Plate Fin Coils suit HVAC applications.
Coils

Plate Fin Coils suit HVAC applications.

Duralite(TM) Plate Fin Coils offer tube construction of 5/8 in. OD x .028 in. thick copper. Headers are manufactured of .060 to .134 in. thick copper, and casings and baffles are constructed of 14 Ga. or 16 Ga. galvanize steel. Steam coils are available in Centifeed (steam distributing tube type), Standard (opposite end connections), and Two Row Return Bend Construction. Fins are available in...

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.
Other Milling Cutters

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Water Bath keeps viscometers hot and cold.
Laboratory Baths

Water Bath keeps viscometers hot and cold.

Model TC-601 Compact Refrigerated Circulating Water Bath works with company's viscometers, rheometers, and accessories. Its small footprint, 8 x 16 in., minimizes use of valuable laboratory bench space. It comes with heating and cooling capability over operating range from -20 to 200 deg C, and is available with manual or programmable controller. Unit operates in stand-alone mode. To use, just...

Read More »
Zone Heater provides uniform platen temperature.
Heaters

Zone Heater provides uniform platen temperature.

Maxi-Zone High Temperature Insertion Heater heats large platens for hot metal presses requiring continuous sheath temperatures to 2000 deg F. It provides 2 or 3 independently-controlled temperature zones along heater sheath, for better control over hot metal forming processes. Heater is available in lengths from 8 to 172 in., and diameters from 0.685 to 0.935 in., for nominal platen passages from...

Read More »
Hot Box safely heats eight 55 gallon drums.
Heaters

Hot Box safely heats eight 55 gallon drums.

Sahara horizontal Hot Box Model S8 uses steam up to 200 psig, and can reach temperatures up to 300 deg F. Constructed of 304 stainless steel, Hot Box replaces homemade hot rooms and band heaters. It provides 110 gallon spill-containment capacity. Alternative capacities, electric model, and carbon-steel construction are also available.

Read More »
Batch Ovens are built to size with various configurations.
Ovens

Batch Ovens are built to size with various configurations.

Ovens are available with top or rear-mounted heat chambers, plate or insulated floors, cart tracks, overhead conveyer headers, full horizontal air, shelf, and hanging or flat-bed carts. Sizes range from 144 to 2,800 cu ft capacities, in gas and electric configurations from 450 to 850 deg F, with digital controls, adjustable air ducts, and fan-forced air.

Read More »
Drying System eliminates exhaust to atmosphere.
Desiccant and Membrane Dryers

Drying System eliminates exhaust to atmosphere.

Self-contained, closed-cycle, fluid bed-drying system dries solvent-based products, pesticides, and chemicals. Integral bag collector, atop of fluid bed dryer, permits processing of powders down to 10 microns, capturing 100% of entrained product and returning material for further processing and discharge. System cools exhaust air to condense and reclaim solvent and/or water for reuse, without...

Read More »
Refrigerated Dryers keep compressed air dry.
Dryers

Refrigerated Dryers keep compressed air dry.

RD Series refrigerated compressed air dryers remove moisture from indoor air lines while providing 35 to 38 deg F dew point, low pressure drops, and no heat exchanger freeze-ups at low loads. It has non-cycling refrigerant compressor, CFC-free R-22 refrigerant, and capacity control valve to maintain steady dew point when flows fluctuate. Models are available to handle flows from 10 to 3,000 scfm...

Read More »
Coolers/Condensers feature copper coil construction.
Condensers (Heat Transfer)

Coolers/Condensers feature copper coil construction.

M Series closed circuit Fluid Coolers and Evaporative Condensers, with copper coil technology, perform in harsh conditions. Prop fan, constructed of glass reinforced polypropylene, pulls air through top of unit instead of pushing air out. Condensers have nominal capacity of 50 to 340 tons while Fluid Coolers range from 19 to 130 tons and can accept water temperatures up to 150 deg F. All units...

Read More »

All Topics