Tilt Trucks

One-Piece Tilt Trucks offer 1 cubic yard capacity.
Tilt Trucks

One-Piece Tilt Trucks offer 1 cubic yard capacity.

Rotationally molded from HDPE with internal rib design, Poly-Trux® P-405 Heavy Duty Tilt Trucks have powder coated steel support frame and base that safely accommodate up to 1,300 lb of material. Units roll and steer on two 10 in. rear wheels and 2 swiveling front, non-marking casters. Available with optional tow hitches, hinged lids and nylon dust covers, tilt trucks are suited for...

Read More »
Tilt Trucks

Nation's Oldest City Grapples into the Future

Due to the current economic situations of many government agencies, it has become imperative to find creative ways to maintain services, increase revenue, and enhance the stability of budgets. In St. Augustine, the nation's oldest city, bulk collection has gone from a two-man collection to a one-man collection vehicle. As a result, the bulk collection system has become more efficient and cost...

Read More »
Tilt Trucks

Powered Tilt Truck hauls heavy garbage and trash.

Designed to eliminate manual pushing of heavy garbage containers, Motorized Tilt Truck can haul loads up to 2,000 lb. Truck has variable speed twist grips that allow operator to travel at speeds of 0-3 mph forward or backward. With heavy-duty, 24 V motor powered by two 12 V batteries, truck can perform without recharging for up to 8 hr. Ergonomically designed vehicle is suited for daily duties in...

Read More »
Motorized Tilt Truck has 500-1,000 lb load capacity.
Tilt Trucks

Motorized Tilt Truck has 500-1,000 lb load capacity.

Featuring drive speed of 1-3 mph to cover variety of terrain, Motorized Tilt Truck offers up to 5 hr or 15 miles of operation on single charge. It has ergonomic steering handle with 2 paddle controls that can only be operated with two hands, making it safer to steer and maneuver. With structural foam construction and hinged frame design, truck facilitates material handling in theme parks,...

Read More »
MTS MH Sensors Make Refuse Collection Vehicles Perform Better, Longer
Tilt Trucks

MTS MH Sensors Make Refuse Collection Vehicles Perform Better, Longer

CARY, N.C. - (May 15, 2008) - MTS Systems Corp., Sensors Division is providing its MH mobile hydraulic magnetostrictive sensors to FAUN Environnement (Guilherand Granges, France) for the vehicle manufacturer's VARIOPRESS rear loader series. The VARIOPRESS removes selective and household refuse at a quantity of 1,000 bins a day. "Due to their excellent reliability, high interference immunity and...

Read More »
Tilt Trucks

Rexroth Hydraulic Hybrid Technology to be Tested in NYC Refuse Trucks

Rexroth, along with Crane Carrier Company and ISE Corporation, make up the supplier team for the HTUF project. Bosch Rexroth's Hydrostatic Regenerative Brake (HRB) system will be tested in refuse trucks in the city of New York - potentially reducing fuel consumption and accompanying emissions by 30-50%. (Rochester Hills, MI - www.boschrexroth-us.com) Bosch Rexroth has been selected by CALSTART's...

Read More »
Tilt Trucks feature ergonomic hinged lid.
Tilt Trucks

Tilt Trucks feature ergonomic hinged lid.

Available in capacities from 750-2,000 lb, Poly-Trux® truck line features molded, hinged split lid that permits cover of trucks to be opened and closed with one hand. Lid fits over outer rim when in its covered position to control odors; guard against personal contact with germs, sharps, and other hazards; and hide cargo from view. Trucks, suited for collecting refuse, scrap, laundry bags,...

Read More »
Tilt Truck offers 2,000 lb capacity.
Tilt Trucks

Tilt Truck offers 2,000 lb capacity.

H Series tilt trucks are designed with dual reinforcing braces set near upper rim and mid-section to strengthen key load bearing areas. Trucks are set on full perimeter, powder coated steel underframes atop four industrial strength casters and nest when empty. Developed for collection and transfer of laundry, linens, waste, recyclables, and other materials, trucks are molded in polyethylene...

Read More »
Tilt Trucks come in 19 styles.
Tilt Trucks

Tilt Trucks come in 19 styles.

Haul-All Tilt Trucks are offered in 6 sizes ranging from 1/3-3.0 cubic yard. Smallest unit provides compact size for tight spaces. Molded plastic bodies are available in variety of colors, as are optional hinged lids.

Read More »
Container Tilter handles up to three tons.
Tilt Trucks

Container Tilter handles up to three tons.

Tilt Master can lift and position filled tote boxes or baskets without need of fork truck or lift table. Available in capacities to 6,000 lb, tilter rotates 90°. Folding handle has dual steering grips for quick and easy maneuverability. Automatic adjustable floor lock engages as soon as forks rise to 20°. It has 8 x 2 in. phenolic rear wheels, 3 x 1 1/2 in. phenolic front wheels,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers