Air Heating Burner handles temperatures to 2,500°F.
Burners

Air Heating Burner handles temperatures to 2,500°F.

RatioAir velocity burner has integral packaged blower that is available in 4 different models with capacities from 1-5 mm BTU/hr. Ratio regulator automatically compensates for changes in operating conditions and ensures ratio-controlled operation over turndown range of more than 50:1. Direct drive air butterfly eliminates linkages, and burner achieves gas velocities of up to 500 ft/sec. It suits...

Read More »
Vertical Conveyor Oven is gas heated to 750°F.
Ovens

Vertical Conveyor Oven is gas heated to 750°F.

With workspace dimensions of 24 x 26 x 53 in., No. 917 utilizes ½ hp motor drive, variable from .05-9 ipm, to move 29, 18 x 5 in. trays vertically through load/unload zone. It has 350,000 BTU/hr installed in modulating natural gas burner, while 2,000 cfm, 2 hp, recirculating blower provides horizontal airflow to workload. Construction characteristics include aluminized steel exterior and...

Read More »
Paddle Dryer reaches low moisture levels continuously.
Air / Hot Air Dryers

Paddle Dryer reaches low moisture levels continuously.

Indirectly heated K-S Paddle Dryer dries to moistures of 0.5-0.1% or lower. Mixing action of dual intermeshing agitators with heated wedge shaped paddles provides for uniform heat transfer. Since product moves through dryer by displacement, residence time is controlled by feed rate and overflow weir height. Heating may be done with steam or thermal fluid. Vapor tight designs are offered for...

Read More »
Compressed Air Dryers consume no electricity.
Dryers

Compressed Air Dryers consume no electricity.

Series CDA Alternate Cooling Source Dryers provide efficient air treatment when connected to ammonia circuit or chilled water or glycol supply, compressed air piping, and condensate drain line in facility. Capacities range from 75-19,200 scfm at 100 psi. Compressed air pressure dew point of 38°F is achieved with ammonia circuit and Model CDAN dryer. PDP that is 5-7°F above inlet...

Read More »
Decentral Motor Switch provides soft starts/stops of motors.
Switches

Decentral Motor Switch provides soft starts/stops of motors.

Mounted on the wall or directly to motor, DMS 300 is suited for soft starting and stopping of motor in either direction when no variable speed control is required. Housed in IP66/NEMA 4X enclosure, product is available with power range to 4 hp, 3-phase, 380-480 Vac. Dual part principle facilitates commissioning and service, while motor and cabling are protected by thermistor or built-in...

Read More »
Inserts/Grades provide multi-directional turning.
Inserts

Inserts/Grades provide multi-directional turning.

MDT(TM) Threading Inserts, available in CP500 grade, feature 55° whitworth threads, and partial profiles of 60° for UN and ISO threads. They can produce right- and left-handed threads both toward and away from chuck. Grooving inserts include CP500 grade, and in 13 mm style, are suited for small bore and face machining. Grade TK150 works with cast irons and hardened steel. MDT system...

Read More »
Power Switch allows use of smaller size transformers.
Switches

Power Switch allows use of smaller size transformers.

Model FS6X1220RT, suited for dc/dc forward or fly-back power supply applications, integrates fully avalanche-rated SenseFET with current mode PWM IC. Off-line power switch offers over-voltage, over-load, cycle-by-cycle current limit, and thermal shutdown protection. Product uses integrated 300 kHz oscillator and provides line-under voltage detection, remote sleep on/off, under-voltage lock out,...

Read More »
Circulator has temperature range of -60 to 200°C.
Chillers

Circulator has temperature range of -60 to 200°C.

Unistat 169W has operating temperature range of -60 to 200°C with increased cooling of 40 kW at -40°C. Hydraulically-sealed circulator provides efficient temperature control for variety of processes and applications. Low fluid volume and high cooling-power density provide fast heating and cooling rates and require less power and thermal fluid.

Read More »
Vibrating Fluid Bed Processor dries fibrous products.
Air / Hot Air Dryers

Vibrating Fluid Bed Processor dries fibrous products.

Equipped with natural frequency drive system that handles difficult-to-fluidize fibrous materials, unit employs long-stroke, low-frequency operation that positively conveys wet products through processor as drying occurs. Unit has thermal insulation system and construction that allows hood, air distribution/conveying deck, and plenum to expand independently. Rubber piston drive absorbs...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers