Heaters

Infrared Heaters resist wet and corrosive environments.

Suntube gas infrared tube heaters are fabricated from premium grade stainless steel, including burner/blower enclosures, combustion chamber, heat exchanger and heat directing efficient reflectors. Systems operate on natural gas or LP/propane gas, and are environmentally safe. Straight and U-tube models are available with 40,000 to 200,000 BTUH inputs, with tube lengths from 10 to 70 ft.

Read More »
Electric Baseboard Heaters are CSA approved to UL standards.
Heaters

Electric Baseboard Heaters are CSA approved to UL standards.

BAI/BASI Series architectural heaters provide large amounts of quiet heat where fan noise is distracting and unacceptable. Constructed of heavy gauge steel, units are available up to 4 kW. BII/BISI Industrial heaters are constructed of heavy gauge, painted steel with screw assembly for additional strength and are available up to 2.5 kW. BCI/BCSI commercial heaters feature aluminum cover with...

Read More »
Stackable Chambers free-up laboratory space.
Environmental Chambers

Stackable Chambers free-up laboratory space.

Stability and photostability chambers meet ICH guidelines for general stability testing of new drug substances and products, long term and accelerated refrigerated testing, and photostability testing. Available in 10 and 30 cu ft sizes, chambers provide temperature from 5 to 60°C and humidity from 20 to 98% RH to create repeatable environmental conditions. They have stainless steel...

Read More »
Protective Sleeves save labor.
Sleeves

Protective Sleeves save labor.

Coated, ballistic Cordura(R) Sidewinder sleeves, with industrial hook and loop closure, allow easy assembly and removal. Sleeves install without disconnecting hydraulic, electrical, and pneumatic hose and cable bundling and can be removed easily for hose maintenance. Material is available in variety of circumferences and bulk lengths to 150 ft for OEM and maintenance operations.

Read More »
Insulation improves HVAC system operation.
Insulation

Insulation improves HVAC system operation.

Duct Wrap Insulation is resilient, blanket-type insulation installed on HVAC ductwork. Composed of glass fibers bonded together with thermosetting resin, it helps control heat loss and condensation during system operation. Ductwork enclosed in duct wrap can handle conditioned air at temperatures from 35° to 250° F for faced duct wrap and 35° to 350° F for unfaced wrap....

Read More »
Electrical Switches are sealed via O-ring.
Switches

Electrical Switches are sealed via O-ring.

Series M PCB-mounted toggle, rocker and pushbutton switches have interior bushing area sealed with O-ring surrounding actuator. System seals out contaminants and protects against washing fluids and other liquids. Terminals are epoxy sealed to lock out contaminants such as flux and solvents. All models can be specified single or double pole, are UL and CSA recognized, have UL94V-0 flammability...

Read More »
Metal Thread Inserts fit wood and composition board.
Inserts

Metal Thread Inserts fit wood and composition board.

Three metal thread inserts install without need for special tools. Knife thread inserts, available with coarse and fine internal threads, furnish holding power in hard woods such as oak, maple, and mahogany. Finsert thread inserts provide strong metal threads in softer materials, and prevent splintering, splitting, and thread pullout. Hex Drive thread inserts are for soft materials such as pine,...

Read More »
Filter Driers clean refrigerant in one pass.
Dryers

Filter Driers clean refrigerant in one pass.

Dual in-line One-Pass Filter Driers provide 35 column in. of desiccant that is able to clean and dehydrate refrigerant on single pass to very near ARI-700 specifications. Installing filter on inlet side of purge tank helps protect purge tank from corrosion and acid build-up, helps prevent corrosion build-up on purge tank heat transfer coils, and helps remove acid and moisture from chiller's...

Read More »
Resin Dryer matches speed of plastics processors.
Air / Hot Air Dryers

Resin Dryer matches speed of plastics processors.

LPD(TM) Low Pressure Dryer dries resin batches of 400 lbs within 4 hours, and requires 80% less energy than 100 lb/hr desiccant dryers. It uses vacuum to pull moisture from within pellets and carries out heating and vacuum drying simultaneously in separate stations. It essentially transforms batch processes into continuous processes. Dryer makes it possible to change materials or colors without...

Read More »
Conveyorized Oven has NEMA-12 enclosure.
Ovens

Conveyorized Oven has NEMA-12 enclosure.

CE-compliant Small Conveyorized Curing/Drying Oven features HEPA-filtered, recirculated airflow for operation at Class 100 conditions and better. Corrosion-resistant, stainless-steel conveyor and Teflon®-coated guide rails minimize particulate generation. Oven features variable-speed conveyor and is available with operating temperatures up to 500°F. It handles small, dense loads with...

Read More »

All Topics