Threaded Fastener Inserts

Insert allows for pre-positioning in poured concrete decks.
Threaded Fastener Inserts

Insert allows for pre-positioning in poured concrete decks.

Designed to attach hanger rods or seismic bracing attachments in metal deck formed concrete, Figure 150 Wing-It deck insert features steel flange nut that bites into metal decks to ensure no tipping of anchor, before or during concrete pour. It attaches to various shaped holes including cut, drilled, punched or burned hanger rods and is available in sizes ranging from 3/8 to 7/8 in. It can be...

Read More »
Jergens Expands Keylocking Thread Repair Inserts Line with MS and NAS Standards Models
Threaded Fastener Inserts

Jergens Expands Keylocking Thread Repair Inserts Line with MS and NAS Standards Models

June 21, 2007-Jergens, Inc. has expanded their thread repair insert line with several models meeting MS (Military Standards) and NAS (National Aerospace Standards) quality requirements. Jergens' expanded offering meets MS51830, MS51831, MS51832, NAS1394, and NAS1395 military and aerospace specifications. All Jergens keylocking inserts are easy to install with standard drills and taps-no special...

Read More »
Blind Threaded Inserts offer one-sided installation.
Threaded Fastener Inserts

Blind Threaded Inserts offer one-sided installation.

Offered in aluminum, brass, steel, and stainless steel, Atlas® SpinTite® Inserts install from accessible front side of panel with only single mating screw required to complete final component attachment. Units serve as alternatives to tapped holes, weld nuts, rivets, and self-drilling or tapping screws and can promote close-to-edge mounting. Suited for panels of any hardness as thin...

Read More »
Threaded Fastener Inserts

Fastener Insert does not require any tapping.

SmartSert, installed in plastic or aluminum-based materials without pre-tapped hole, does not cut base material when installed. Instead, material flows around insert to eliminate cracking and other damage. Use of this product enables bolts to be tightened to higher torques without stripping and prevents bolt dislodging by vibration. Potential applications include scooter engines, aerospace...

Read More »
Threaded Fastener Inserts

Nuts and Washers from Ondrives Ltd

A vast array of nuts and washers are available to purchase off the shelf from Ondrives Ltd of Chesterfield. The range of nuts offered encompass just some of the following - binx, blind rivet, Disk-Lock®, dome, hexagon dome cap, full type, hexagonal, Nyloc, nylon dome-hexagonal-wing, thin hex lock, washer, Well® and wing. Different materials are also available as standard from steel,...

Read More »
Inserts suit high-load attachment applications.
Threaded Fastener Inserts

Inserts suit high-load attachment applications.

Atlas(TM) MaxTite® blind threaded inserts provide permanent metal threads in blind attachment applications, where only one side of workpiece is accessible for fastener installation and final component assembly. Inserts can be used in panels as think as .020 in. Available in flathead and countersunk types, units offer thread sizes from No. 4-40 through Â-½ in.-13 and M3 through M12. Rib...

Read More »
Rivet Nuts suit high load attachment applications.
Threaded Fastener Inserts

Rivet Nuts suit high load attachment applications.

Atlas(TM) MaxTite® Threaded Rivet Nuts feature thicker thread and heavier wall than standard rivet nuts. They provide strong, permanent threads in blind attachment applications where only one side of workpiece is accessible for fastener installation and final component assembly. Flathead and counterunk nuts can be utilized in panels as thin as .020 in. Thread sizes range from No. 4-40...

Read More »
Threaded Inserts match clamp force of weld and clinch nuts.
Threaded Fastener Inserts

Threaded Inserts match clamp force of weld and clinch nuts.

Avdel® Hexsert® blind threaded inserts work with hard and non-ductile materials, as well as thin sheet alloys, plastics, and composites. They are available in M6, M8, and M10 large flange hexagonal steel designs in wide range of protective finishes to improve corrosion resistance. Band annealing process softens wall of insert to provide sufficient ductility for installation while...

Read More »
Blind Threaded Inserts fit panels as thin as .020 in.
Threaded Fastener Inserts

Blind Threaded Inserts fit panels as thin as .020 in.

Atlas(TM) SpinTite® blind threaded inserts are for applications where only one side of workpiece is accessible for fastener installation and final component assembly. Their use eliminates need for additional hardware beyond mating screw. Aluminum, brass, steel, and stainless steel inserts come in unified and metric thread sizes from No. 6-32 to Â-½ in.-16 and M4-M10. They can be...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics