HYDROKAPILLA NBU 20 HFE US Grease is corrosion resistant.
HYDROKAPILLA NBU 20 HFE US Grease is suitable for lubrication of plain and rolling bearings and chains. Unit can be applied using brush or an automatic spraying system. Products helps user to prevent chain seizure and is suitable for drives which are used in wet amusement park rides and carrying chains for textile steamers. Grease offers penetration into pin and bushings.
Read More »HTSX Thermal Interface Material is compliant to RoHS-2 standards.
Operated in -50°C to +200°C temperature range, HTSX Silicone Thermal Interface Material offers thermal conductivity of 1.58 W/mK (guarded hot plate) and 1.05 W/mK (heat flow). Used as heatsinks or as thermal gap filler for dissipating heat between electronic devices, HTSX is offered in 35 ml syringe and 830 g cartridge.
Read More »HTSX Thermal Interface Material is compliant to RoHS-2 standards.
Operated in -50°C to +200°C temperature range, HTSX Silicone Thermal Interface Material offers thermal conductivity of 1.58 W/mK (guarded hot plate) and 1.05 W/mK (heat flow). Used as heatsinks or as thermal gap filler for dissipating heat between electronic devices, HTSX is offered in 35 ml syringe and 830 g cartridge.
Read More »Sarcon 20GAR Thermal Interface Material is suitable for complex die-cut shapes.
Sarcon® 20GAR Thermal Interface Material is available in rolls, pre-cut sheets or it can be die-cut to the required shape. Unit is suitable for appliance motor drives, electric vehicle motor drives, solar inverters and inductive heating cookers applications. 0.2 mm thick material is operated in a temperature range of ‐40°C to +150°C and delivers thermal conductivity of 3.0 W/m•K. Sarcon®...
Read More »The Future of Electric Motors in the Automobile Industry
This eBook discusses the future of electric parts in the automobile industry and some of the challenges associated with them, while offering expert solutions.
Read More »Sarcon 20GAR Thermal Interface Material is suitable for complex die-cut shapes.
Sarcon® 20GAR Thermal Interface Material is available in rolls, pre-cut sheets or it can be die-cut to the required shape. Unit is suitable for appliance motor drives, electric vehicle motor drives, solar inverters and inductive heating cookers applications. 0.2 mm thick material is operated in a temperature range of ‐40°C to +150°C and delivers thermal conductivity of 3.0 W/m•K. Sarcon®...
Read More »Thermal Interface Material comes with UL94 flame retardant rating.
Sarcon® EGR-11F Thermal Interface Material is available in sheet thicknesses of 0.5, 1.0, 1.5mm. Unit comes in 300mm x 200mm maximum dimension and offers thermal conductivity of 1.0 W/m°K and a thermal resistance of 1.05°Cin2/W. Product is operated in a temperature range of -30 to +120°C. Material enables user to fill unwanted air gaps to provide efficient heat transfer.
Read More »Thermal Interface Material comes with UL94 flame retardant rating.
Sarcon® EGR-11F Thermal Interface Material is available in sheet thicknesses of 0.5, 1.0, 1.5mm. Unit comes in 300mm x 200mm maximum dimension and offers thermal conductivity of 1.0 W/m°K and a thermal resistance of 1.05°Cin2/W. Product is operated in a temperature range of -30 to +120°C. Material enables user to fill unwanted air gaps to provide efficient heat transfer.
Read More »Easy to Apply Form-in-Place Thermal Gap Filler
Carteret, NJ - Tuesday, August 22, 2017 - SARCON® SPG-20A from Fujipoly® is an easy to dispense, low-viscosity silicone compound that exhibits a thermal conductivity of 2.0 W/m°K and a thermal resistance of only 2.1°K•cm2/W. When applied between heat-generating components and a nearby heat sink or spreader, the form stable thermal material completely fills unwanted gaps as small as 0.08mm....
Read More »Easy to Apply Form-in-Place Thermal Gap Filler
Carteret, NJ - Tuesday, August 22, 2017 - SARCON® SPG-20A from Fujipoly® is an easy to dispense, low-viscosity silicone compound that exhibits a thermal conductivity of 2.0 W/m°K and a thermal resistance of only 2.1°K•cm2/W. When applied between heat-generating components and a nearby heat sink or spreader, the form stable thermal material completely fills unwanted gaps as small as 0.08mm....
Read More »Thermal Gap Filler Pads come with UL94 flame retardant rating.
Available in four sheet thicknesses of 0.5, 1.0, 1.5 and 2.0mm up to maximum dimension of 300mm x 200mm, Sarcon® PG80A Thermal Gap Filler Pads are operated from -40 to +150°C temperature range. Exhibiting thermal resistance below 0.08°C-in2/W at 14.5 PSI, units are suitable for delicate or wide-variation component heights applications.
Read More »Complete Water Solutions Offers Wide Range of Water Treatment Equipment
Complete Water Solutions provides full installation tailored to your water treatment needs. Check out the video to learn more.
Read More »