PlasmaDyne system features programmable treating heads.
Surface Treatment Equipment

PlasmaDyne system features programmable treating heads.

Easily integrating into folding production lines and including precise, adjustable handling brackets, PlasmaDyne is available with 1 - 4 heads, depending on the number of glue lines required. Delivering highly effective surface treatment for both conductive and non-conductive applications. Meeting surface treatment needs such as improving adhesion of coatings, laminates and glue system is...

Read More »
Improve Efficiency with Pneumatic Spray Gun
Spray Guns

Improve Efficiency with Pneumatic Spray Gun

Polyset, a leading manufacturer of polymer materials and expansion joint systems, offers a pneumatic dispensing gun engineered to facilitate the installation of Ply-Krete® and Ply-Seal® Joint Systems for bridges, parking structures, architectural applications/stadiums, airports, and wastewater treatment facilities. It may also be used with 2-part coatings that are spay applied. The Polyset FP...

Read More »
Radio Frequency Company
Dryers

Radio Frequency Company

After the very successful introduction of the air-cooled Bantam-Series Post-Baking dryers two years ago, RFC is now offering the air-cooled design in a more powerful two-zone design. Dubbed the “Double-Bantam,” it maintains the simplistic yet robust design of the single zone dryers, and carries forward the lower capital and installation costs when compared to the larger Ultra-Series Dryers....

Read More »
RF Switches operate through 6GHz frequency range.
Switches

RF Switches operate through 6GHz frequency range.

Suitable for test and measurement systems as well as Wi-Fi, ZigBee and Bluetooth routers, sensors, appliances, RF Switches are used to route high frequency signals through transmission paths. Operating over frequency ranges through 6GHz, units are available in single-pole-double-throw(1:2), single-pole-multiple-throw and double-pole-double-throw. Units provide flexibility to create matrices.

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
Sealed Switches & Controls from Carling Technologies
Switches

Sealed Switches & Controls from Carling Technologies

ST-Series Sealed Toggle Switch Designed to comply with MIL-DTL-3950G requirements for environmentally sealed toggle switches, Carling Technologies ST-Series Sealed Toggle Switch features innovative design and performance principles that are sure to withstand the most demanding applications. The ST-Series features a toggle seal composed of dynamic silicone material that bonds to the metal toggle,...

Read More »
2200°F Inert Atmosphere Pit Furnace from Grieve
Furnaces

2200°F Inert Atmosphere Pit Furnace from Grieve

No. 1040 is a 2200°F (1204°C), inert atmosphere pit furnace from Grieve, currently used for heat treating automotive parts in baskets at the customer’s facility. Workspace dimensions of this furnace measure 36” wide x 36” deep x 48” high. 78 KW are installed in heavy gauge, high temperature Kanthal AF alloy wire heating elements of rod overbend design and powered through a low voltage...

Read More »
Stride SE2 Series Switches come in IP30 metal casing.
Switches

Stride SE2 Series Switches come in IP30 metal casing.

Available with 12-48 VDC or 18-30 VAC redundant power input, Stride SE2 Series Switches feature “plug and play” design. Having wide operating temperature range, units feature reverse polarity protection. Offering up to 16 ports, product also come with Gigabit Ethernet and SFP options. Meeting IEC60068-2 standards, switches are designed for noisy industrial power and industrial environment.

Read More »
Lucifer Furnaces HS8 Series for High Speed Steel Heat Treating
Furnaces

Lucifer Furnaces HS8 Series for High Speed Steel Heat Treating

Lucifer Furnaces, Inc. has designed a delivered a dual chamber furnace ideal for heat treating high speed steels. The HS8 Series, built with rugged 12-gauge sheet steel and reinforced throughout, heats to 2450°F in the upper chamber with silicon carbide heating elements mounted across the roof and below the hearth. Elements are a solid bar type with termination connections for easy service via...

Read More »
Flexible Welding Enclosure
Welding Chambers

Flexible Welding Enclosure

When welding titanium and zirconium joints it is important that the welding zone is purged of oxygen to a level as low as 10 parts per million (ppm). A flexible welding chamber is available from Huntingdon Fusion Techniques HFT® for a fraction of the cost of a rigid welding chamber. Flexible Welding Enclosures® provide a technically viable option to what are very expensive rigid enclosures or...

Read More »
LNX-C500 Series 5-port Ethernet Switch supports EOT at -40
Switches

LNX-C500 Series 5-port Ethernet Switch supports EOT at -40

Designed with 5*10/100 RJ45 Ethernet ports with 1Gbps speed, LNX-C500 Series 5-port Unmanaged Ethernet Switch can be used in factory automation and wastewater treatment plants. Supporting 12-48VDC redundant power input with reverse polarity and overload current protection, product can be DIN-rail or wall mounted. LNX-C500 has operating temperature STD from -10°C to 70°C and provides high EFT,...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics