-Eng Furnaces Ltd., Global Furnace Systems Group is manufacturing a 1500 kg/hr automotive steel tube annealing line for an undisclosed Mexican manufacturer. The unit will be used to bright anneal tubing in lengths up to 8 m long under low dewpoint EXO gas. The complete line comprises a load table, roller hearth annealing unit, and roller hearth water cooled chamber, unload table, 10,000 CFH...

Read More »
Directory Signage from Vista System, Utilizes MCFT Technology to Provide Endless Design Possibilities
Signs

Directory Signage from Vista System, Utilizes MCFT Technology to Provide Endless Design Possibilities

Vista System International, a fast growing pioneer and world leader in Modular Curved Frame Technology (MCFT) with US based operations in Sarasota, Florida, recently produced an attention-getting sign system for a Hermann Mannheim GmbH installation at Gasanstalt Kaiserslautern. Gasanstalt Kaiserslautern was undergoing an image makeover and was looking for a sign system that will complement this...

Read More »
Electrical Switches Buying Guide
Sponsored

Electrical Switches Buying Guide

Electrical switches are required to control power, process functions, and machinery, along with numerous other applications. In this buying guide, learn about what considerations you have to take before sourcing electrical switches.

Read More »
Generators

HÃœTTINGER Elektronik Introduces the New Mid-Frequency Generator SCASAR

High performance for superior thin films SCASAR - HUETTINGER's new medium frequency generator, now offers a cost-effective alternative to pulsed DC processes. A world market leader in generators for large area coatings, HUETTINGER has applied their decades of experience to this modular generator concept, which was presented for the first time at the 6th International Conference on Coatings on...

Read More »
Clocks

Synchronous Clock targets SETS applications.

Single-chip Model STC4130 accepts 12 reference inputs and generates 8 independent synchronized output clocks, which may be programmed for wide variety of SONET and SDH frequencies. Reference input frequencies are automatically detected, and inputs are individually monitored for quality. Providing 0.1 ppb hold over accuracy, Model STC4130 supports master/slave operation with SyncLink(TM)...

Read More »
DDR3 Register is designed for memory modules.
Clocks

DDR3 Register is designed for memory modules.

Manufactured on 130 nm process technology, SN74SSTE32882 integrates 28-bit, 1:2 configurable registered buffer; register; and phase-locked loop (PLL) for DDR3 registered dual in-line memory modules (RDIMMs). Clock and control outputs can be programmed with differing drive strengths. Along with full support for parity features as well as spread spectrum clocking, single-chip device offers data...

Read More »
Stopwatch Timer displays event times in ms, sec, min, or hr
Timers

Stopwatch Timer displays event times in ms, sec, min, or hr

Timing events from 1 µs to 999,999 hr, Laureate Model FRS, 6-digit panel-mount timer displays event times in ms, sec, min, or hr. Accumulated time from multiple events can be tracked and displayed, automatically stored in non-volatile EEPROM even in absence of power. Featuring dual-channel signal conditioner accepting signals from 12 mV to 250 Vac, timer has 2 modes allowing start and stop...

Read More »
NIST Traceable Timer provides 0.01% accuracy.
Timers

NIST Traceable Timer provides 0.01% accuracy.

Measuring 2Â-½ x 2 x 7/8 in., Traceable® Nano(TM) Timer displays countdown alarm timer/stopwatch time, and time of day with press of button. Unit can count down or up to 23 hr, 59 min, 59 sec on 2 timing channels. For repetitive tests, 2-channel memory automatically returns display to original programmed time. Timer features high-decibel alarm that sounds for 1 min and 3/8 in. high...

Read More »
Clocks

Synchronized Clock System is suited for small businesses.

Set up using plug and play connections, Clocks in a Box provides businesses with everything needed to implement facility-wide standard time. Pre-engineered synchronous time system includes one Model 7000 Master Control, 4 analog synchronous clocks, and one digital synchronous clock. System also includes 24 V bell with scheduling software capable of 300 events; wire for bell operation; and cables...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics